P-Bus Gateway Firmware PBGW2.128 Version 1.61

P-Bus
Modulelist (2)
To expand all modules at once simply click ‘expand all’:
The value / status of each I/O-channel is displayed depending on the module type
as measurement, command, input or control-output followed by the standard unit.
The LG Ni-1000 modules PTM1.*R1K are displayed as -50 .. 150 °C
n.c. = not connected
M = manual control
short-circuit = input is short-circuited
By clicking on ‘collapse all’ all I/O-modules are collapsed to their initial state.
By default, the I/O-modules being displayed are those which are actually on the P-
Bus (‘hide empty modules’). To show all I/O-addresses (also the unused
addresses) click ‘show empty modules’.
In order to switch the display to P-Bus 2 navigate by clicking on P-Bus 2 in the
navigation bar:
10/17
Persy Control Services B.V.
Netherlands
PBGW2.128 – P-bus Gateway
PCS0113en
02.2009