25.02.2016 Views

Photonics21 Annual Report_C2

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

HAMLET, funding: €3.487.401,25, RIA, coordinator: INSTITUTE OF COMMUNICATION AND COMPUTER<br />

SYSTEMS (EL). The project proposes to develop a photonic integration platform for microwave photonic<br />

applications.<br />

OCTCHIP, funding: €3.997.450,00, RIA, coordinator: MEDIZINISCHE UNIVERSITAET WIEN (AT). The<br />

objective of the project is to demonstrate a compact (5 times smaller), low-cost (3 times cheaper) and<br />

higher performing (4 times faster) optical coherency tomography (OCT) system operating at 840 nm for<br />

widespread adoption in point-of-care for early diagnosis of eye diseases. OCTCHIP will integrate most of<br />

the optics and electronics on a silicon nitride waveguide based photonic integrated circuit.<br />

PICS4ALL, funding: €1.051.895,00, CSA, coordinator: TECHNISCHE UNIVERSITEIT EINDHOVEN (NL). The<br />

project will establish a network of eight Application Support Centres for PIC technology, with wide<br />

European coverage. This will build on the access services for InP and TriPleX based PICs (design<br />

framework, fabrication, packaging) provided by the existing JePPIX Support Centre in Eindhoven.<br />

PLASMOFAB, funding: €4.150.246,25, RIA, coordinator: ARISTOTELIO PANEPISTIMIO THESSALONIKIS<br />

(EL). The proposal aims to develop a novel photonics integrated circuit platform, CMOS compatible,<br />

integrating plasmonic and electronic components, overcoming the existing dimensional mismatch<br />

between electronic and optical circuits.<br />

WIPE, funding: €3.766.097,50, RIA, coordinator: TECHNISCHE UNIVERSITEIT EINDHOVEN (NL).The main<br />

aim of the project is the development of a technology that combines mature InP integrated photonics<br />

with industrial Silicon electronics. The co-integration is done at the 3" wafer level, by bonding the InPwafers<br />

on BiCMOS wafers, and should enable cost effective volume manufacturing.<br />

Design and manufacturing of components and systems - Projects funded under call ICT-28b-2015<br />

PIX4LIFE, funding: €8.557.337,88, IA, coordinator: INTERUNIVERSITAIR MICRO-ELECTRONICACENTRUM<br />

IMEC VZW (BE). The proposal is focused on PIC device fabrication for life science applications in the<br />

visible range. It is aligned with the Call topic ICT-28b and addresses sub-topic: Pilot line for PIC fabrication<br />

on III-V and/or dielectric based platforms.<br />

Photonics research, education and training - Projects funded under call ICT-28c-2015<br />

RESPICESME, funding: €1.109.047,50, CSA coordinator: STEINBEIS INNOVATION GGMBH (DE). The<br />

project aims to enhance the innovation potential of European photonic SMEs, clusters and national<br />

platforms by encouraging collaborations in and beyond photonics.<br />

Progress of running Photonics PPP CSA projects<br />

Photonics4All App<br />

The Photonics4All project developed an app to explain the role of photonics technology in our life. The<br />

role of the Photonics4all App is to promote photonics to young people, the general public and<br />

entrepreneurs. The Photonics4All-App contains five different modules:<br />

4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!