Please note: Roughing and finishing geometries are available with a variety of length, flute angles, number of teeth. Material specific cutters are also available including: Hardened Steel, Titanium, The "Vantage" Inconel, and VE4 Trochoidal Solid Milling Solutions. Carbide End Mill Series Please note: Roughing and finishing geometries are available with a variety of length, flute angles, number of teeth. Material specific cutters are also available including: Hardened Steel, Titanium, Inconel, and Trochoidal Milling Solutions. The "Ad-Vantage" AD4 Solid Carbide End Mill Series The “Vantage” VE4 Solid Carbide End Mill Series Universal Economy End Mill VE4 Solid Carbide Endmill Range 4.0-20.0mm Design Features: Cutter Diameter: 4mm-20mm Universal Economy Coated Endmill,30 Helix Angle Number of Flutes: Z=4 2 Teeth Centre Cutting Suitable Helix Angle: for High 30° Strength Materials,Aluminium and non Ferrous Coating: ED1 Can VE4 Shank: also Solid be Plainused Carbide on Endmill stainless Range and 4.0-20.0mm Exotic materials The "Vantage" VE4 Solid Carbide End Mill Series The Universal Application: all-round Economy cost effective Coated tooling Endmill,30 solution Helix Angle Suitable for High Strength Materials, Aluminium, and Suitable Non Ferrous. for High Strength Materials,Aluminium and non Ferrous Can also be used on Stainless and Exotic materials. Can The all-round also be cost used effective on stainless Tooling solution. and Exotic materials The all-round cost effective tooling solution l1 d2 h6 d2 h6 l2 l1 l2 d1 h10 Cx45 d1 h10 Cx45 The "Ad-Vantage" AD4 Solid Carbide End Mill Series The “Ad-Vantage” AD4 Solid Carbide End Mill Series Universal High Performace End Mill AD4 Solid Carbide Endmill Range 4.0-20.0mm Design Features: Cutter Universal Diameter: High 4mm-20mm Performace Coated 4 flute Endmill,Centre Cutting Number of Flutes: Z=4 2 Teeth Centre Cutting Variable AD4 Solid Helix Helix Carbide Angle: Angles 36° Endmill / 38° 36 Range / 38 , Unequal 4.0-20.0mm Flute Deviation Coating: ED2 Universal Suitable for High Steels,stainless Performace Coated Steel,Cast 4 flute Iron Endmill,Centre Cutting Shank: Plain Special Variable Geometry: Chrome Helix & Nickle Angles Unequal Flute Materials 36 / Deviation 38 , Unequal Flute Deviation Application: Suitable for Steels,stainless Steel,Cast Iron The all-round High Performance tooling solution Suitable for Steels, Stainless Steel, Cast Chrome Iron, Chrome & Nickle & Nickel Materials Materials. The Universal High Performance Tooling solution The all-round High Performance tooling solution d2 h6 d2 h6 l2 l1 l2 l1 d1 h10 Cx45 d1 h10 Cx45 4 www.edv-ltd.com Email: sales@edv-ltd.com Contact details details Tel:+44(0)114 2421144 Email:sales@edv-ltd.com Contact details Tel:+44(0)114 Contact details 2421144 Tel:+44(0)114 2421144 www.edv-ltd.com Email:sales@edv-ltd.com Email:sales@edv-ltd.com 5