Smart Kit catalogue (En)

CONVERTERS - CHARGERS
1027
Ni-Cad BATTERY CHARGER
Using this circuit you can easily charge any Ni-Cad
battery from 50 to 400 mA charging current.You can
easily charge more than one battery at a time.The
charging current can be selected according to the
battery you are going to charge. It is absolutely safe for
your expensive rechargeable batteries. Charging
current: 50-400 mA (selectable).
V
P.S.
T
PCB
CE
12-24VAC
2x12VAC/0,5A
56x128mm
1065
INVERTER 12VDC - 220VAC 50 Hz
A useful project for those who like camping and
caravaning but they don’t like leaving modern facilities
behind. It can supply loads of up to 100 Watts.The kit
includes the heatsinks for the power transistors.
The output frequency is 50Hz.
V
P.S.
T
PCB
CE
12VDC
2x10VAC/20A
48x72mm
1069
12VDC FLUORESCENCE
This circuit is useful for the outdoors and camping. It is
powered from a car battery and can light any
fluorescent lamp in 8-40 watt size.The special design of
the circuit ensures the maximum illumination without
causing any spikes in the mains. Dissipation Current:
1.3A(max) Frequency: 58KHz.
V
P.S.
T
PCB
12-14VDC
46x162mm
1085
DC CONVERTER 12 TO 6/7.5/9V
With this circuit you will be able to use any small
radio, cassette recorder,WALKMAN etc. in your car
without having to use batteries, because its operating
voltage is lower than 12VDC. It can also be used as a
power supply with 3 different, selectable, output
voltages with a single 12V transformer. Output current:
800mA. Output voltage: 6, 7.5, 9VDC.
V
P.S.
T
PCB
12VDC
CE
40x85mm
Internet site: http://www.smartkit.gr 43