ARCHITECTURAL AREA LIGHTING

® 

ARCHITECTURAL AREA LIGHTING

The 

ultimate in 

style and 

technological 

sophistication 

LED Illumination 

ENERGY EFFICIENCY 

The light sources employed in the 

Parkway Square family of fixtures 

are the most efficient sources 

commercially available today, 

including energy efficient LED, 

induction, metal halide and compact 

fluorescent. The result is more light 

with less energy consumption. 

LONGEVITY 

AAL manufactures its products 

to have a life span as long as 

the buildings and spaces they 

illuminate. The primary material 

used for all our products is 

aluminum to resist corrosion and the 

need for maintenance. Aluminum 

will not need the periodic refinishing 

required of steel products that will 

eventually rust and corrode. All our 

internal parts and fasteners are 

made of aluminum or stainless steel. 

Lamp enclosures are kept dust free 

and dry to prevent light degradation 

and maintain a high level of energy 

efficiency. 

SUSTAINABILITY 

AAL develops our products 

with recycling and resource 

management in mind. We recycle 

all incoming packaging materials. 

Our state-of-the-art finishing system 

uses eco-friendly cleansing and 

preparation chemicals that are 

harmless enough to send to the 

drain without further processing. 

Finally, AAL makes the Parkway 

Square, like all AAL products, 

with renewable materials such as 

aluminum and stainless steel. 

PATENTS PENDING 

TM 

MADE IN 

USA 

2

Wall sconce 

Accent (small) Scale 

Contents 

Table of 

LED Solutions.......................................2 

Decorative Vertical LED...............6 

Technology & Performance.......8 

Elevated Scale.................................10 

Pedestrian Scale LED...........12 

Accent Scale LED.................14 

Arm & Pole Options......................16 

Sconce LED.......................................18 

Bollard LED........................................20 

bollard 

CodeLink SM 

Pedestrian (Medium) Scale 

Instantly retrieve AAL product spec 

sheets by scanning these codes with any 

compatible Smartphone and QR reader. 

See pages 12, 14, 18 and 20 . 

Parkway Square 3

LED Solutions 

Pedestrian Scale 

For mounting heights up to 15' 

Accent Scale 

For mounting heights up to 10' 

Horizontal LED 

Higher Performance 

Vertical LED 

Decorative 



Vertical LED 

Decorative 

• 71.7w MicroEmitter 

(60 LEDs) 

• 3281 Lumens 

• 46 lpw 

• 3500k or 5100k 

• types ii, iii, iv, and v 

• 53w led (42 leds) 

• 2300 lumens 

• 43 lpw 

• 5100k 

• types iiI and v 



• 50 lpw 

• 3500k or 5100k 

• types I, iiI and v 

• 20.6w led (18 leds) 


• 45 lpw 

• 5100k 

• types iiI and v 

• Exclusive upgradeable 

LED technology 

• Replaceable 

MicroEmitter modules 

• LifeShield diode 

protection standard 

• Available with Angled 

Hood only 

• Bright, beautiful 

decorative illumination 

• Available with all five 

decorative screens 

• Available with all three 

hood styles 

• Lightly diffused acrylic 

lens standard 

• Direct illumination of the 

ground plane 

• Canted LEDs offer three 

distribution options 


Hood only 

• High aesthetic option 

for lower mounting 

heights 



• Available with all 

three hood styles 

• Lightly diffused acrylic 

lens standard 

AAL CodeLink SM 

AAL AAL CodeLink SM SM 

PKWM LED Spec Sheet 

PKWS LED spec sheet 

PKWS LED Spec Sheet 

4

Wall Sconce 

Entrance Illumination 

Bollards 

Path and Driveway Illumination 

Decorative Sconce LED 

• 19.5w, 21.6W, 28W, 36.4W led 

(15, 18, 24, 30 leds) 

• 580 -1392 lumens 

• 29 - 51 lpw 

• 3500k or 5100k 






• 50 lpw 

• 3500k or 5100k 


Vertical LED 

Decorative 



• 40 lpw 

• 5100k 

• types iii and v 

• Includes an integral secondary 

source to provide illumination to 

path of egress 

• Available with all five decorative 

screens 

• Lightly diffused acrylic lens standard 

• Mounting heights from 8 to 16 feet 

• Direct illumination of the 

ground plane 

• Canted LEDs offer three 

distribution options 


Hood only 

• High aesthetic option 

for lower mounting 

heights 




Hood only 

AAL CodeLink AAL CodeLink SM 

SM 


PKWS LED spec sheet 

PKW Sconce LED Spec Sheet 

PKWB LED Spec Sheet 

Parkway Square 5

PKWS-LED-PR4 

PKWM-LED-PR4 

6

Excellence 

refined 

The appointed styling 

of Parkway Square is 

more on parallel with 

a fine piece of art than 

an outdoor luminaire. 

Parkway Square 7

Decorative Vertical LED 

Configurations 

The unique design of Parkway Square 

allows you to mix-and-match between optical 

systems, hood styles, and decorative screen 

options to truly customize your luminaire. 

angled hood - ANG * 

straight hood - STR / Indirect - ind ** 

(underside of Indirect hood in high reflectance white) 

1 Select 

Step 

desired hood 

Parkway Square features three 

designer hoods, each with a distinct 

design statement, available in painted 

aluminum to match the fixture, or natural 

copper and stainless steel. 

double hood - dbl** 

* Not available with PKSA/PKSP 

* * Not available with PKSA/PKSP and PKWB 

stainless steel 

hood - sts 

copper 

hood - COP 

Specify hoods in either painted 

aluminum, natural copper, or stainless 

steel to complement other design 

elements on the project. 

Choose the optical system that best 

suits your project needs. 

PKWM-Vertical LED (VL3/VL5) 

PKWS-Vertical LED (GLA) 

PKWB-Vertical LED (GLA) 

PKSA/PKSP-Vertical LED 

Step 

2 Select 

optical system 

PKSA/PKSP 

Vertical LED 

PKWM-Vertical LED 

(VL3/VL5) 

8 

PKWS-Vertical LED 

(GLA) 

PKWB-Vertical LED 

(GLA)

To customize the look of the luminaire, 

add a decorative screen in either a contemporary style 

such as Wheat or Infinity, or a more traditional style 

with Offset, Trio or Shutter. Submit your own design or 

logo to truly customize the luminaire. Each screen is 

created with a water laser to ensure smooth lines and 

consistency with each luminaire. 

Decorative 

Screens 

Step 

3 Select 

decorative screen 

option 

TRIO 

DSTR 

WHEAT 

DSWH 

INFINITY 

DSIN 

OFFSET 

DSOF 

SHUTTER 

DSSH 

CUSTOM 

DSCS 

Specify screens in either painted aluminum, natural 

copper, or stainless steel. 

stainless steel 

Screen - sSP 

copper 

Screen - CPR 

Parkway Square 9

LED Technology & Performance 

Pedestrian Scale Medium Housings Accent Scale Small Housings 

Horizontal LED Vertical LED Horizontal LED Vertical LED 

BUG Rating BUG Rating BUG Rating BUG Rating 

B2 U0 G2 B1 U2 G1 B1 U0 G0 B1 U2 G1 

UP LIGHT 

HORIZONTAL LED 

180° 


VERTICAL LED 

VERTICAL LED 

180° 

UP LIGHT 

0 lm. 0% 102 lm. 3.1% 0 lm. 0% 33 lm. 3.5% 

UH 

UH 

100° 

100° 

100° 

100° 

UL 

BACK LIGHT 

FORWARD LIGHT 

BACK LIGHT 

UL 

1622 lm. 49.4% 

1660 lm. 50.6% 

967 lm. 49.4% 

1099 lm. 47.7% 

1099 lm. 47.7% 

450 lm. 48.3% 

FORWARD LIGHT 

993 lm. 50.7% 

450 lm. 48.3% 

BVH 90°= 0.3% 

BVH 90°= 4.3% 

FVH 90°= 0.2% 

FVH 90°= 4.3% 

BVH 90°= 0.3% 

BVH 90°= 1.3% 

FVH 90°= 0.3% 

FVH 90°= 1.3% 

BH 80°= 22.2% 

BH 80°= 21.4% 

FH 80°= 22.0% 

FH 80°= 21.4% 

BH 80°= 4.8% 

BH 80°= 15.8% 

FH 80°= 5.5% 

FH 80°= 15.8% 

BM 60°= 18.8% 

BM 60°= 19.1% 

FM 60°= 20.3% 

FM 60°= 19.1% 

BM 60°= 28.5% 

BM 60°= 25.5% 

FM 60°= 29.0% 

FM 60°= 25.5% 

BL 30°= 8.1% 

BL 30°= 2.9% 

FL 30°= 8.1% 

FL 30°= 2.9% 

BL 30°= 15.8% 

BL 30°= 5.7% 

FL 30°= 15.9% 

FL 30°= 5.7% 

0° 

0° 

Horizontal LED Vertical LED Horizontal LED Vertical LED 

Photometry Photometry Photometry Photometry 

Legend: 

PKWM T5 

Legend: 

60LED-BW 

Legend: 

PKWM T5 55LED-BW PKWS T5 36LED-BW PKWS T5 18LED-BW 

2.00 

2.00 

0.20 

0.50 

1.00 

2.00 

0.00 

0.20 

0.50 

1.00 

1.00 

0.00 

1.00 

0.10 0.50 

2.00 

0.20 

0.00 

0.10 

0.20 

1.00 

0.50 

0.00 

0.10 

0.10 

Mounting Height: 12 feet 

Total flux: 3281 lm 

Watts: 71.7 W LPW: 46 



Watts: 53 W LPW: 43 






Watts: 20.6 W LPW: 45 

10

Photometry 

Wall Sconce Bollards 

PKSA LED PKSP LED Horizontal LED Vertical LED 

BUG Rating BUG Rating BUG Rating BUG Rating 

B0 U3 G1 B0 U4 G1 B1 U0 G0 B0 U2 G1 

PKSA LED 

PKSP LED 

180° 

UP LIGHT 

463 lm. 41% 829 lm. 60% 

UH 


VERTICAL LED 

180° 

UP LIGHT 

0 lm. 0% 51 lm. 9.2% 

UH 

100° 

100° 

BACK LIGHT 

331 lm. 29% 

271 lm. 19% 

UL 

FORWARD LIGHT 

331 lm. 29% 

292 lm. 21% 

BACK LIGHT 

967 lm. 49.4% 

253 lm. 45.5% 

UL 

UL 

FORWARD LIGHT 

993 lm. 50.7% 

253 lm. 45.5% 

BVH 90°= 1.2% 

BVH 90°= 0.7% 

FVH 90°= 1.2% 

FVH 90°= 1% 

BVH 90°= 0.3% 

BVH 90°= 9.2% 

FVH 90°= 0.3% 

FVH 90°= 9.2% 

BH 80°= 5% 

BH 80°= 2.7% 

FH 80°= 5% 

FH 80°= 3.3% 

BH 80°= 4.8% 

BH 80°= 17.8% 

FH 80°= 5.5% 

FH 80°= 17.8% 

BM 60°= 14.3% 

BM 60°= 9% 

FM 60°= 14.3% 

FM 60°= 9.6% 

BM 60°= 28.5% 

BM 60°= 14.9% 

FM 60°= 29.0% 

FM 60°= 14.9% 

BL 30°= 8.3% 

BL 30°= 7% 

FL 30°=8.3% 

FL 30°= 7% 

BL 30°= 15.8% 

BL 30°= 3.6% 

FL 30°= 15.9% 

FL 30°= 3.6% 

0° 

0° 

PKSA LED PKSP LED Horizontal LED Vertical LED 

Photometry Photometry Photometry Photometry 

PKSA UBDS Legend: 24LED-BW PKSP USDB A=2.00 B=1.00 30LED-BW 

C=0.50 D=0.20 E=0.10 

E 

E 

E 

E 

E 

E 

PKWB T5 A=2.00 B=1.00 36LED-BW C=0.50 D=0.20 E=0.10 PKWB T5 12LED-BWE 

0.01 

0.05 

0.1 

2.00 

0.5 0.00 

1.0 

0.2 

0.10 0.20 

0.05 0.50 

0.02 

0.01 

0.00 

2.00 1.00 

E 

0.2 

0.5 

0.1 

1.0 

2.0 

0.00 

0.2 

0.5 

1.0 

2.0 

0.00 

E 

0.1 



Watts: 28 W LPW: 40.18 



Watts: 36.4 W LPW: 38.24 

Mounting Height: 3.5 feet 



E 

Mounting Height: 3.5 feet 

EE 



Parkway Square 11

Elevated Scale 

18' 

20’ 

16' 

PKSP 

PKWM (2) 

14' 

20’ 

12' 

PKWM 

10' 

PKSA 

20’ 

PKWS 

8' 

6' 

20’ 

4' 

2' 

20’ 

0' 

Luminaire PKSP-UBDS/ PKSA-DB (Large/Small Sconce) PKWM (Pedestrian) pKWS (Accent) pKWM(2) (Pedestrian) 

Hood — ANG 

L2A L2P 

STR 

L2R 

ANG 

L2P 

optics 30LED-BW/15LED-BW VL3 55LED-BW GLA 18LED-BW t3 60LED-BW 

Options dSTR — — — 

Arm — pSA-BU — pSA-BU(2) 

Pole — pR4-4R12/BC5-4 pS3-3S8 pS4-4S16/ACBcS 

12

18' 

PKWM 

16' 

PKWM (2) 

14' 

PKWS 

12' 

NEED 

PKWS 

10' 

8' 

6' 

PKWB 

4' 

2' 

0' 

pKWS (Accent) pKWM(2) (Pedestrian) pKWB (Bollard) pKWM/PKWS (Pedestrian/Small) 

dBL STR — dBL/ANG 

GLA 18LED-BW VL5 55LED-BW GLA 12LED-BW VL3 55LED-BW/GLA 18LED-BW 

dSIN — dSOF dSWH 

— pSA-TU(2) — pSWM-BD/PSWM-TD 

pS3-3S10 pS4-4S12/ACBCS — — 

Parkway Square | 13 13 |

Pedestrian Scale LED 

Medium Housing 

HOOD 

ANG – Angled Hood 

STR – Straight Hood 

CodeLink SM 

Scan code 

to download 

PKWM Spec 

Sheet 

DBL – Double Hood 

ORDERING example – Pedestrian (Medium) scale 

1. LUMINAIRE 2. HOOD 3. OPTICS 4. BALLAST/DRIVER 5. DECORATIVE SCREEN 6. OPTIONS 7. COLOR 8. MOUNTING 

PKWM ANG T3 60LED-WW DSOF – MAL PSA-TU 

14

ordering information 

1. LUMINAIRE 

PKWM Parkway Square Medium 

W: 23"-29.75" H: 30.5" 

WT: 49-79 lbs 

EPA: 3.18-3.28 

2. HOOD (Please see page 12 for hoods) 3. OPTICS 

Horizontal LED System 


Available with ANG only 


T2 IES Type 2 distribution 





Ordering information 

Vertical LED System 

Lightly diffused acrylic cylinder 

VL3 Asymmetric distribution 

VL5 Symmetric distribution 

4. BALLAST/Driver 

55LED-BW 42 light emitting diode array. Bright white (5100K). Class 2, 120 

thru 277 volt. Lightly diffused lens. VL3 & VL5 only. 

60LED-WW MicroEmitter 60 light emitting diode array. Warm white (3500K). 

Class 1, 120 thru 277 volt. Horizontal LED only. 

60LED-BW MicroEmitter 60 light emitting diode array. Bright white (5100K). 

Class 1, 120 thru 277 volt. Horizontal LED only. 

5. decorative SCREENS (optional) 

Painted to match fixture. Also available in stainless steel or copper. Not 

available with horizontal LED system. *Contact factory for custom designs. 

6. OPTIONS 

General 

ULS Upper lens shield above the hood. Reduces light above hood. 

LDL Lightly diffused lens. 60 LED only. 

TEN 2 3/8" O.D. x 4" long tenon. Required for all poles, except for PS4. 

TA23 Tenon adaptor slips over a 2-3/8" O.D. x 4" long tenon. Required for poles by others 

or used in conjunction with the TEN pole option by AAL. 

hood 

COP Brushed copper hood 

STS Stainless steel hood 


SSP Screen in brushed stainless steel 

CPR Screen in brushed copper 

DSIN DSOF DSWH DSTR DSSH DSCS 

Infinity Offset Wheat Trio Shutter Custom* 

7. COLOR 

All 13 standard and 4 premium AAL colors available. For 

RAL, please submit a 4-digit RAL number or color chip 

for custom colors. 

8. MOUNTING 

Please see page 17 for arm mounting options. 

SPECIFICATIONS 

HOUSING 

Parkway Square housings shall be cast aluminum a356 alloy, free of any porosity, 

foreign materials, or cosmetic fillers. The driver shall be mounted internally and 

accessed by loosening four captive bolts and lifting away the lamp compartment. The 

lamp compartment shall be sealed with a molded silicone gasket. All lenses shall be 

molded, seamless high impact lighting grade acrylic. The lens shall be sealed to the 

housing with a molded silicone gasket on the top and bottom. The vertical struts shall 

be cast aluminum and painted to match the fixture. All internal and external hardware 

shall be stainless steel. The fixture shall slip over a 4"/100mm square post top and 

secured with four stainless steel set screws. The hood shall be formed from 5052 

h32 aluminum, 304 stainless steel or 110 copper. The underside of the hood shall be 

finished in a high reflectance white powder coating. Copper hoods shall be unfinished 

to develop a patina. 

The horizontal optical system door shall be cast aluminum painted to match the 

fixture. The internal horizontal optical system shall be sealed from the outer housing 

with a silicone gasket. The tempered glass lens shall be sealed to the housing with 

a silicone gasket. A pair of stainless steel latches shall release the door to allow 

access to the optical system. The horizontal optical system shall be rotatable on 90° 

centers for orienting the light distribution. The horizontal optical system shall meet 

ansi ies standards for full cutoff reflector systems when using arm in the bu or bd 

configuration. 

Electrical 

The driver shall be integral to the fixture, mounted on a prewired module with a 

quick disconnect plug, and shall be removable by loosening four screws. The driver 

shall accept 120 thru 277 volts input, with output drive current of 350ma. Standard 

color temperatures for leds shall be 3500k and 5100k. Rated luminous efficacy of 

luminaire shall be >40 lm/w, with rated light output of >2960 for 5100k led. 

The vertical led configuration shall have a self contained light engine consisting of a 

diode array mounted to a die-cast aluminum heat sink and sealed behind an injection 

molded and optically clear lens. 

microemitter TM REFLECTOR 

Precision injection molded, high specular reflectors shall be positioned to achieve 

directional control toward desired task. Secondary reflectors shall have a concave, 

specular medium hammertone finish that shall be used to redirect light downward. 

No fasteners shall be placed on the reflective surface. The entire assembly shall 

fasten to the housing as a one-piece module and shall feature wiring quick-connects 

for easy installation. MicroEmitters shall be field replaceable and shall be driven at 

350ma current. 

Installation & mounting 

The pkwm shall be factory supplied as a complete, prewired assembly. The 

fixture shall slip over a 4"/100mm open top square pole or 2 3/8" tenon and secured 

and leveled with 4 stainless steel set screws or arm mounted to the side 4"/100mm 

round or square pole. 

FINISH 

Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer 

sealer, oven dry off, and top coated with a thermoset super tgic polyester powder 

coat finish. The finish shall meet the aama 605.2 performance specification which 

includes passing a 3000 hour salt spray test for corrosion resistance. 

Certification 

The fixture is listed with ETL or outdoor, wet location use and shall conform to 

ul1598 and Canadian csa std. C22.2 No.9. Ip65 rated for horizontal configurations 

and ip66 rated for vertical configurations. 

Warranty 

Fixture is warranted for five years. Any unauthorized return, repair, replacement or 

modification of the product(s) shall void this warranty. This warranty applies only to 

the use of the product(s) as intended by aal and does not cover any misapplication 

or misuse of said product(s), or installation in hazardous or corrosive environments. 

Contact aal for complete warranty language, exceptions, and limitations. 


Accent Scale LED 

Small Housing 

HOOD 


CodeLink SM 


Scan code 

to download 

PKWS Spec 

Sheet 


ORDERING example – accent (small) scale 

1. LUMINAIRE 2. HOOD 3. OPTICS 4. BALLAST/DRIVER 5. DECORATIVE SCREEN 6. OPTIONS 7. COLOR 8. MOUNTING 

PKWS DBL GLA 18LED-WW DSOF – MAL PSA-TU 

16



1. LUMINAIRE 

PKWS Parkway Square Small 

W: 14"-21" H: 21.75"-23" 

WT: 34-46 lbs 

EPA: 1.46-1.68 

2. HOOD (Please see page 14 for hoods) 3. OPTICS 




Available with ANG only 





Vertical Optical System 

GLA 

Frosted Glass Diffuser 


9LED-WW 9 light emitting diode array. Warm white (3500K). Class 2, 120 

thru 277 volt. GLA only. 








thru 277 volt. Horizontal LED only. 








6. OPTIONS 

General 


LDL Lightly diffused lens 

TEN 2 3/8" O.D. x 4" long tenon. Required for all poles, except for PS4. 

TA23 Tenon adaptor slips over a 2-3/8" O.D. x 4" long tenon. Required for poles by others 

or used in conjunction with the TEN pole option by AAL. 

hood 


COP Brushed copper hood 


STS Stainless steel hood 


7. COLOR 




8. MOUNTING 

Please see page 17 for arm mounting options. 


HOUSING 

Parkway square housings shall be cast aluminum a356 alloy, free of any porosity, 

foreign materials, or cosmetic fillers. The driver shall be mounted internally and 

accessed by loosening four captive bolts and lifting away the lamp compartment. The 

lamp compartment shall be sealed with a molded silicone gasket. All lenses shall be 


housing with a molded silicone gasket on the top and bottom. The gla element shall 

be frosted borosilicate glass. The vertical struts shall be cast aluminum and painted to 

match the fixture. All internal and external hardware shall be stainless steel. The fixture 

shall slip over a 3"/76mm square post top and secured with four stainless steel set 

screws. The hood shall be formed from 5052 h32 aluminum, 304 stainless steel or 110 

copper. The underside of the hood shall be finished in a high reflectance white powder 

coating. Copper hoods shall be unfinished to develop a patina. 

The horizontal optical system door shall be cast aluminum painted to match the fixture. 

The internal horizontal optical system shall be sealed from the outer housing with a 

silicone gasket. The tempered glass lens shall be sealed to the housing with a silicone 

gasket. A pair of stainless steel latches shall release the door to allow access to the 

optical compartment. The horizontal optical system shall be rotatable on 90° centers 

for orienting the light distribution. The horizontal optical system shall meet ansi ies 

standards for full cutoff reflector systems when using arm in the bu or bd configuration. 

Electrical 

The driver shall be integral to the fixture, mounted on a prewired module with a quick 

disconnect plug, and shall be removable by loosening four screws. The driver shall 

accept 120 thru 277 volts input, with output drive current of 350ma. Standard color 

temperatures for leds shall be 3500k and 5100k. Rated luminous efficacy of luminaire 

shall be >40 lm/w, with rated light output of >1600 for 5100k led. 

Installation & mounting 

The pkws shall be factory supplied as a complete, prewired assembly. The fixture shall slip 

over a 3"/76mm open top square pole and secured and leveled with 4 stainless steel set 

screws or arm mounted to the side 4"/100mm round or square pole. 

FINISH 

Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, 

oven dry off, and top coated with a thermoset super tgic polyester powder coat finish. The 

finish shall meet the aama 605.2 performance specification which includes passing a 3000 

hour salt spray test for corrosion resistance. 

Certification 

The fixture is listed with etl for outdoor, wet location use and shall conform to ul1598 and 

Canadian csa std. C22.2 No.9. Ip65 rated for horizontal configurations and ip66 rated for 

vertical configurations. 

Warranty 


modification of the product(s) shall void this warranty. This warranty applies only to the 

use of the product(s) as intended by aal and does not cover any misapplication or misuse 

of said product(s), or installation in hazardous or corrosive environments. Contact aal for 

complete warranty language, exceptions, and limitations. 


Designer Mounting 

Options 

Unique 

Arm Design 

The unique design of Parkway Square’s arms provide a 

multitude of configurations allowing the same arm and 

luminaire to be used throughout the site, providing a 

consistent and complimentary look and feel. 

The versatile design of the 

Parkway Square family 

allows for a multitude of mounting options, including 

post top, arm and wall mount. 

Parkway Square mounts to a 4" square pole for 

pedestrian scale, or a 3" square pole for accent scale. AAL 

offers a wide variety of decorative poles to complement the 

elegant design of Parkway Square and carry the styling 

throughout the entire project. 

18

ARM MOUNTING 

Pole MOUNT 

Arm mounts to side of a 4" O.D. pole. 

PSA-TU 

Fixture above with arm 

mounted up. 

PSA-BU 

PSA-TD 


mounted down. 

PSA-BD 

Parkway Square is 

a designer’s dream, 

offering endless 

configurations and true 

customization without the 

custom price. 

Available as a post or 

wall mount, Parkway 

Square can be mounted 

above or below its 

decorative arms, and the 

arms themselves can be 

rotated to have the arm in 

the up or down position. 

Fixture below with 

arm mounted up. Not 

available with IND. 

Fixture below with arm 

mounted down. Not 


Parkway Square arms 

feature unitized, onepiece 

designs for 

structural rigidity and 

easy installation. 

wall MOUNT 

Mounting plate provided. Hardware by others. 

PSWM-TU 


mounted up. 

PSWM-TD 


mounted down. 

AAL offers a wide 

variety of poles to install 

Parkway Square as a 

post top luminaire. The 

pedestrian scale mounts 

to a 4" O.D. open top 

square pole or to a 2 3/8" 

tenon. Visit www.aal.net 

for a complete listing of 

poles. 


PSWM-BU 

PSWM-BD 

Fixture below with 

arm mounted up. Not 


Fixture below with arm 

mounted down. Not 


AAL Arms Spec Sheet 

Parkway Square 19

Sconce LED 

CodeLink SM 

Scan code 

to download 

PKSA/PKSP 

Spec Sheet 

ORDERING example – Sconce 

1. LUMINAIRE 2. BALLAST/DRIVER 3. DECORATIVE SCREEN 4. OPTIONS 5 COLOR 

PKSA DBUS 15LED-WW DSTR NEG BLK 

20



1. LUMINAIRE 

Accent Scale (Small Sconce) 

PKSA DB Down beam & egress 

PKSA DS Down spread & egress 

PKSA UB Up beam & egress 

PKSA US Up spread & egress 

PKSA DBUS Down beam/up spread & egress 

PKSA UBDS Up beam/down spread & egress 

PKSA USDS Up spread/down spread & egress 

Pedestrian Scale (Medium Sconce) 

PKSP DB Down beam & egress 

PKSP DS Down spread & egress 

PKSP UB Up beam & egress 

PKSP US Up spread & egress 

PKSP DBUS Down beam/up spread & egress 

PKSP UBDS Up beam/down spread & egress 

PKSP USDS Up spread/down spread & egress 



thru 277 volt. For PKSA DB/DS/UB/US only. 


thru 277 volt. For PKSA DB/DS/UB/US only. 


thru 277 volt. For PKSP DB/DS/UB/US only. 


thru 277 volt. For PKSP DB/DS/UB/US only. 


thru 277 volt. For PKSA DBUS/UBDS/USDS only. 


thru 277 volt. For PKSA DBUS/UBDS/USDS only. 


thru 277 volt. For PKSP DBUS/UBDS/USDS only. 


thru 277 volt. For PKSP DBUS/UBDS/USDS only. 


Painted to match fixture. Also available in stainless steel or copper. 

*Contact factory for custom designs. 



4. OPTIONS 

General 

BBU Integral battery backup. 24PLL for PKSA only. 

NEG No egress lamp. Opening is sealed with a cap and painted to match fixture. 


CPR Screen in copper material 


HOUSING 

Parkway Square housings shall be cast aluminum, a356 alloy, free of any porosity, 

foreign materials, or cosmetic fillers. The vertical lens shall be opal, semi translucent 

high impact injection molded lighting grade acrylic and shall not be field replaceable. 

The vertical struts shall be cast aluminum and painted to match the fixture. The lens 

shall be sealed to the housing with a molded silicone gasket on the top and bottom. 

The optical lens frame shall be secured with four captive socket cap screws and 

shall be sealed with a one piece memory retentive, molded silicone gasket. The lamp 

compartment shall have a molded silicone plug to completely seal the optical system 

from insects or dirt emanating from the electrical box or conduit. Four stainless steel 

screws shall release the canopy to allow electrical access. All internal and external 

hardware shall be stainless steel and zinc. 

Electrical 


disconnect plug, and shall be removable by loosening four screws. The driver shall 

accept 120 thru 277 volts input, with output drive current of 350ma. Standard color 

temperatures for leds shall be 3500k and 5100k. Rated luminous efficacy of luminaire 

shall be >40 lm/w, with rated light output of >1600 for 5100k leD. 

The mr16 lamp for emergency egress feature shall be included and powered by 

120 volt input transformed into low-voltage (12 volt) by the electronic transformer 

(included). The mr16 lamp shall use a miniature bi-pin base. 

5. COLOR 

All 13 standard and 4 premium AAL colors available. For RAL, please submit a 4-digit RAL 

number or color chip for custom colors. 

WALL PLATE 

Wall plate shall be secured into wall over j-Box and shall be wired to the power circuit. 

Fixture shall be attached to the wall plate by four set-screws. 

FINISH 





Certification 




Warranty 






SAFETY 

The fixture shall include an integral secondary source to provide path of egress 

illumination from building to the public way. The hidden mr16 lamp, powered as a 

remote head is able to be angle up to 15° in either direction. 


Bollard LED 

CodeLink SM 

Scan code 

to download 

PKWB Spec 

Sheet 

ORDERING example – Bollard 

1. LUMINAIRE 2. HOOD 3. OPTICS 4. BALLAST/DRIVER 5. DECORATIVE SCREEN 6. OPTIONS 7. COLOR 

PKWB ANG GLA 12LED-WW DSOF – MAL 

22



1. LUMINAIRE 

PKWB Parkway Square Bollard 

W: 14" H: 42" 

WT: 42 lbs 

EPA: 2.84 

2. OPTICS 





Vertical Optical System 

GLA 

Frosted Glass Diffuser 



















5. OPTIONS 

General 


LDL Lightly diffused lens 

6. COLOR 




hood 

COP 

STS 

Brushed copper hood 

Stainless steel hood 





HOUSING 

Parkway Square housings shall be cast aluminum, a356 alloy, free of any porosity, 

foreign materials, or cosmetic fillers. The shaft shall be 5" wide and 22" tall, extruded 

6061-t6 aluminum yielding a fixture height of 42 inches. The driver shall be mounted 

internally and accessed by loosening four set screws and lifting the fixture head off 

of the shaft and loosening an additional four bolts on the underside of the fixture 

head. One stainless steel screw shall release the top cap to allow access to the lamp 

compartment and shall be sealed with a molded silicone gasket. All lenses shall be 


housing with a molded silicone gasket on the top and bottom. The gla element shall 

be frosted borosilicate glass. The vertical struts shall be cast aluminum and painted 

to match the fixture. All internal and external hardware shall be stainless steel. The 

hood shall be formed from 5052 h32 aluminum, 304 stainless steel or 110 copper. 

The underside of the hood shall be finished in a high reflectance white powder coating. 

Copper hoods shall be unfinished to develop a patina. The fixture features tamper 

resistant hardware. 

The horizontal optical system door shall be cast aluminum painted to match the 

fixture. The internal horizontal optical system is sealed from the outer housing with a 

silicone gasket. The tempered glass lens shall be sealed to the housing with a silicone 

gasket. A pair of stainless steel screws shall release the door to allow access to the 

optical compartment. The optical assembly shall be removed by loosening four screws 

and lifting it out. The horizontal optical system shall be rotatable on 90° centers for 

orienting the light distribution. 

Electrical 


disconnect plug, and shall be removable by loosening four screws. The driver shall accept 

120 thru 277 volts input, with output drive current of 350ma. Standard color temperatures 

for leds shall be 3500k and 5100k. Rated luminous efficacy of luminaire shall be >40 

lm/w, with rated light output of >1600 for 5100k led. 

FINISH 





Certification 




Warranty 







® 

A R C H I T E C T U R A L A R E A L I G H T I N G 

Parkway Square brochure with 

additional lighting options 

Parkway Square is a registered trademark of Architectural Area Lighting and Hubbell Lighting, Inc. 

©2012 Architectural Area Lighting | PWS 0312 

16555 East Gale Ave. | City of Industry | CA 91745 

T 626.968.5666 | F 626.369.2695 | www.aal.net | www.aal.net/aal/pws.html | Printed on recycled paper

ARCHITECTURAL AREA LIGHTING

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?