Fisher Scientific Focus Products 2011

Private Label 

Top Products

Table of Contents 

General Laboratory .................................................................................................................................................................................1 

General Supplies .....................................................................................................................................................................................12 

Glassware ........................................................................................................................................................................................................18 

Plastic ..................................................................................................................................................................................................................21 

See More BLUE 

Choose Fisher Scientific for quality, 

reliability, value and convenience! 

Fisher Scientific always has, and always will, 

look for new ways for you to easily find 

the products you need. 

See more BLUE in your lab with 

FISHERBRAND and FISHER SCIENTIFIC! 

*Trademark. For ownership, see www.fishersci.com/trademarks.

General laboratory 

Fisher Scientific* Isotemp* Stirring Hotplates 

Designed for general-purpose lab heating and stirring 

Basic Models 

• “Favorites” feature allows users 

• Easy to set analogue temperature control knob with graduated scale 

• 4 × 4” and 7 × 7” models heat to 540°C (1004°F); 10 × 10” models heat to 

400°C (752°F) 

• Reflective white ceramic surface is acid- and alkali-resistant and easy to clean 

to store three commonly used 

settings 

• Separate LED displays for 

temperature and speed (actual or 

setpoint) 

• Nonheating frame surrounds the heated ceramic plate for added protection 

— LED display 

• Direct-drive motor/magnet system 

runs silently 

• Top plate and base design diverts liquids away from internal electronics • Top plate and base are molded to 

• Safety warning system with visual alert protects user from accidental burns divert liquids away from internal 

• Redundant temperature control systems for overtemperature protection 

electronics 

• Incorporated base mount holds support rods up to 13mm diameter — ideal 

when using thermometers or pH probes 

• INSTANT-ON feature begins stirring at low 60rpm to prevent splashing 

• Safety warning system protects 

users from accidental burns; red 

warning light alerts when heating surface exceeds 50°C and flashes when 

heat is shut off until surface is cool 

• Direct-drive motor/magnet system runs silently 

• Incorporated base mount holds support rods up to 13mm diameter — ideal 

• Comes with detachable line cord and PTFE stir bar 

when using thermometers or pH probes 

Digital Model 

• INSTANT-ON feature begins stirring at low 60rpm to prevent splashing 

• Compact design with aluminium top plate 

• Heats to 380°C (716°F) 

• Comes with detachable line cord and PTFE stir bar, 6” (18cm) PTFE-coated 

stainless-steel temperature probe, 18”L (46cm) support rod and clamp 

• 49 sq. in. heating surface will not crack or chip 

COMPLIANCE: 

• LED displays actual and setpoint readings 

IEC 1010 

• Temperature is adjustable in 1°C increments, 0.1°C for temperatures below 

100°C with remote temperature probe 

• User-programmable timer automatically shuts off unit — perfect for timed 

experiments 

CERTIFICATIONS: 

CSA, CUS 

Model Top Plate Size Top Plate Material Temperature Range Stirring Range Cat. No. 

Basic 4 x 4” Ceramic Ambient to 1004°F (30° to 540°C) 60 to 1200rpm 11-100-16SH 



Fisher Scientific* General-Purpose Undercounter Refrigerator 

5.6 cu. ft. (159L) of convenient 

undercounter storage 

• Temperature range: 2° to 7°C (36° 

to 45°F) 

• CFC-free (R134A) refrigerant 

• Manual defrost 

• 240w compressor 

• Static condenser free of electric 

fans 

• Key-locked door with flat door 

liner, mounted to open from left 

• Seamless, easy-to-clean interior, 

vacuum-formed from refrigerationgrade 

plastic 

• Exterior baked-on acrylic enamel 

• Exterior dimensions: 24.5L × 23.5W × 33”H (62 × 60 × 84cm) † (add 0.5” (1.3cm) 

to total height when using the leveling legs supplied with unit) 

• Interior dimensions: 13D × 19W × 27.5”H (33 × 48 × 70cm) 

• Net weight, 90 lb. (40.8kg) 

• Shipping weight, 120 lb. (54.5kg) 

• For 120V 60Hz, 2A; 15A breaker; includes power cord with plug 

Model Cat. No. 

Undercounter Refrigerator 97-920-1 

Fisher Scientific* Minicentrifuge 

Economical personal 

benchtop centrifuge for 

budget-conscious labs 

For quick spindowns from walls 

or caps of centrifuge tubes, 

microfiltration of HPLC samples 

and cell separations, and shortterm 

coldroom use. 

• Capacity: 12mL (6 × 2.0mL) 

• Maximum speed: 6600rpm with 

microtube rotor 

• Maximum RCF: 2200xG with PCR strip rotor 

• Small footprint 

• ON/OFF switch delivers immediate acceleration and deceleration 

• Clear polycarbonate lid allows maximum visibility 

• Off-white base with nonskid rubber feet 

• Supplied with circular fixed-angle rotor that spins 6 × 1.5/2.0mL tubes (also 

includes six 05-090-103 adapters to spin 0.5mL tubes), strip rotor that accepts 

two 8 × 0.2mL thermal cycler tube strips or 16 individual 0.2mL tubes and 

power cord 

Electrical Requirements Cat. No. 

115/240V 50/60Hz 05-090-100 

Phone: 1.800. 234.7437 Fax: 1.800.463.2996 www.fishersci.ca one source. infinite solutions. ® 

1

Fisher Scientific* Isotemp* General-Purpose 

Refrigerator/Freezer 

Ideal for storing nonvolatile reagents, 

samples and specimens 

• Temperature range from 2° to 13°C (refrigerator), -18° 

to -10°C (freezer) 

• Total capacity: 17.9 cu. ft. (507L) 

• Refrigerator capacity: 12.9 cu. ft. (365L) 

• Freezer capacity: 5.0 cu. ft. (142L) 

• User-switchable to manual or automatic defrost 

• Controls at front of refrigerator for easy access 

• Separate adjustment of refrigerator and freezer 

temperatures 

• CFC-free R134-A refrigerant 

• Yellow warning label reads: “Laboratory Refrigerator” 

• Foamed polyurethane insulation ensures temperature uniformity 

• Textured white enamel steel exterior resists marking 

• Refrigerator has two white vinyl-coated–steel slide-out adjustable shelves, 

two tinted slide-out bottom drawers, four door shelves 

• Freezer has one compartment and two door shelves 

• Two adjustable, two fixed rollers on bottom for easy installation and leveling 

• Exterior dimensions, 30.75L × 30W × 66”H (78 × 76 × 168cm) 

• Requires air clearance of 3” (7.6cm) around top, back and sides 

• Shipping weight, 240 lb. (109kg) 

• For 115V, 60Hz; has NEMA 5-15 plug, requires NEMA-15 receptacle. 


cUL listed. 

Description Cat. No. 

Refrigerator/Freezer 13-986-106A 

Fisher Scientific* accumet* AB15 Basic pH/mV/°C Meter 

Simple, menu-guided operation in an affordable pH/mV meter 

Easy operation, accuracy and affordability 

• Large LCD guides user with plain-language prompts and 

error messages 

• Display indicators keep you apprised of menu choice, 

measuring units, buffers standardized (in pH mode) and 

temperature 

• No cryptic icons to learn: prompts and status/error 

messages are displayed in plain language 

• Store up to 50 datapoints in nonvolatile memory 

• Powerful pH mode offers selectable resolution to 

0.01pH; range -1.99 to +19.99pH with relative accuracy 

of ±0.01pH 

• mV mode: Range of 0 to ±1800mV (abs. or rel.) with 

0.1mV resolution and ±0.2mV relative accuracy 

Fisher Scientific* Isotemp* Digital-Control Water Baths 

Ideal for industrial, clinical, 

pharmaceutical or biomedical 

procedures 

Microprocessor PID Control 

• ±0.24°C uniformity, ±0.5°C 

accuracy and stability at 37°C 

• Display shows °C or °F; easy to 

read from across the room 

Safety Features 

• Low profile and front-panel controls for easier access, safer operation 

• Dual thermostats guard against thermal runaway 

• Hinged acrylic or stainless-steel gable covers have fins that keep hands away 

from hot vapours 

• Covers stay open at 90° or, with quick-release hinge, lift off completely for use 

with large glassware 

• Heating elements will not burn out if bath accidentally runs dry 

Construction 

• Corrosion-resistant exterior with tough, easy-to-clean acrylic enamel coating 

• Temperature-resistant plastic rim insulates, resists leaks, keeps its shape and 

won’t dry out or crack like caulked seals 

• Exterior stays cool even after hours of operation 

• Deep-drawn, stainless-steel reservoirs and perforated sample trays prevent 

leaks, guard against rust and contamination 

• Rounded reservoir corners and sample trays with finger holes allow for easy 

removal, make cleaning easier 

• With acrylic cover 


CSA approved. 

Model 205 210 220 

Capacity 1.38 gal. (5L) 2.62 gal. (10L) 5.25 gal. (20L) 

Reservoir 5.88 x 11.75 x 6” 12.88 x 11.75 x 6” 11.75” x 19.75 x 6” 

L x W x D (14.8 x 30 x 15cm) (33 x 30 x 15cm) (30 x 50 x 15cm) 

Overall 10.5 14.12 x 6.25” 16.38 x 15.38 x 8.88” 16.38 x 24.38 x 8.88” 

L x W x H (27 x 36 x 19cm) (42 x 39 x 23cm) (42 x 62 x 23cm) 

Shipping 

weight 

9.88 lb. (4.5kg) 16.5 lb. (7.5kg) 22.25 lb. (10.1kg) 

Electrical 

Reqts. 

120V/60Hz 120V/60Hz 120V/60Hz 

Cat. No. 15-462-5Q 15-462-10Q 15-462-20Q 

• Temperature mode: Range of -5.0° to +105.0°C (23° 

to 221°F) with 0.1°C resolution and ±0.5°C relative 

accuracy 

• Automatic recognition of 15 buffers and five-point 

calibration 

• BNC and reference pin electrode inputs, ATC probe 

input, and input for accuFet* electrode 

• Dimensions: 7.5L × 5.5W × 3.25”H (19 × 14 × 8cm) 

• Net weight: 1.875 lb. (0.8kg) 

• Includes power supply, electrode support (13-637-671), 

operation manual, accumet liquid-filled, glass body 

combination pH Ag/AgCl Electrode (13-620-285) and 

separate ATC probe (13-620-19) 

Package Electrodes Cat. No. 

Meter Kit/pH accumet Ag/AgCl pH Combination Electrode 13-620-285; 

ATC Probe 13-620-19 

13-636-AB15 

2 *Trademark. For ownership, see www.fishersci.com/trademarks.

Fisher Scientific* Isotemp* Basic Magnetic Stirrers 

Compact, low-profile stirrers 

with analogue control 

Operating Features 

• Variable speed control from 60 to 

1200rpm 

• Speed is set easily, even when 

wearing heavy gloves 

• Microprocessor controller maintains 

consistent stirring under changing 

viscosities 

• Large LED speed display 

• RESET key restores last settings 

• Base includes support rod mount with thumbscrew for rods up to 13mm dia. 

• Load capacity: 25 lb. (11kg) 

Safety Features 

• INSTANT ON begins stirring at a slow 50rpm to prevent splashing 

• White ceramic top plate models resist alkalis and acids, clean easily 

• Contoured housing diverts spills away from internal components 

• Includes detachable 3-wire line cord and plug, PTFE stir bar 

COMPLIANCE: 

IEC 1010 


cUL, CSA approved 

Top Plate Size 

Top Plate 

Material 

Electrical 

Requirements 

Cat. No. 

4.25 x 4.25” (10.8 x 10.8cm) Ceramic 120V 50/60Hz 11-100-16S 

7.25 x 7.25” (18.4 x 18.4cm) Ceramic 120V 50/60Hz 11-100-49S 

10.25 x 10.25” (26.0 x 26.0cm Ceramic 120V 50/60Hz 11-100-100S 

Fisher Scientific* Isotemp* Digital Dry Bath Incubator 

Provides controlled dry heat 

for a wide variety of clinical 

and general chemistry 

applications 

• Exceptional temperature control 

and uniformity 

• Temperature range of 5°C above 

ambient to 130°C 

• Powder-coated steel body 

construction provides durability for 

demanding applications 

• Compact design saves valuable bench space 

• Choice of interchangeable heating blocks 

• PID microprocessor control, digital temperature setting 

• Just press UP/DOWN arrows to set temperature in 0.1° increments 

• Effectively hold samples at constant, warm temperature 

• 5°C above ambient to 130°C range; ±0.4° uniformity at 37°C; stability, ±0.2°C 

• Bright LED display continuously shows actual temperature in °C 

• Temperature probe in bottom of bath provides improved accuracy and 

control; free probe included 

• Accepts two 2.91L × 3.75W × 2”H (7.4 × 9.5 × 5.1cm) blocks, sold separately 

• Includes temperature probe, line cord and plug 


CSA approved 

No. of 

Blocks 

Electrical 

Requirements 

2 120V 50/60Hz, 

1.25A, 150w 

Overall L x W x H Shipping 

Weight 

Cat. No. 

14.44L x 8.69W x 

3.31”H 

6 lb. (3kg) 11-715-125DQ 

Fisher Scientific* Vortex Mixers 

Durable, rugged vortexers 

offer exceptional versatility 

and value 

• Dimensions: 6.88L × 4.88W × 4.88”H 

(17.3 × 12.2 × 12.2cm) 

• Net weight: 11 lb. (5kg) 

• Supplied with cup head and 3” 

(7.6cm) rubber head with cover 

Analogue Mixer 

• Variable analogue speed control 

from 300 to 3000rpm (maximum 

speed will vary depending on 

accessory used) for gentle to 

vigorous mixing action 

• Continuous mode for use with accessory attachments 

• Touch mode activated when depressing the cup head 

• Three-way power switch 

• Supplied with cup head and 3” (7.6cm) head with cover 

Digital Mixer 

• Ideal for applications demanding repeatable results 

• Variable speed control from 500 to 3000rpm (maximum speed will vary 

depending on accessory used) 

• Touch keypad controls and LED display for speed and time 

• Microprocessor control maintains set speed for consistent mixing 

• Timer displays countup during continuous run; countdown during timed run 

• Continuous or touch modes 

• Three-way power switch 

• Supplied with cup head and 3” (7.6cm) head with cover 


cUL listed 

Model RPM Electrical Reqts. Cat. No. 

Analogue 0 to 3000 120V 50/60Hz, 150W 02-215-365 

Digital 300 to 3000 120V 50/60Hz, 150W 02-215-370 

Fisher Scientific* Isotemp* 500 Series Economy Lab Oven 

Ideal for small drying and sterilizing jobs 

Sturdy, reach-in gravity convection oven 

is well suited to bacteriological, clinical, 

educational and industrial labs on a tight 

budget. Light enough to move as needed. 

• Temperature range: Ambient +5° to 210°C 

• Capacity: 1.7 cu. ft. 

• Features front-mounted electronic temperature 

control, red heating cycle indicator, ON/OFF 

switch and green power indicator 

• Continuous temperature uniformity 

• Built-in backup controller for safety 

• Double-wall construction of heavy-gauge steel with 1” (2.5cm) layer of 

impregnated fibreglass 

• Aluminium chamber 

• Door opens 180°; cool-touch handle and positive dual spring-loaded latches 

• Three-shelf capacity 

• Includes thermometer holder, line cord with grounded plug; three shelves 

• Requires thermometer (13-246; order separately) 

Electrical Requirements Capacity Cat. No. 

120V 50/60Hz, 6.7A, 800w 1.7 cu. ft. 13-246-516GAQ 


3

FisherBiotech* Electrophoresis Power Supply 

Easy-to-use power supply is designed for safety 

• Choice of operating modes — constant voltage or 

constant current output modes with automatic crossover 

between modes; programmable models add a constant 

power mode 

• Automatic shutoff (at run’s end) saves time, energy and 

reduces errors 

• Automatic recovery (after power failure) eliminates need 

to restart the unit 

• Runs up to three gels at once at either constant current 

or constant voltage 

• Uses less surface area than a sheet of paper 

• Utilizes UP/DOWN arrow controls 

• Ideal for SDS-PAGE, DGGE/CDGE and DNA/RNA submarine 

electrophoresis 

• Backlit LED display, mode indicator lights, internal timer 

and multiple output jacks 

Type Maximum 

Voltage 

Maximum 

Current 

Maximum 

Power 

• Soft-touch keypad controls allow user to select modes 

and output levels, set timer and start/stop operation 

• Power-off memory retains settings after shutdown 

• Lightweight, stackable design allows use of multiple 

units while saving space on the benchtop 

• Locking kickstand permits positioning the unit at an 

angle for better viewing 

• Standard safety features include no-load and 

failure notification, arc and ground leak detection, 

overvoltage protection and jacks that are set away 

from controls 

• Nonskid rubber feet provide stability 

• For 120V 

COMPLIANCE: 

CSA approved 

No. of 

Jacks 

Modes Timer L x W x H Cat. No. 

Compact 300V 400mA 75w 3 Voltage or current 0-999 min. 10.25 x 5.5 x 5.25” (26 x 14 x 13.3cm) FB300Q 

Fisher Scientific* Isotemp* General-Purpose Freezer 

Equipped with manual defrost for sensitive biological sample storage 

• Adjustable temperature from -20° to -12°C, with ±3°C stability 

• Yellow warning label on door “Not For Flammable Material 

Storage” 

• CFC-free R404A refrigerant 

• Durable, textured white enamel-coated steel exterior 

• Foamed-in polyurethane insulation 

Model Capacity Interior D x W x H No. of Shelves Exterior L x W x H † Shipping Weight Cat. No. 

Basic 20 cu. ft. (566) 20 x 27 x 57” (51 x 67 x 145cm) 4 Fixed 36 x 32 x 73” (91 x 81 x 178cm) 200 lb. (90.7kg) 13-986-148 

Basic 5.0 cu. ft. (142L) 16 x 18 x 27 in. (41 x 46 x 69cm) 2 Fixed 26 x 21.5 x 33.75 in. (66 x 55 x 86cm) 90 lb. (41kg) 13-986-154 

Fisher Scientific* Isotemp* Undercounter 

Refrigerated Incubator 

6.1 cu. ft. capacity — holds 114 BOD bottles 

• Temperature range: -10° to +60°C (14° to 140°F); 

stability, ±0.2°C; uniformity, ±1°C 

• Door-mounted microprocessor controller, LED 

display with readout to 0.1°C 

• Chamber safety thermostat set at 62°C; alarm LED 

alerts to over/under temperature 

• Compressor overload relay, RTD temperature 

probe and protected set point mode 

• White plastic interior/white enamel steel exterior, 

foamed polyurethane insulation; door opening from left 

• 2A Convenience outlet inside chamber 

• Two bottom rollers for easy installation and leveling 

• Overall dimensions: 24.5L × 24W × 34.5”H (62.2 × 61 × 87.6cm) 

• Shipping weight, 126 lb. (57kg) 

• Includes two removable shelves, three molded door shelves, line cord and 

plug 


CSA approved 

Model Cat. No. 

115V 60Hz, 6A 97-990E 

• One solid hinged door opens to a 90° angle, closes with a 

gentle push 

• Four adjustable legs ensure cabinets are level on irregular 

floors 

• For 115V 60Hz; equipped with NEMA 5-15P line cord plug; 

requires NEMA 5-15R receptacle 

Fisher Scientific* General-Purpose Undercounter Freezer 

Convenient storage in small 

spaces 

• Adjustable temperatures from -20° 

to -15°C (-4° to +5°F) 

• Capacity: 5.6 cu. ft. (159L) 

• Manual defrost 

• R-134a CFC-free refrigerant 

• Base-mounted 360w compressor 

• Hydraulic thermostat 

• Baked-on, acrylic enamel exterior 

• Easy-to-clean formed interior 

• Three fixed shelves 

• Solid door is mounted to open from left 

L x W x H † 

Shipping Electrical 

Weight Requirements Cat. No. 

23.5 x 21 x 33.5”(64 x 54 x 85cm) 84 lb. 120V 60Hz 97-926-1 


Fisher Scientific* Isotemp* Standard Lab Incubator 

30° to 75°C (86° to 167°F) range 

Incubator with gravity flow circulation provides accurate, efficient 

heating for routine laboratory procedures: drying and staining of 

slides, paraffin embedding, tissue culture work, incubation of antibody 

tests, microbiological determinations, crystallization studies and more. 

Electrical receptacle inside (5A at 120V) to plug in a stirrer, shaker or 

other apparatus. 

• Capacity: 5.0 cu. ft. (141.6L) 

• Temperature: Range 30° to 75°C (86° to 167°F); average uniformity ±0.7°C at 

37°C; resolution 0.1°C; control sensitivity ±0.1°C; recovery time 2 min. 

• Air changes: 3/hr. 

• BTU/hr. at 75°C: 430 

Easy to operate 

• Microprocessor control 

• Keypad with arrow keys to increase or decrease set point temperature in 

0.1°C increments 

• Overtemperature value is automatically set at 3°C above setpoint 

• PID controller comes with fixed parameters so no tuning is required 

• Circuit breaker protects incubator from power surges; battery backup 

• Designed to stack two units 

Big three-character LED display 

• Digits display actual temperature to nearest 0.1°C 

• Display shows current value for set point temperature 

• HEAT indicator light cycles on and off to show when incubator heaters are on 

• ALARM indicator lights up if temperature exceeds overtemperature limit; 

backup controller maintains temperature at 3°C above setpoint; safety backup 

built into software 

Fisher Scientific* Sonic Dismembrators 

Choice of small or large volume processing with 50 to 700W of power 

• For 117V 50/60Hz 

• Includes generator, converter, 0.125 or 0.5” probe (depending on model), 

cables, wrench set 

Model 50 

• Economical, small-volume cell disruptor 

• Compact, portable and extremely simple to operate 

• Weighs less than 4 lb.; highly effective for cell disruption, sample preparation 

and many other small volume applications 

• Processes 0.2 to 50mL 

• 50W 

• Continuous or Remote operation (footswitch optional) 

• Lightweight converter for handheld operation 

Model 120 

• Programmable system for effective cell lysis and sample preparation delivering 

consistent and reproducible results 

• Ideal for small sample size 

• Manual and programmable operation 


• Programmable from 1 second to 10 hours 

• Overload protection 

• Pulse mode (1 second to 59 seconds) 

Model 505 

• High-power, programmable system ideal for nanotechnology, cell disruption 

and homogenization applications 

• Same programmable features as Model 120 but delivers substantially more 

power 

Construction 

• Durable, enamel-coated steel 

exterior 

• Extruded aluminium trim has 

acrylic powder coating 

• Easy-to-clean stainless-steel 

chamber 

• Low-watt-density heater elements 

are designed for long life 

• Silicone gasket on outer door and 

3” thick (7.6cm) fibreglass insulation 

throughout prevent heat loss 

• Outer door opens to 180° for unhindered access and features two grabbertype 

latches 

• Inner door is tempered glass 

• Two steel shelves (included): 17.37” wide and 16.75” front-to-back (44 × 

42.5cm) 

• Black synthetic rubber feet keep incubator from slipping and maintain a 

space between incubator and benchtop for ventilation 

• Exterior L × W × H: 23.5 × 26 × 39” (60 × 66 × 99cm) 

• Interior D × W × H: 18 × 18 × 26.5” (46 × 46 × 67cm) 

• Shipping weight: 145 lb. (66kg) 

• 120V 60Hz, 320w, 2.7A 


CSA approved. 

Model Capacity Shelves Cat. No. 

Large 5.0 cu. ft. (141.6L) 2 11-690-650D 

• Processes small and large sample 

volumes 


• 500W 

• Programmable from 1 second to 

10 hours 

• Pulse mode (1 second to 

59 seconds) 

• Energy display (watts and Joules) 

Model 705 

• Ultrahigh power with advanced 

programming for DNA shearing/ChIP and all liquid processing applications 

• Easy-to-use touchscreen control and overload protection 


• 700W 

• Programmable from 1 second to 99 hours 

• Saves up to 10 different programs 

• Pulse mode (1 second to 24 hours) 

• Temperature monitoring (requires optional temperature probe) 

Model Power Requirements Cat. No. 

50 50W FB-501-10 

120 120W FB-120-110 

505 500W FB-505-110 

705 700W FB-705-110 


5

Fisher Scientific* Isotemp* Standard Lab Ovens 

Gravity-flow convection ovens 

with electronic control, ideal 

for general laboratory drying 

• Temperature range: 50° to 225°C 

(122° to 437°F) 

• Quick, easy temperature setting 

• Backup temperature control 

• Fast temperature recovery time 

• Indicator lights show which 

thermostat is controlling oven 

temperature 

• Durable powder-coated steel exterior 

• Corrosion-resistant, easy-to-clean, stainless-steel interior 

• Exterior remains at safe temperature 

• Adjustable shelf heights 

• Oven temperature can be monitored in port on top 

• Door opens 180° and features grabber-type latch 

• Nonslip black synthetic rubber feet 

Model Small Large 

Capacity (Chamber Volume) 2.5 cu. ft. (70.8L) 5.0 cu. ft. (141.6L) 

Temperature Range 50° to 225°C 50° to 225°C 

Uniformity at 200°C ±5°C ±5°C 

BTU per Hour (200°C) 1325 2140 

Control Sensitivity ±0.5°C ±0.5° 

Recovery 2 minutes 4 minutes 

Air Exchanges per Hour 24 12 

Exterior L x W x H 23.5 x 25.75 x 26” 23.5 x 25.75 x 39.25” 

(60 x 65 x 66cm) (60 x 65 x 100cm) 

Chamber D x W x H 18 x 18 x 13.5” 18 x 18 x 26.5” 

(46 x 46 x 34cm) (46 x 46 x 67cm) 

Shipping Weight 115 lb. (52kg) 140 lb. (64kg) 

Electrical Requirements 120V 60Hz, 11A, 1300w 120V 60Hz, 11A, 1300w 

Cat. No. 13-247-625G 13-247-650G 

Fisher Scientific* Single Syringe Pump 

Easy-to-use, economical 

pump combines precise flow 

with exceptional durability 

• Dispensing volume: 10µL to 60mL 

• Wide flow range up to 519mL/hour 

• High-visibility backlit LCD 

• Auto shutoff volume dispense 

mode 

• Fast setup with built-in syringe size 

table 

• Rapid adjustments; fast forward/reverse 

• Stall indicator and power failure indicator 

• Quick-release drive nut for fast syringe installation and removal 

• Guide rod clamp prevents syringe damage 

• Durable housing with welded seams 

Electrical Requirements Cat. No. 

110V 60Hz 14-831-200 

220V 60Hz 14-831-201 

Fisher Scientific* Micromaster* II Microscope 

The versatility of a laboratory-grade 

microscope at a more affordable price 

— ideal for education and general 

laboratory use 

• Eyepiece: 10X wide-field, DIN standard 

• Head: monocular, interchangeable, rotatable 

360°, and inclined at 30° 

• Nosepiece: quadruple reversed nosepiece 

with precision click stops 

• Objectives: 4X/0.10 N.A., 10X/0.25 N.A., 

40X/0.65 N.A. retractable DIN standard 

achromatic objectives produce true colour 

images with sharp focus, are parfocal, 

parcentered and coated 

• Stage: precision-machined 125 × 135mm mechanical stage, chemicalresistant 

finish, removable spring-clip slide holder 

• Focus: ergonomically positioned coaxial coarse/fine controls; adjustable 

safety stop and tension adjustments prevent slide damage and contamination 

• Condenser: 1.25 N.A. Abbe, iris diaphragm, rack-and-pinion mechanism for 

precise focusing of light beam; swing-in filter holder and blue filter included 

• Illumination: variable-intensity 6V 20w quartz halogen lamp; solid-state dimmer 

• Finish: chemical-resistant baked-on paint with stipple finish to resist fingerprints 

and smudges 

• Dimensions: 9.5L × 7W × 14”H (24 × 18 × 35.5cm) 

• For 110V 50/60Hz 

• Includes dust cover, immersion oil, spare fuse, spare halogen lamp, heavyduty 

three-prong cord for use on 110VAC; can be factory-converted for use 

with 220VAC 

Body Objectives Cat. No. 

Monocular 4X, 10X, 40X, 100X oil immersion 12-561-4M 

Fisher Scientific* Isotemp* General-Purpose Refrigerator 

For safe, reliable storage 

• Thermostat control of temperatures ranging from 1° 

to 8°C with ±3° stability 

• Capacity, 17 cu. ft. (481L) 

• Automatic defrost 

• CFC-free (R404A) refrigerant, polyurethane insulation 

• White enamel-coated steel cabinet, white epoxy 

powder-coated steel interior 

• Solid door has hinge mechanism that holds door open 

at 95° angle, closes with a gentle push 

• Four adjustable legs ensure cabinet is level on irregular 

floors 

• Five fixed white epoxy-coated steel-wire shelves 

resist most acids, solvents and chemicals; provide 13.5 sq. ft. of shelving 

• Interior (D x W x H): 18 × 27 × 52” (46 × 69 × 132cm) 

• Exterior (L x W x H): 29 × 32 × 65” (74 × 81 × 165cm) (For specific cabinet dimensions 

and allowances, or for verification of clearance tolerances, contact 

your Fisher Scientific Customer Service Representative) 

• Net weight: 200 lb. (91kg) 

• Shipping weight: 230 lb. (105kg) 

• Equipped with NEMA 5-15P line cord plug; requires NEMA 5-15R receptacle 

• For 115V 60Hz 


CSA approved 


General-purpose Refrigerator 13-986-151B 


Fisher Scientific* Isotemp* Chromatography Refrigerator 

Ideal for use with entire TLC assemblies, 

tanks, plates, columns, developing tanks 

and rack/tank assemblies 

• Capacity: 45 cu. ft. 

• Temperature range: 1° to 12°C (33.8° to 53.6°F) 

• Average ±3° temperature stability 

• Microprocessor temperature set and adjust 

interior control 

• Exterior-mounted 0.5” (12.7mm) LED display with 

1° resolution 

• Automatic defrost 

• Keyed ON/OFF power switch 

Construction 

• Rust-resistant, phosphate-impregnated steel-coated with durable baked-on 

enamel 

• Two sliding Thermopane* glass doors — all with key locks — require no 

swing-out space — a valuable benefit in high traffic or narrow areas 

• White epoxy, powder-coated steel interior 

• White epoxy-coated steel-wire shelves (7.2 to 39 sq. ft.) resist most acids, 

solvents and chemicals; adjustable on 1” (2.5cm) centers 

• 2.5” thick (6.4cm) foamed-in-place, CFC-free urethane insulation 

• Casters 

• For 115V 60Hz; equipped with NEMA 5-15P line cord plug; require a NEMA 

5-15R receptacle 

• Alarm 

Dimensions 

D x W x H 

Amperage Shipping 

Weight 

Cat. No. 

32 x 53.5 x 78” 12.8A 561 lb. 11-670-214 

Fisherbrand* Stainless-Steel Desiccator Cabinets 

Manual relief valve lets you 

equalize chamber pressure 

before opening door 

• Polished stainless steel with 0.187” 

thick (4.8mm) glass 

• Airtight door with neoprene 

gasket, full-height hinges and 

double-action bar locks 

• Fixed wire shelf brackets every 

0.5” (13mm) 

• Includes two stainless-steel 

shelves, desiccant tray 

Standard Size 

• Glass on door and sides 

• Tray holds 454g of desiccant 

• Weighs 23 lb. (10kg) 

Large Size 

• Glass on door and back, stainless-steel sides 

• Shelf dimensions: 13.375 × 18” (34 × 46cm) 

• Weighs 57 lb. (26kg) 

Cabinet Size Outside L x W x H Cat. No, 

Standard 12.25 x 12.5 x 12.25” (31 x 32 x 31cm) 08-645-6 

Large 22.25 x 16.5 x 23” (56.5 x 42 x 58.cm) 08-645-11 

Fisher Scientific* Tube Rotator 

Versatile, robust rotator is 

suitable for most mixing needs 

• Digital microprocessor control 

• Five carousel options 

• Adjustable speed provides gentle or 

vigorous mixing action 

• Adjustable angled head offers 

mixing angles from 90 to 180° 

• Timer features both time up and 

time down counting modes 

• For 120V 50/60Hz 

• Includes 50mL tube carousel 


CSA approved 


Tube Rotator 05-450-200 

14-place tube carousel holds 27-34mm tubes 05-450-201 



63-place drum carousel holds 14mm culture tubes 05-450-204 

63-place drum carousel holds 18.5mm culture tubes 05-450-205 

Fisherbrand* Bottle-Top Bottle-Top Dispensers 

Five fully adjustable models cover a 

dispensing range from 0.05 to 50mL 

Deliver even aggressive liquids and 

organic solvents safely and effortlessly 

(except hydrofluoric acid). 

• Precision valve mechanism ensures easy 

priming and minimum reagent waste, with no 

leakage back to the reservoir 

• Polypropylene protection sleeve surrounds 

the borosilicate glass barrel 

• Antidrip taps prevent accidental spillage 

• Spring-lock provides quicker, more accurate 

volume selection 

• Dispenser head can be rotated 360° 

for convenient dispensing and volume 

adjustment 

• Smooth-moving PTFE piston minimizes 

operator fatigue and can be removed in seconds for cleaning 

• Dispensers fit directly onto 30mm-neck bottles 

• Accuracy: ±0.3% at maximum volume 

• Repeatability: ±0.1% or better 

• Fully autoclavable to 121°C (250°F) 

Range Increments Cat. No, 

0.05-2.5mL 0.05mL 03-692-177 

0.1-5mL 0.1mL 03-692-178 

0.2-10mL 0.2mL 03-692-179 

1-30mL 1mL 03-692-180 

1-50mL 1mL 03-692-181 


7

Fisherbrand* Countdown Timer 

For general-purpose timing applications 

• One timing channel and a single-line display 

• Rugged ABS plastic case 

Timer Range Accuracy Display Power Supply Alarm Features Cat. No. 

24 Hours 0.01% Double-line LCD, 1-year silver-oxide Distinct alarm for each channel, 1 minute, --- 06-662-44 

each 0.375”H 

silenced automatically or manually 

100 Hours 0.01% 0.75”H LCD, readable 2-year “AAA” 30 Seconds, silenced automatically or Memory reset 06-662-51 

from 20’ 

manually 

100 Hours 0.01% 6-digit, 0.75H” LCD 2-year silver-oxide High-decibel; 1 minute, silenced 

“Thru-zero” function, time-out 14-649-17 

automatically or manually 

mode, and automatic repeat 

Alarm Thermometer 

Temperature-buffered sensorsealed 

in bottled glycol 

solution provides accurate 

reading when freezer/ 

refrigerator doors are open 

• Monitors temperature in freezers, 

refrigerators, incubators, water 

baths and heating blocks 

• Triple display simultaneously 

shows current, high and low 

temperatures 

• Alarm set in 1° increments alerts 

user with visual and audible 

signals if temperature goes outside 

setpoints 

• 10’ Long (3m) microcable 

• Dimensions: 4.25L × 2.75W × 0.75”H (11 × 7 × 2cm) 

Range Resolution Accuracy Cat. No. 

-50° to +70°C/-58° to +158°F 1° ±1°C 06-664-11 

Fisherbrand* Countdown Timers 

For general-purpose timing applications 

• One timing channel and a single-line display 

• Rugged ABS plastic case 

14-649-14 

• Countdown and stopwatch (countup) functions with automatic rollover and time-out mode 

• Full keyboard (0 to 9 keys) 

Fisher Scientific* Traceable* Waterproof/Shockproof 

Stopwatch 

With single-action, time-in/time-out, 

cumulative split and continuous timing 

Unit times to 24 hours. Resolution is 0.01 

second for the first 30 minutes, then continues 

timing to 23 hours, 59 minutes, 59 seconds in 

1-second increments. 

• Chronograph displays time-of-day to the second, 

AM/PM, date and day of the week 

• Time-of-day alarm 

• Digits are 0.375” high 

• O-ring sealed with durable ABS plastic case 

• Ideal for lab or plant use 

• Accuracy is 0.01% 

• Dimensions: 2.12L × 2.75W × 0.5”H (5.4 × 6 × 1.3cm) 

• Net weight: 1 oz. (28g) 

• Includes two-year battery, lanyard and instructions 


Individually serial-numbered Traceable Certificate is provided from 

an ISO 17025 calibration laboratory accredited by A2LA*. It indicates 

traceability to standards provided by NIST*. 


Waterproof/Shockproof (Waterproof to three atmosphere) 06-662-56 

Timer Range Accuracy Display Power Supply Alarm Features Cat. No. 

Countdown from 100 min- 0.01% 0.375H LCD 2-year 1 Minute, silenced Countdown and stopwatch (countup) func- 14-649-14 

utes: countup to 60 minutes 

silver-oxide automatically or manually tions with automatic rollover and time-out 

mode. Full keyboard (0 to 9 keys) 


Fisherbrand* Lab-Jacks* 

Nonsparking anodized 

aluminium plates for 

maximum safety in the lab 

• For supporting hotplates, baths, 

glassware and other items 

requiring stable elevation 

• 14-673-51, 14-673-52, 14-673-53 

feature threaded holes to 

accommodate an 18.87” (48cm) long 

aluminium rod for mounting ring stands 

and other lab apparatus 

• Rod available separately 

Plate L x W Max. Load Max. Height Cat. No. 

3 x 3” (7.6 x 7.6cm) 8.8 lb. (4kg) 3.5” (8.2cm) 14-673-15 

4 x 4” (10 x 10cm) 30 lb. (14kg) 5.5” (14cm) 14-673-50 

6 x 6” (15 x 15cm) 50 lb. (27kg) 11” (27cm) 14-673-51 

8 x 8” (20 x 20cm) 79 lb. (36kg) 11” (27cm) 14-673-52 

12 x 12” (30 x 30cm) 143 lb. (65kg) 19” 48cm) 14-673-53 

Fisherbrand* Finnpipette* II Adjustable-Volume Pipetters 

Fully autoclavable for absolute sterility 

• Fast-dial system allows 0.1µL fine adjustment 

• Microsize pipetters include “super blow-out” 

feature that ensures a high level of precision 

and accuracy at low-volume settings 

• Telescopic piston boosts the power of the 

blow-out step, preventing the capillary action 

that can hinder delivery of residual liquid 

• Soft-touch tip ejection — a gearing mechanism 

that produces increased downward force 

for tip release — also helps relieve hand stress 

• Reverse pipetting mode allows pipetting of 

viscous and surface-active solutions 

• Fully autoclavable; entire pipetter can be 

autoclaved 

• Lightweight, ergonomic design with modified 

finger rest and rounded handgrip defends 

against fatigue 

Fisher Scientific* accuTupH* Rugged Bulb pH Combination Electrode 

Mercury-free 

• Double junction 

• Ag/AgCl reference 

• Glass body 

• Gel-filled, refillable 

• 0-14pH 

• 0° to 80°C 

Fisher Scientific* accumet* Liquid-Filled Polymer 

Body Combination Electrode — Mercury-Free 

Ideal for measurements in small vessels or with 

small samples 

• Rugged polypropylene body — ideal for handheld use 

with aqueous samples 

• Endcap seal keeps membrane moist and ready 

• 0 to 14pH range 

• Porous ceramic junction 


Single junction pH combination; Ag/AgCI reference; 

Polypropylene body; BNC connector 

13-620-287A 

Range Increments Accuracy (%) † Precision (CV%) Cat. No. 

0.2-2µL, micro 0.01µL ±12.0 to 2.5 10.0 to 2 21-377-814 

0.5-10µL, micro 0.1µL ±2.5 to 1.0 2.0 to 0.5 21-377-815 

0.5-10µL 0.1µL ±3.5 to .10 3.0 to 0.8 21-377-816 

2-20µL 0.1µL ±3.0 to 1.0 1.5 to 0.4 21-377-817 

5-50µL 0.5µL ±3.0 to 0.6 2.5 to 0.3 21-377-818 

10-100µL 1µL ±3.0 to 0.8 1.0 to 0.2 21-377-819 

20-200µL 1µL +1.8 to 0.6 0.7 to 0.2 21-377-820 

100-1000µL 5µL +1.0 to 0.6 0.6 to 0.2 21-377-821 

200-1000µL 5µL +0.9 to 0.6 0.3 to 0.2 21-377-822 

1-5mL 0.05mL ±0.8 to 0.5 0.3 to 0.2 21-377-823 

2-10mL 0.1mL ±1.0 to 0.5 0.3 to 0.2 21-377-824 

† When a range is given, the first value applies to the lowest dispensed volume, and the second, to the highest dispensed 

volume, with one exception: for the 0.5 to 10µL pipetter, the first value is for a dispensed volume of 1µL. 

• Length: 102mm; diameter: 10mm 

• BNC connector 

• Cap colour: Purple 

Temperature Length/Dia. 

Description 

Cap Colour Fill Solution Connector[s] pH Range Range (°C) (mm) Cat. No. 

Double junction, Ag/AgCl reference P SP138-500 BNC 0 to 14pH 0° to 80°C 102 13-620-183A 


9

Fisherbrand* Traceable* Digital Callipers 

Switch from inches to 

millimeters, set jaws 

closed or read differential 

measurements with the touch 

of a button 

• 0.33” (0.84cm) high digital display 

• Durable hardened steel 

• Resolution: 0.0005” or 0.01mm 

• Accuracy: ±0.001” or ±0.03mm 

• Runs on supplied 1.5V Button Cell 357 battery for 10,000 hrs. 

(replace with Cat. No. 02-440-1C) 

9” (22.9cm) Model 

• Range: 0 to 6” (0 to 150mm) 

• Dimensions: 9 × 3” (22.9 × 7.6cm) 

• Weight: 5 oz. (141.7g) 

11” (27.9cm) Model 

• Range: 0 to 8” (0 to 200mm) 

• Dimensions: 11 × 3” (27.9 × 7.6cm) 

• Weight: 6 oz. (170g) 


Supplied with serial-numbered certificate from an ISO 17025 calibration 

laboratory indicating traceability to NIST* standards. 

Model Read Range Cat. No. 

9” (22.9cm) 0 to 6” (0 to 150mm) 06-664-16 

11” (27.9cm) 0 to 8” (0 to 200mm) 14-648-17 

Fisherbrand* Counter-Pen 

Combination marker/digital 

counter suits both laboratory 

and plant use 

Each time a mark is made with 

the felt-tipped pen, the counter 

beeps and its easy-to-read LCD 

displays the count. Can be used 

to count cell growth on Petri 

dishes, inventory parts or tally 

samples received. 

• Marks hold your place while 

counter tracks your total 

• Touch, sound and count occur 

simultaneously 

• Counter reads to 99,999 

• Fail-safe reset 

• Length: 6” (15.2cm) 

• Weight: 1 oz. (28.4g) 

Cat. No. 14-649-77 

Fisherbrand* Motorized Pipet Fillers/Dispenser 

Comfortable pipetting with 

precise control 

Ultra-lightweight (just over 6 oz. 

[173g]) and compact, pipet controller 

operates for eight hours from a single 

charge; low battery light indicates 

one hour of use remaining. During 

recharging, Filler/Dispenser can 

remain in use. 

• Mode switch enables selection of three 

aspirate/dispense speeds, all of which 

are easily controllable by the triggers 

• “High” setting to aspirate/dispense at full speed with blowout 

• “Low” to aspirate/dispense at reduced speeds with blowout 

• “G” to aspirate at reduced speed, dispense by gravity (for pipets designed 

“To Deliver”) 

• Comfortable, concave finger triggers give you additional variable control of 

pipetting speed at any setting 

• Traditional pistol-shaped body to permit use in laminar flow hoods or 

biological safety cabinets 

• Comes with two spare filters (one each 0.45µm and 0.2µm); autoclavable pipet 

adapter bench stand; AC recharger; instructions; two-position bench stand 

which allows charging of the units with or without a pipet in place 

Colour Cat. No. 

Blue 03-692-164 

Fisherbrand* Hand Tally Counter 

For counting blood cells, drops of 

liquid, inventory items, etc. 

• Tallies up to 9999; compact 

• Chrome-finished metal construction for 

reliability, long life and hard usage 


Hand Tally Counter 07-905-6 


Fisherbrand* Polymer Carts 

Rugged mobile carts for 

wide variety of uses 

High-density polypropylene shelves offer superior 

corrosion and chemical resistance. Shelves are mounted 

on a chrome-plated frame. Carts roll easily on four 4” 

swivel casters. 

• Capacity:150 lb. per shelf (68kg); 400 lb. maximum cart load 

(181kg) 

• Corrosion-proof polymer shelves 

• Raised shelf edges contain spills 

• Ergonomic handle 

• Ultimate cleanability: smooth surfaces are designed to resist 

staining and wipe clean easily 

• Easy, no-tool assembly (ships flat) 

• BC series shelves feature 0.5” raised ship’s edge design 

• Deep Ledge series shelves feature a deeper 2.75” ledge for 

better spill containment 

• Three-shelf models feature a center shelf that adjusts in 

1” increments 

No. of Shelves 

BC Series Carts 

Dimensions (L x W x H) Weight Cat. No. 

3 29.5 x 18 x 33.25 (75 x 45.7 x 84.5cm) 33 lb. (15kg) 13-451-181 

2 33.75 x 21.5 x 33.25” (85.7 x 54.6 x 84.5cm 34.5 lb. (15.6kg) 13-451-182 

3 33.75 x 21.5 x 33.25” (85.7 x 54.6 x 84.5cm) 43 lb. (19.5kg) 13-451-183 

Deep Ledge Series Carts 

3 33.75 x 21.5 x 41” (85.7 x 54.6 x 104cm) 37.5 lb. (17kg) 13-451-184 

2 38.75 x 27 x 41” (85.7 x 68.6 x 104cm) 35 lb. (15.8kg) 13-451-185 

3 38.75 x 27 x 41” (85.7 x 68.6 x 104cm) 46.5 lb. (21kg) 13-451-186 

FisherBiotech* Horizontal Electrophoresis Systems 

Choose from two systems 

Minigel System 

• Ideal for quick screening 

• Uses 7 × 10cm gel tray with two comb positions 

• Runs up to 16 samples on one gel with combs supplied 

• Can run up to 24 samples on a gel with accessory combs 

• Provides easy, leak-free casting without tape, grease 

or seals 

Midigel Systems 

• Available with proprietary buffer recirculation method 

which prevents buffer’s ionic depletion on long gel 

runs, keeps ionic gradients from distorting results 

when multiple sample series are run simultaneously and 

prevents pH changes that can cause problems in RNA 

gels 

• Provide leak-free gel casting in 13 × 16cm gel tray with 

two comb positions 

• Run up to 32 samples on one gel with combs supplied 

or up to 48 samples with accessory combs 

System Gel Size Buffer Volume L x W x H Type Cat. No. 

Minigel 7 x 10cm 400mL 6.31 x 3.75 x 3.13” (16 x 9.5 x 8cm) Standard FB-SB-710 

Midigel 13 x 16cm 800mL 9.63 x 7.06 x 3.13” (24.5 x 18 x 8cm) Standard FB-SB-1316 


11

General SupplieS 

Fisherbrand* Powder-Free Nitrile Exam Gloves 

Exceptional durability and puncture resistance 

• Latex-free nitrile construction 

• Textured surface ensures excellent grip 

• Beaded cuff for easier donning 

• Nonsterile, ambidextrous 

• Length: 9.5” (24cm) 

• Fingertip thickness: 4mil 

• Colour: Blue 


CGSB and CFIA approved 

Size Cat. No. 

X-Small 27-058-50 

Small 27-058-51 

Medium 27-058-52 

Large 27-058-53 

X-Large 27-058-54 

XX-Large 29-635-7854 

Fisherbrand* Powder-Free Latex Exam Gloves 

Provide a watertight barrier 

for protection from infectious 

materials 

• Made of surgical-quality natural rubber 

latex 

• Puncture- and tear-resistant with 

textured fingers 

• Beaded cuff promotes easy donning 

• Powdered gloves are lightly dusted with 

USP absorbable dusting powder 

• Powder-free gloves are fully textured for excellent gripping power 

• Ambidextrous, nonsterile, single-use 

• Length: 9.5” (24cm) 

• Thickness: 5mil 

Pk/100 

• Colour: White 

Fisherbrand* Disposable Vinyl Powdered Examination Gloves 

Fisherbrand* Disposable Powder-free Vinyl 

Examination Gloves 

Ambidextrous design with superior 

fit and flexibility for maximum tear 

resistance 

• Medical grade 

• Nonsterile 

• Beaded cuff 

• Lengths: 235mm (small and medium), 

245mm (large) 



Fisherbrand* Disposable Latex Medical Examination Gloves 

Ideal for healthcare and laboratory 

applications 

Gloves provide exceptional dexterity 

and tactile sensitivity. The 100% pure 

polymer formulation does not include 

extenders or fillers to degrade elasticity 

or promote wicking of chemicals. 

• Lightly powdered with USP type 

cornstarch 

• Beaded cuff prevents rolldown 

• Length: 23cm (9”) 


COMPLIANCE: 

Tested in accordance with ASTM D3578 



Ambidextrous design with superior fit and flexibility for maximum tear resistance 

Lightly powdered with USP cornstarch for easy on/off. Excellent sensitivity and comfort. High elasticity of vinyl 

provides unrestricted hand movement. Gloves do not contain DOP plasticizer. 


• Nonsterile 

• Beaded cuff 

• Lengths: 235mm (small and medium), 245mm (large) 



Pk/100 

Size Length Cat. No. 

X-Small 9.5” (24cm) 11-394-5EE 

Small 9.5” (24cm) 11-394-5AA 

Medium 9.5” (24cm) 11-394-5BB 

Large 11.6” (29.5cm) 11-394-5CC 

X-Large 9.5” (24cm) 11-394-5DD 

Pk/100 

Size Cat. No. 

Small 11-395-20A 

Medium 11-395-20B 

Large 11-395-20C 

Pk/100 

Size Cat. No. 

X-Small 11-394-125D 

Small 11-394-125A 

Medium 11-394-125B 

Large 11-394-125C 

Pk/100 

Size Cat. No. 

Small 11-394-120A 

Medium 11-394-120B 

Large 11-394-120C 

X-Large 11-394-120CC 


Fisherbrand* Stir Bars 

Egg-shaped or octagonal stir 

bars provide greater mixing 

action 

Egg-shaped Stir Bar (14-513-53) 

• Covered with PTFE 

• For use in round-bottom vessels 

• Spin unrestricted by vessel contour 

• Dia. x L: 1.25” (31mm) x 0.62” (15mm) 

Octagonal Stir Bars 

• Magnetic 

• With pivot rings 

• Alnico-V magnets encased in PTFE fluoropolymer 

• Individually packed on blister cards 

Diameter Length Cat. No. 

1.25” (31.7mm) 0.25” (15mm) 14-513-53 

0.38” (9.5mm) 1” (25mm) 14-513-51 

0.38” (9.5mm) 1.5” (38mm) 14-513-52 

0.31” (8mm) 0.5” (13mm) 14-513-58 

0.31” (8mm) 1” (25mm) 14-513-59 

0.31” (8mm) 1.5” (38mm) 14-513-60 

0.31” (8mm) 2” (51mm) 14-513-61 

0.31” (8mm) 0.625” (15.8mm) 14-513-62 

0.38” (9.5mm) 2” (51mm) 14-513-66 

0.38” (9.5mm) 2.5” (64mm) 14-513-67 

0.5” (13mm) 3” (72mm) 14-513-68 

Fisherbrand* Magnetic Micro Stirring Bars 

For stirring in test tubes, 

micro beakers 

• Covered with PTFE fluoropolymer 

• Each bar packaged on blister 

cards 

Diameter Length Cat. No. 

0.06” (1.5mm) 0.32” (8mm) 14-513-64 

0.08” (2mm) 0.28” (7mm) 14-513-63 

0.13” (3mm) 0.38” (10mm) 14-513-65 

0.13” (3mm) 0.5” (12.7mm) 14-513-98 

Fisherbrand* Colour-Coded ABS Plastic Boxes 

Provide dust-free storage; available in five colours 

• Hold 3 × 1” and 75 × 25mm slides 

• Numbered slide partitions 

correspond to numbered index 

card in lid 

• Stackable 

• With hinged lid 


Blue 03-448-1 

Green 03-448-2 

Red 03-448-3 

Yellow 03-448-4 

White 03-448-5 

Fisherbrand* Cardboard Tray for 20 Slides 

Slides lie flat on tray 

• Heavy reinforced cardboard tray 

holds 3 × 1” or 75 × 25mm slides 

• Spaces numbered to correspond 

with index on outside 

• Doors are hinged for 360° opening; 

they do not lie directly on slides 

when closed 


Tray for 20 Slides 12-587-10 

Fisherbrand* Qualitative Grade Plain Circles and Sheets — 

P8 Grade 

Cellulose fibre papers 

• Particle Retention: 20–25µm 

• Porosity: Coarse 

• Filtration Speed: Herzberg, 

55 seconds 

• Flowrate: Fast — 160mL/min. 

• Surface: Smooth, open texture 

Pk/100 

Outside Dia. [circles] or L x W [sheets] Cat. No. 

5.5cm dia. 09-795A 

7cm dia. 09-795B 

9cm dia 09-795C 

11cm dia. 09-795D 

12.5cm dia. 09-795E 

Fisherbrand* Aluminium Weighing Dishes 

Aluminium dishes for weighing 

and dispensing 

With Fluted sides 

• Can serve as evaporating dishes 

or dust covers 

• Lightweight, yet sturdy 

• Convenient finger-grip handle can 

be etched prior to weighing for 

identification 

With Smooth sides 

• Lightweight dishes with flanged rims 

• Slightly sloping sides facilitate stacking 

• Especially useful for materials that cannot easily be cleaned from dish surface 

Capacity Bottom I.D. x Top I.D. Depth Pk/ Cat. No. 

20mL 1.72 x 2” (4.4 x 5.2cm) 0.53” (1.3cm) 100 08-732-100 

42mL 2 x 2.42” (5.1 x 6.2cm) 0.67” (1.7cm) 144 08-732-101 

85mL 2.69 x 3” (6.9 x 7.7cm) 0.63” (1.6cm) 100 08-732-102 

70mL 2.66 x 2.83” (6.82 x 7.26cm) 0.675” (1.73cm) 100 08-732-103 

150mL 3.74 x 3.98” (9.6 x 10.2cm) 0.77” (2cm) 100 08-732-104 


13

Fisherbrand* Sparkleen* 1 Detergent 

Removes proteins, fats, oils, media, wax pencil 

marks, dried blood and other organic-inorganic 

deposits from glassware 

• For manual washing 

• Fast-dissolving powder 

• Free rinsing 

• Contains phosphates 

• Softens water, removes stains 

Size Cat. No. 

3.33 lb. box (1.5kg) 04-320-4 

Fisherbrand* Cryo/Freezer Boxes 

Simple design for versatile 

use 

• Accommodate tubes from 0.5 to 

50mL 

• Unbreakable white fibreboard to 

protect samples 

• Surface is easy to write on for 


• Sized to fit all standard stainlesssteel 

and polycarbonate storage 

systems 

• Protective coating prevents water or liquid nitrogen from saturating box for 

increased longevity 

• Tight lid-to-box fit means accidental separation is next to impossible 

• Bottom drain holes allow safe drainage of liquid nitrogen, prevent moisture 

buildup 

• Catalogue numbers are printed on box lids for easy reorder 

• Can be used in mechanical freezers and liquid nitrogen tanks at temperatures 

to -196°C 

L x W x H No. of Cells Cat. No. 

3 x 3 x 2” (7.6 x 7.6 x 5.1cm) 25 03-395-112 

5 x 5 x 2” 12.7 x 12.7 x 5.1cm) 81 03-395-464 

5 x 5 x 2” 12.7 x 12.7 x 5.1cm) 100 03-395-465 

Fisherbrand* Dissecting Dressing Forceps 

Treated for increased 

resistance to corrosion 

• Can be sterilized by EtO/gamma 

radiation 

• Rockwell hardness (HRC): 40–45 

• Electronically passivated 

• Autoclavable up to 135°C 

• Latex-free 

• Forged, surgical-grade stainless steel 

• Patterned handles 

• Hand polished 

Tip Style Length Cat. No. 

Straight, Serrated 4.5” (114mm) 13-812-39 

Straight, Serrated 6” (152mm) 13-812-40 

Fisherbrand* Sharps-A-Gator* Sharps Containers 

Red puncture-resistant 

polypropylene that can be 

autoclaved or incinerated 

General-purpose Sharps Container 

• Clear locking lid 

• Marked with biohazard label 

• Easily mounts on walls and carts, 

nests to conserve storage space 

• Capacity: 1 gal. (3.8L) 

General-purpose Wide Container 

• Wide opening accommodates large devices 

• Wide base for stability 

• Sliding lid operated with thumb tab 

• Available with locking wire brackets, non-locking wire brackets and tray holders 

• Capacity: 2 gal. (7.5L) 

Phlebotomy Container 

• Sliding lid 

• One-piece design 

• Translucent top with holder for blood tubes 

• Needle remover 

• Capacity: 1 qt. (1L) 

Point-of-use Container 

• High top 

• With biohazard label 

• Capacity: 5 qt. (4.5L) 

Model Capacity Cat. No. 

General-purpose 1 gal. 14-827-63 

General-purpose Wide 2 gal. 22-037-959 

Phlebotomy 1 qt. 14-827-109 

Point-of-Use 5 qt. 14-827-122 

Fisherbrand* Red-Spirit* No-Roll Laboratory Thermometers 

Accurate temperature readings 

without environmental 

hazards of mercury 

• With white back 

• Permanently fused markings printed vertically for easy reading 

• Nonroll fittings 

Range 

Low High Length Immersion Subdiv. Cat. No. 

-20°C 110°C 12.0” (305mm) 2.99” (76mm) 1°C 14-997 

0°F 230°F 12.0” (305mm) 2.99” (76mm) 2°F 14-998 

Fisherbrand* Low-Nitrogen Weighing Paper 

For analytical balances 

• Sufficient body to support sample 

• Smooth textured to avoid trapping 

material 

• Does not absorb moisture 

Pk/500 

L x W Cat. No. 

3 x 3” (76 x 76mm) 09-898-12A 

4 x 4” (100 x 100mm 09-898-12B 

6 x 6” (152 x 152mm) 09-898-12C 


Fisherbrand* White Autoclavable Tape 

For steam sterilization 

• Excellent adhesive backing sticks 

securely 

• Removes easily without leaving 

residue 

• White steam-sensitive stripes 

turn black when passed through a 

steam sterilization cycle 

• Roll length: 60 yd. (55m) 

Wide Cat. No. 

0.50” (12.7mm) 15-903 

0.75” (19mm) 15-904 

1” (25.4mm) 15-905 

Fisherbrand* Glass-Disposal Boxes 

Disposal boxes keep glass separate from 

other waste 

• Sturdy, corrugated cardboard 

• With tough 2mm-thick polyethylene liner 

• Identifying graphics with instructions 

• Unique integral lid provides added safety 

Model L x W x H Cat. No. 

Benchtop 8 x 8 x 10” (20 x 20 x 25cm) 12-009-7B 

Intermediat 12 x 12 x 20” (30 x 30 x 51cm) 17-988-448 

Floor 12 x 12 x 27” (30 x 30 x 69cm) 12-009-7A 

Fisherbrand* Hexagonal Polystyrene Weighing Dishes 

Design provides greater 

balance, protection and safety 

• Bend easily into pouring spouts to 

enable nonspill transfer 

• Flat bottoms and sloping sides with 

0.187” (4.8mm) inside corner radius 

ensure complete transfer 

• Do not react to most substances 

• Disposable 

• Stack compactly for convenient 

storage and accessibility 

• Not for use over 90°C 

Bottom I.D. Top I.D. Depth Approx. Weight Cat. No. 

1.8” (4.7cm) 2.6” (6.7cm) 0.625” (1.5cm) 0.05 oz. (1.4g) 02-202-101 

3.3” (8.5cm) 4.3” (11cm) 0.875” (2.2cm) 0.14 oz. (4.0g) 02-202-102 

3.6” (9.2cm) 5.1” (13.2cm) 1.25” (3.2cm) 0.25 oz. (7.1g) 02-202-103 

Fisherbrand* Scoopula* Spatula and Handle 

Dig out materials, core and stir easily 

• Minimizes spilling in handling 

small amounts of material 

• One pointed end, one blunt end 

• Stainless steel does not rust 

• Wooden handle fastens to either end of spatula — 

extends reach, gives added prying power 

Pk/500 

Pk/10 

Description Overall Length Cat. No. 

Spatula 6” (15cm) 36-101-2365 

Fisherbrand* Spoonulet* Lab Spoon 

For transferring crystalline 

materials, crushing lumps, 

scraping or chopping 

• Polished stainless steel 

• Spoon end: 1.25L x 0.56”W (32 x 14mm) 

• Spatula end: 2L x 0.31”W (51 x 7.9mm) 

Length Cat. No. 

7.25” (18.4cm) 14-375-20 

Fisherbrand* Spoonula* Lab Spoon 

For transferring crystalline 

materials, crushing lumps, 

scraping or chopping 

• Polished stainless steel 

• Snag-free 

• Spoon end: 1.25L x 0.56”W (32 x 14mm) 

• Spatula end: 2L x 0.31”W (51 x 7.9mm) 

COMPLIANCE: 

ASTM* (F899-84) standard stainless-steel 

Length Cat. No. 

9” (23cm) 14-375-10 

Fisherbrand* Orange Autoclave Bags without 

Sterilization Indicator 

• Maximum temperature, 127°C (260°F); use at 121°C 

(250°F) 

• Printed in English 

• Bags not supplied with wire-tie closures 

Fisherbrand* Lab Blender Bags 

Superior wall strength 

Pk/100 

W x L Cat. No. 

8.5 x 11” (21.5 x 28cm) 01-815-1 

12 x 24” (30 x 61cm) 01-815A 

24 x 30” (61 x 76cm) 01-815B 

24 x 36” (61 x 91cm) 01-815C 

• Internal sterility assured with tear-off 

sterile barrier top 

• Highly transparent and punctureresistant 

virgin polyethylene 

extruded tube material 

• No side seams, one wide bottom seal 

• Simply tear the perforated end along the top, open, and insert the material to 

be analyzed and processed 

Fits Stomacher* 

W x L 

Capacity Model 

Pk/ Cat. No. 

3mil Thick Single Chamber 

4 x 6” (10 x 15cm) 7.5 oz. (225mL) 80 250 01-002-54 

7 x 12” (18 x 30cm) 55 oz. (1650mL) 400 250 01-002-55 

15 x 20” (38 x 51cm) 600 oz. (18L) 3500 250 01-002-58 

4mil Thick Single Chamber 

7 x 12” (18 x 30cm) 55 oz. (1650mL) 400 250 01-002-56 

15 x 20” (38 x 51cm) 600 oz. (18L) 3500 250 01-002-59 

3mil Thick Two Chamber 

7 x 12” (18 x 30cm) 55 oz. (1650mL) 400 100 01-002-57 


15

Fisherbrand* Hayman Style Microspatulas 

For fine operations or no-spill 

carrying of small quantities 

• Nickel-stainless-steel blade with 

glazed finish 

• With blade or V-shaped blade spoon 

• Stem dia.: 0.103” (2.6mm) 

• Spatula end: 1.25L x 0.125”W (32 x 3.2mm) 

• Spoon end: 0.5L x 0.125”W (13 x 3.2mm) 

Type Cat. No. 

Hayman Microspatula 21-401-25A 

Hayman MIcrospatula w/Spoon 21-401-25B 

Fisherbrand* Transfer Pipet Brush 

Cone-shaped brush with stiff 

nylon bristles for cleaning 

transfer pipets 

• Nylon bristles 

Overall Length Bristle L x Dia. Cat. No. 

17” (43cm) 7.5 x 0.93” (19 x 2.4cm) 03-625 

Fisherbrand* Budget-Priced Brush 

Economical brushes for test 

tubes 

• Galvanized wire handles resist rust and corrosion. 

Overall Length Bristle L x Dia. Cat. No. 

10.5” (26.67cm) 4 x 1.37” (10 x 3.5cm) 03-573 

Fisherbrand* Full-Size Faceshield 

High-quality, optically clear, 

distortion-free 7mil film 

• Polyester lens is treated with 

antifog and antistatic coating 

• Headpiece is held in place by a 

stretch strap and includes a latexfree, 

hypoallergenic foam band for 

comfortable extended wear 

Pk/25 


Full-Size 19-460-102 

Fisherbrand* Pipet-Filling Bulbs 

Flexible, easy-to-attach bulbs 

• For medicine droppers and small 

pipets 

• Amber latex 

• Dry natural rubber 

Capacity Cat. No. 

1mL 03-448-21 

2mL 03-448-22 

Fisherbrand* “Zipper” Seal Sample Bags 

Zipper-locking feature 

securely seals bags 

• Durable, transparent polyethylene, 

4mil thick 

• Ideal for collecting, storing and 

protecting laboratory specimens 

and samples easily and 

conveniently 

• Clear, print-free surface lets 

user mark and label each bag 

separately 

• Not recommended for use with liquids 

Pk/50 


4 x 6” (10 x 15cm) 01-816A 

5 x 8” (13 x 20cm 01-816D 

6 x 13” (15 x 33cm) 01-816B 

9 x 13” (23 x 33cm) 01-816E 

9 x 18” (23 x 46cm) 01-816C 

9 x 26” (23 x 66cm) 01-816F 

Fisher Scientific* Soil-Resistant Chair 

Ideal for work environments demanding 

materials impervious to oil and dirt 

• High-profile, puncture-resistant polyurethane 

seat and back are perfect for areas where 

steam cleaning is a must 

• Pneumatic mechanism controls seat height 

• Flame-resistant and produced CFC-free 

• Features roomy 17.375L × 17.5W × 1.5”H thick 

(44.1 × 44.5 × 3.8cm) seat 

• Backrest adjusts horizontally 3” (7.6cm) 

forward and 3” (7.6cm) backward; vertically 3” 

(7.6cm) up and 3” (7.6cm) down 

• Backrest dimensions: 15W × 10H × 1.375” thick (38.1 × 25.4 × 3.5cm) 

• Base diameter: 24” (61cm) 

Description Seat Height L x W x H Cat. No. 

Low form 17 to 22.5” 

23.5 x 23.5 x 30” 14-359-324 

(43.2 to 57.1cm) (59.7 x 59.7 x 76.2cm) 

High form 23.5 to 33.5” 23.5 x 23.5 x 44” 14-359-320 

with glides (59.7 to 85.1cm) (59.7 x 59.7 x 111.8cm) 

High form 23.5 to 33.5” 23.5 x 23.5 x 44” 14-359-800 

with casters (59.7 to 85.1cm) (59.7 x 59.7 x 111.8cm) 


Fisher Scientific* accuCap* Capillary Junction pH Combination Electrode — Mercury-Free 

Large junction for increased flow, minimal clogging 

• Glass body fluid gel refillable 

• Unique fluid-gel electrolyte and accuCap 

junction provide faster flowrate, improved 

contact between electrolyte and sample 

• Faster response time and very accurate 

readings 

• Double-liquid-junction further extends 

diffusion barrier for increased electrode 

life in aggressive samples 

• Performs well in liquids with low ion 

concentration and in partly aqueous 

samples 

Fisherbrand* Porcelain Büchner Funnels with Fixed Perforated Plates 

For suction filtration applications 

• Autoclavable 

• Highly resistant to chemical attack 

• Without cover 

• Glazed inside and outside with the exception of the rim 

Fisherbrand* High-Form Porcelain Crucibles 

Withstand temperatures up to 1150°C (2102°F) 

• Glazed inside and out except for outside bottom surface and rim 

• Covers available separately 

Description Cap Colour † Fill Solution ‡ pH Range Temperature Range (°C) Length/Dia. Cat. No. 

Glass body, 

refillable 

P 13-636-430 0 to 14pH 0° to 80°C 160mm/12mm 13-620-130 

† Cap Colour: P (Purple) = biological, pharmaceutical and TRIS applications. 

‡ Fill Solutions: Cat. No. 13-636-430 is fluid-gel KCI solution. 

Capacity Bottom Inner Dia. x H Top Outer Dia. Filter Paper Dia. Perforated Dia. Unit Weight Cat. No. 

0.067 oz. (2mL) 0.55 x 2.52” (14 x 64mm) 20mm 13mm 8mm 0.022 lb. (10g) FB-966-A 

1.014 oz. (30mL) 1.61 x 3.5” (41 x 89mm) 52mm 35-40mm 24mm 0.15 lb. (70g) FB-966-B 

2.941 oz. (87mL) 2.2 x 4.4” (56 x 112mm) 68mm 50-55mm 38mm 0.3 lb. (140g) FB-966-C 

6.289 oz. (186mL) 2.83 x 5.63” (72 x 143mm) 84mm 70mm 62mm 0.584 lb. (265g) FB-966-D 

10.82 oz. (320mL) 3.62 x 6.3” (92 x 160mm) 105mm 90mm 82mm 0.9 lb. 410g) FB-966-F 

18.598 oz. (550mL) 4.4 x 7.68” (112 x 195mm) 125mm 110mm 91mm 1.466 lb. (665g) FB-966-G 

23.67 oz. (700mL) 5.04 x 7.95” (128 x 202mm) 142mm 110-124mm 89mm 1.984 lb. (900g) FB-966-H 

35.843 oz. (1060mL) 6.02 x 8.7” (153 x 221mm) 170mm 142-150mm 127mm 2.821 lb. (1280g) FB-966-J 

62.894 oz. (1860m) 7.36 x 10.63” (187 x 260mm) 210mm 185mm 161mm 4.85 lb. (2200g) FB-966-K 

152.16 oz. (4500mL) 13.78 x 13.78” (252 x 350mm) 280mm 240mm 209mm 9.25 lb. (4200g) FB-966-M 

Pk/6 

Capacity Top Outer Dia. x Height Wall Thickness Unit Weight Cat. No. 

0.04 oz. (1.3mL) 0.562 x 0.562” (15 x 15mm) 0.059” (1.5mm) 0.14 oz. (4g) FB-965-A 

0.169 oz. (5mL) 0.937 x 0.781” (24 x 20mm) 0.07” (1.8mm) 0.28 oz. (8g) FB-965-B 

0.338 oz. (10mL) 1.187” x 1” (31 x 26mm) 0.078” (2mm) 0.42 oz. (12g) FB-965-C 

0.50 oz. (15mL) 1.375 x 1.125” (35 x 29mm) 0.078” (2mm) 0.52 oz. (15g) FB-965-D 

1.01 oz. (30mL) 1.69 x 1.44” (43 x 37mm) 0.078” (2mm) 0.91 oz. (26g) FB-965-E 

1.35 oz. (40mL) 2 x 1.625” (50 x 40mm) 0.08” (2.1mm) 1.12 oz. (32g) FB-965-F 

1.69 oz. (50mL) 2.06 x 1.69” (53 x 43mm) 0.08” (2.1mm) 1.3 oz. (37g) FB-965-G 

3.38 oz. (100mL) 2.44 x 2.13” (65 x 54mm) 0.08” (2.1mm) 2.5 oz. (64g) FB-965-H 


17

GlaSSware 

Fisherbrand* Superfrost* Plus and ColorFrost* Plus 

Microscope Slides 

An ideal choice for frozen 

sections, cytocentrifuge 

preparations and standard 

Papanicolaou smears 

• Special treatment virtually eliminates 

tissue loss during staining; 

saves hours of slide preparation 

• Chemical-resistant white marking surface on Superfrost Plus slides and 

coloured marking surface on ColorFrost Plus slides for easy identification 

throughout procedures 

• Size: 75 x 25mm 


Superfrost Plus Slides 

White 12-550-15 

ColorFrost Plus Slides 

Blue 12-550-17 

Green 12-550-18 

Pink 12-550-19 

Yellow 12-550-20 

Lilac 12-550-16 

Fisherbrand* Superfrost* Disposable Microscope Slides 

Superfrost coating impervious 

to most common laboratory 

chemicals and reagents 

• Brilliant white, opaque coating 

takes and retains most laboratory 

marking methods 

• Each side has a written key 

for easy orientation; the word 

“SPECIMEN” instantly tells you which side is up 

• Slides can be imprinted with your laboratory or hospital’s name (call your 

Fisher Scientific Customer Service Representative for details) 

Size Thickness Cat. No. 

3 x 1” 1mm 12-550-123 

75 x 25mm 1mm 12-550-143 

Fisherbrand* Frosted Microscope Slides 

Clear, corrosion resistant 

• 75 × 25mm; approximately 1mm 

thick 

• Sandblasted frosted writing areas 

• Markings will not rub off or wash 

off in normal procedures 


Frosted at one end on one side 12-552-3 

Frosted at on end on two sides 12-552-5 

Fisherbrand* Cover Glasses 

Made of finest optical borosilicate 

glass, with uniform 

thickness and size 

• Corrosion-resistant 

• Precleaned, lint-free and ready 

to use 

• Available in squares and 

rectangles 

Size Quantity Cat. No. 

Squares No. 1 - 0.13 to 0.17mm thick 

18mm 232 12-542A 

22mm 156 12-542B 

25mm 125 12-542C 

Squares No. 1.5 - 0.16 to 0.19mm thick 

18mm 208 12-541A 

22mm 138 12-541B 

Squares No. 2 - 0.17 to 0.25mm thick 

18mm 176 12-504A 

22mm 116 12-540B 

25mm 93 12-540C 

Rectangles No. 1 - 0.13 to 0.17mm thick 

30 x 22mm 116 12-545A 

40 x 22mm 86 12-545C 

50 x 22mm 68 12-545E 

60 x 22mm 58 12-545J 

30 x 24mm 110 12-545B 

40 x 24mm 78 12-545D 

50 x 24mm 65 12-545F 

60 x 24mm 55 12-545M 

50 x 35mm 45 12-545G 

50 x 45mm 35 12-545H 

Fisherbrand* Plain Glass Microscope Slides 

Cost-effective slide for 

general-purpose applications 

• Plain white glass slide 

• Precision-ground edges on all four 

sides 

• Corrosion resistant 

• 1.0mm thick 

Size Cat. No. 

25 x 75mm 12-550-A3 

25 x 75mm 12-549-3 

75 x 38mm 12-550B 

75 x 50mm 12-550C 


Fisherfinest* Premium Cover Glasses 

The ultimate in purity and 

cleanliness for exacting 

work in histology, cytology, 

urinalysis and microbiology 

• Made of crystal-clear, pure waterwhite 

glass with uniform surface 

quality, precise squared edge, 

perfect flatness and exact 

dimensions 

• Precleaned and packaged to stay 

clean 

• Each glass is individually inspected and boxed in a molded plastic container 

for snugness and easy removal 

• No. 1 thickness range: 0.13 to 0.17mm 

Size Approx. Qty. per 1 oz. Pack Cat. No. 

22 x 22mm 156 12-548B 

24 x 50mm 65 12-548-5M 

24 x 60mm 55 12-548-5P 

Fisherbrand* Sterile Polystyrene Disposable 

Serological Pipets with Magnifier Stripe 

Designed for tissue culture work 

Sterile, nonwettable pipets offer a tolerance of ±2% at 

full volume and have plug-in mouth end. 

• Certified nonpyrogenic with an endotoxin level less than 

0.5EU/mL following USP XXII Bacterial Endotoxins Test (85). 

• Calibrated “To Deliver/Blow Out” 

• Black magnifier stripe runs lengthwise along pipet, making 

meniscus obvious at arm’s length — reducing reading errors 

• Pipets have improved optical clarity — high-contrast black 

markings make volumes easier to read 

• 5, 10, 25 and 50mL pipets have ascending and descending graduations; plus, 

improved tip design on 25 and 50mL pipets increases the effect of surface 

tension to minimize dripping 

• Colour coding on each pipet and on inner bags for multipack pipets make it 

easy to spot the size you need 

Capacity Colour Code Packaging Cat. No. 

1mL 

Yellow 

Yellow 

Individual, paper-plastic wrap 

Individual, all-purpose wrap 

13-678-11B 

13-676-10G 

2mL 

Green 

Green 


Individual, all-plastic wrap 

13-678-11C 

13-675-3C 

5mL 

Blue 

Blue 



13-678-11D 

13-676-10H 

10mL 

Orange 

Orange 



13-678-11E 

13-676-10J 

25mL 

Red 

Red 



13-678-11 

13-676-10K 

50mL 

Purple 

Purple 



13-678-11F 

13-676-10R 

Fisherbrand* Disposable Borosilicate Glass Tubes with 

Plain End 

Made of borosilicate glass to reduce pH changes and 

contaminants potentially leached from soda lime glass 

• Ideal for tissue culture and clinical chemistry 

• Packaged in shrink-wrapped trays of 250 or 125 to prevent contamination 

or breakage; 10 and 12mm O.D. sizes are suitable for cell 

washing procedures 

O.D. x L No. Per Tray Pk/ Cat. No. 

10 x 75mm 250 1000 14-961-25 

12 x 75mm 250 1000 14-961-26 

13 x 100mm 250 1000 14-961-27 

15 x 85mm 250 1000 14-961-28 

16 x 100mm 250 1000 14-961-29 

16 x 125mm 250 1000 14-961-30 

16 x 150mm 250 1000 14-961-31 

18 x 150mm 125 500 14-961-32 

20 x 150mm 250 500 14-961-33 

25 x 150mm 125 500 14-961-34 

Fisherbrand* Disposable Borosilicate Glass Pasteur Pipets 

Constriction near top 

prevents plugs from slipping 

into pipet body 

• High-quality borosilicate glass 

• Plugs not supplied 

• Tips held to close diameter tolerances 

• Square cut end 

Approx. Length Pk/ Cat. No. 

5.75” (146mm) 720 13-678-20A 

5.75” (146mm) 1440 13-678-20B 

9” (229mm) 720 13-678-20C 

9” (229mm) 1440 13-678-20D 

Fisherbrand* Disposable Cotton-Plugged Borosilicate-Glass 

Pasteur Pipets 

Made of N-51A borosilicate 

glass 

• Straight-cut tips and smooth, 

fire-polished tops to facilitate bulb attachment 

• A positive constriction at approximately 1” (2.5cm) from top holds supplied 

cotton plug in place, thereby reducing the chance of aspirating liquid into 

rubber bulb 

• Easel box, made of nonlinting material, folds to become a dispenser for easy 

access to pipets 

• Foam pad at bottom of box preserves tips 

Approx. Length Cat. No. 

5.75” (146mm) 13-678-8A 

9” (229mm) 13-678-8B 


Pk/250 

19

Fisherbrand* HDPE Round Bottles 

Rigid, translucent bottles 

• Leakproof 

• Higher temperature-use rating than LDPE 

— up to 120°C (248°F) for short periods 

and 110°C (230°F) for continuous use 

• Brittleness temperature at -100°C (-148°F) 

• Bottles may be radiation, EtO or chemically 

sterilized 

• Not autoclavable 

• With polypropylene screw caps 

Capacity Screw Cap Size Pkg/ Cat. No. 

1 oz. (30mL) 28mm 12 02-896-2A 

2 oz. (60mL) 28mm 12 02-896-2B 

4 oz. (125mL) 38mm 12 02-896-2C 

8 oz. (250mL) 43mm 12 02-896-2D 

16 oz. (500m 53mm 12 02-896-2E 

32 oz. (1000mL) 63mm 6 02-896-2F 

Fisherbrand* Colorrmark* Slide Cartridge for SHUR/Mark* 

Labeling Systems 

Background colour makes 

etched patient information 

more visible 

• Brightly coated with contrasting 

background colour 

• Self-contained packages ready for 

loading into your SHUR/Mark slide 

labeling system 

• Simply remove the cover from the 

slide package and drop the sleeve 

into the loading bin of the SHUR/Mark labeling system 


White 22-035-814 

Fisherbrand* UriSystem* DeciSlide* 10-Test Slide 

Reduces cross-contamination 

while standardizing volume 

per area 

• Acrylic slide with integrated coverslip 

• Recessed channels provide for 

excess specimen spillover 

• 0.005” depth-of-field between welded 

coverslip and slide provides a uniform 

monolayer and single focal plane 

viewing 

Pk/100 


10-test Urine Sedimentation 14-377-259 

Fisherbrand* Class B Clear Glass Threaded Vials 

with Closures Attached 

General-purpose vial 

• Made from Type I, Class B borosilicate glass 

• Attached black phenolic screw-top closures with 

polyvinyl-faced pulp liner 

• GPI thread finish 

Capacity O.D. x H GPI Thread Finish Cat. No. 

1 dr. (3.7mL) 15 x 45mm 13-425 03-338A 

1.5 dr. (5.5mL) 16 x 50mm 13-425 03-338B 

2 dr. (7.4mL) 17 x 60mm 15-425 03-338C 

3 dr. (11.1mL) 19 x 65mm 15-425 03-338D 

4 dr. (14.8mL) 21 x 70mm 18-400 03-338F 

4 dr. (14.8mL) 28 x 57mm 24-400 03-338E 

6 dr. (22.2mL) 23 x 85mm 20-400 03-338H 

6 dr. (22.2mL) 28 x 70mm 24-400 03-338G 

8 dr. (29.6mL) 25 x 95mm 22-400 03-338J 

9.5 dr. (35.1mL) 28 x 95mm 24-400 03-338K 

11 dr. (40.7mL) 28 x 108mm 24-400 03-338L 

Fisherbrand* Microhematocrit Capillary Tubes 

Low-taper wall construction guarantees error less than 1% 

absolute, 0.4 hematocrit, relative 

• Capacity: 70µL, 200 tubes per vial 

• Ends can be sealed by sealing clay or flame 

• Manufactured from low-taper, soft glass 

• Red band on tube indicates heparinization; 

blue band indicates nonheparinized tube 

• Interior surface of heparinized tubes is 

evenly coated with ammonium heparin (4 to 

7 USP units), which will not interfere with 

sodium determination 

• Length: 75mm ±0.02mm 

• Inner diameter: 1.1 to 1.2mm 

• Wall: 0.2mm ±0.02mm 

• Taper does not exceed 0.0254mm in 75mm 

• Available plain or heparinized with not less 

than 2 USP units of ammonium heparinate 

Pk/1000 

• Color-coded tube tips and labels 

• Packaged in Fisher Scientific* shaker-top vials for ease in dispensing 


Heparinized 22-362-566 

Plain 22-362-574 

Fisherbrand* Scintillation Vials 

High-density polyethylene vials with threaded cap 

• Translucent white vial with white lid 

• Capacity: 18mL 

• Made of HDPE to resist leaking and swelling caused 

by solvent degradation 

• Fit all common counters 

• Quick-Twist thread seals in one-half turn, 

no liner needed 

Pk/500 

Capacity Screw Cap Size Cat. No. 

18mL 5 Trays of 100 vials 14-955-392 

18mL Bulk pack of 500 14-955-393 


Fisherbrand* Reusable Glass Media Bottles with Cap 

Convenient wide opening 

• Enhanced graduations 

• Permanent white enamel marking spot 

• GL 45 screw thread 

• Clear (natural), drip-free, replaceable 

polypropylene pour ring 

• Linerless 

• Autoclavable (to 140°C) 

• Polypropylene cap 

Capacity Graduation Range Cat. No. 

100mL 20 to 80mL FB-800-100 

250mL 50 to 200mL FB-800-250 

500mL 100 to 400mL FB-800-500 

1000mL 100 to 900mL FB-800-1000 

2000mL 400 to 1800mL FB-800-2000 

5000mL 1000 to 4000mL FB-800-5000 

10,000mL 2000 to 8000mL FB-800-10000 

Replacement Cap ---- FB-800-STDCAP 

Fisherbrand* Reusable Glass Low-Form Griffin Beakers 

Slightly flared spout for steady, 

accurate pouring 

• Made of KG-33 borosilicate glass 

• Thick, heavy construction with beaded top 

• Uniform wall thickness 

• Durable, matte-finish marking area for use 

with an ordinary pencil 

• Easy-to-read white graduated double scale 

on all sizes from 50 to 1000mL 

COMPLIANCE: 

Designed from ASTM* Specification E 960, Type I requirements 

Capacity Graduation Range Graduation Interval Cat. No. 

50mL 10 to 40mL 10mL FB-100-50 

100mL 20 to 80mL 10mL FB-100-100 

150mL 20 to 140mL 20mL FB-100-150 

250mL 25 to 200mL 25mL FB-100-250 

400mL 50 to 325mL 25mL FB-100-400 

600mL 50 to 500mL 50mL FB-100-600 

1000mL 1000 to 1000mL 50mL FB-100-1000 

Fisherbrand* Reusable Glass Narrow-Mouth 

Erlenmeyer Flasks 

Useful in measuring and mixing solutions 

where a high degree of accuracy is not 

necessary 

Capacity Stopper No. Graduated Interval Cat. No. 

25mL 0 10 to 25mL FB-500-25 

50mL 1 20 to 50mL FB-500-50 

125mL 5 50 to 125mL FB-500-125 

250mL 6 50 to 225mL FB-500-250 

500mL 7 100 to 500mL FB-500-500 

1000mL 9 250 to 1000mL FB-500-1000 

2000mL 10 600 to 2000mL FB-500-2000 

4000mL 10 1000 to 4000mL FB-500-4000 

6000mL 10 1500 to 6000mL FB-500-6000 

plaStic 

Fisherbrand* Petri Dishes 

Polystyrene, radiation-sterilized dishes 

are easy to handle with just one hand 

Clear tops for distortion-free viewing 

• Radiation sterilized; sterile if sleeve is 

unopened 

• Top and bottom edges are squared off (not 

rounded) to provide a firm, sure grip 

• Bottom is flat so medium spreads evenly over 

the entire dish bottom 

• Three ventilation ribs allow free air circulation and reduce condensation 

during incubation 

• Lid skirt is flared just enough so that it can be replaced quickly after streaking 

• Place lid upside down on dish to close off dish from outside environment 

Raised-Ridge Petri Dishes 

• Stack high and remain stacked 

• Minimum of slipping, sliding and resulting scratches 

Beveled-Ridge Petri Dishes 

• Ideal for automated filling systems 

• Remove dishes easily from the center of a stack 

No-Ridge Petri Dishes 

• Ideal for use in automated systems 

Media-Miser* Dishes 

• Smaller size saves media 

• Raised, straight ridge for stacking 

Lid Type 

Outside Dia. x H 

No. per 

Sleeve Pk/ Cat. No. 

Raised Ridge, Stackable 100 x 15mm 25 500 08-757-12 

Beveled Ridge, Slippable 100 x 15mm 25 500 08-757-13 

No Ridge, Slippable 

Media-Miser Dishes 

150 x 15mm 10 100 08-757-14 

Raised Ridge, Stackable 60 x 15mm 20 500 08-757-13A 

Beveled Ridge, Slippable 95 x 15mm 25 500 08-757-14G 

Fisherbrand* Standard Disposable Transfer Pipets 

Single squeeze draws up to 3.2mL 

• Molded in one piece from see-through low-density polyethylene 

• Inert to biological fluids and most acids 

• Work well in hematology, urinalysis, chemistry, blood banking — 

anywhere there is a need for quick, safe transfer of fluids 

• One squeeze draws from 2.0 to 3.3mL (depending on style used) 

• All deliver repeatable drop sizes 

• Can be sealed and refrigerated for sample storage (seal with 02-678 

Hemato-Seal* Tube Sealant) 

• With or without graduations 

Type Length Capacity Pk/ Cat. No. 

Nongraduated, Nonsterile 5.88” (149.3mm) 7.7mL 500 13-711-7M 

Graduated (0.5mL) 6” (155mm) 7.5mL 500 13-711-9D 


21

Fisherbrand* Blood Bank Disposable Transfer Pipets 

Single squeeze draws up to 2.4mL 

• Capacity: approximately 5mL 

• Delivers 24 to 26 drops/mL 

• Molded in one piece from see-through low-density 

polyethylene 


• Work well in hematology, urinalysis, chemistry, blood 

banking — anywhere there is a need for quick, 

safe transfer of fluids 

• Can be sealed and refrigerated for sample storage 

(seal with 02-678 Hemato-Seal* Tube Sealant) 

Approx. Length Cat. No. 

5.75” (146mm) 13-711-5AM Approx. Length Cat. No. 

5.88” (149.3mm) 13-711-6M 

Fisherbrand* Disposable Graduated Transfer Pipets 

Sterile pipets are used 

for special applications in 

microbiology, bacteriology, 

research 

• Available gamma radiation-sterilized or nonsterile 

• With 0.25mL graduations 

• 5.8mL capacity 

• Draw 3.4mL per squeeze 



• Work well in hematology, urinalysis, chemistry, blood banking — anywhere 

there is a need for quick, safe transfer of fluids 




Approx. Length Inner Packaging Cat. No. 

Sterile 

6” (152.4mm) Individually wrapped 13-711-20 

6” (152.4mm) 10/Bag 13-711-9BM 

6” (152.4mm) 20/Bag 13-711-9CM 

Nonsterile 

6” (152.4mm) ---- 13-711-9AM 

Fisherbrand* Premium Microcentrifuge Tubes 

Pk/500 

Pk/500 

Fisherbrand* Narrow-Stem Disposable Transfer Pipet 

Capillary tip design is used for blood banking and blood sedimentation 

applications 

• Single squeeze draws up to 3.3mL 

• Capacity: approximately 4.6mL 

Pk/500 

• Drop size depends on technique used 



• Work well in hematology, urinalysis, chemistry, blood banking — anywhere 

there is a need for quick, safe transfer of fluids 




Fisherbrand* Redi-Tip* Pipet Tips 

Premium virgin polypropylene 

resin and advanced molding 

methods produce a superior, 

high-quality pipet tip 

Flat-top snap caps provide a safe, liquid-tight, reliable seal even with prolonged boiling 

• Choose from 0.5, 1.5 or 2.0mL tubes • Graduated: for 0.5mL tubes, 0.1mL markings; 1.5mL tubes, 0.1 and 0.25mL 

• Made of high-clarity polypropylene markings; 2.0mL tubes, 0.25mL markings 

• Withstand forces up to 30,000 x g • Highly polished interior for maximum sample recovery 

• Easy-open caps with needle insertion • Temperature range of -80° to +121°C 

spot and textured marking area • Fit all standard rotors 

• Labeling area on tube exterior • Nonpyrogenic 

• Autoclavable at 121°C/15psi for 15 minutes 

• Certified by independent laboratory 

• Nonsterile: RNase-, DNase-, DNA- and pyrogen-free 

• Sterile: RNase-, DNase-, DNA-, Bioburden-, PCR Inhibitor- and pyrogen-free 

Redi-Tip Reference Tips 

• Graduations at 10, 50 and 100µL; 10, 50, 100 and 200µL; or 250, 500 and 1000µL 

• Graduations allow for immediate volume verification 

Redi-Tip General-Purpose Tips 

• For use with most 200 and 1000µL single and multichannel pipetters 

• Hinged racks can be stacked rack-on-rack 

• Hinged closure on racks allows top lid to be partially open for steam penetration 

during autoclaving 

Volume 

Reference Tips 

Length Colour Packaging Cat. No. 

1-200µL 2” (50.8mm) Natural BP 1000 02-707-504 

General Purpose Tips 

1-200µL 2” (50.8mm) Yellow BP 1000 02-707-500 

1-200µL 2” (50.8mm) Yellow HR, 10 x 96 02-707-501 

1-200µL 2” (50.8mm) Yellow HRS, 10 x 96 02-707-502 

1-200µL 2” (50.8mm) Yellow RI, 5 x 96 02-707-503 

101-1000µL 2.75” (69.85mm) Blue BP 1000 02-707-507 

101-1000µL 2.75” (69.85mm) Blue HR, 10 x 100 02-707-508 

101-1000µL 2.75” (69.85mm) Blue HRS, 10 x 100 02-707-509 

101-1000µL 2.75” (69.85mm) Blue RI, 10 x 100 02-707-510 

101-1000µL 2.75” (69.85mm) Natural HR/T, 10 x 100 02-707-511 

Pk/500 

0.5mL Tubes 1.5mL Tubes 2.0mL Tubes 

Colour O.D. x L Cat. No. O.D. x L Cat. No. O.D. x L Cat. No. 

Natural 7.5 x 30.5mm 05-408-120 10.8 x 40.6mm 05-408-129 11 x 40.6mm 05-408-138 


Fisherbrand* Sterile Plastic Tubes 

Ideal for tissue culture 

procedures 

• Translucent polypropylene 

• Gamma-irradiated and tested for 

sterility; ready to use 

• No chance of residual contamination 

• All screw-cap tubes have outside threads and unconstricted necks, making 

filling and pipetting easier 

• All snap caps can be positioned for aerobic or anaerobic applications 

O.D. x L Cap Supplied Packaging Pk/ Cat. No. 

12 x 75mm None Blister pack of 125 1000 14-956-1B 

12 x 75mm Snap Individually wrapped 500 14-956-1C 

12 x 75mm Snap Blister pack of 25 500 14-956-1D 

17 x 100mm None Blister pack of 125 1000 14-956-1G 

17 x 100mm Snap Individually wrapped 500 14-956-1H 

17 x 100mm Snap Blister pack of 25 500 14-956-1J 

Fisherbrand* Disposable Cuvets 

Choice of polystyrene or methacrylate 

• Disposable 10mm pathlength cuvets designed 

for visible and UV/Vis assays 

• Choice of 4.5 and 1.5mL sample capacity 

• Clear four-sided cuvets are ideal for 

fluorimetry and nephelometry, as well as 

spectrophotometry 

• Scale down assay volumes and save 

on reagents by using semimicro cuvets 

with capacity to 1.5mL 

• Molded-in arrow indicates direction 

of transmission on standard and 

semimicro cuvets — helping assure uniformity 

• Each case contains cuvets with same mold 

impression number — assuring precision 

between samples — standard deviation is 

P±0.005 extinction units between cuvets 

• Outside L x W x H: 0.47 x 0.47 x 1.77” 

(12 x 12 x 45mm) 

Pk/500 

Cuvet Material Lightpath Capacity Cat. No. 

Standard 

Polystyrene 

Methacrylate 

10mm 

10mm 

4.5mL 

4.5mL 

14-955-125 

14-955-126 

Semimicro 

Polystyrene 

Methacrylate 

10mm 

10mm 

1.5mL 

1.5mL 

14-955-127 

14-955-128 

Four-Clear-Sided 

Polystyrene 

Methacrylate 

10mm 

10mm 

4.5mL 

4.5mL 

14-955-129 

14-955-130 

Fisherbrand* Micro Pipet Tips 

For use with micro volume pipetters 

• Natural colour 

• Precision molded for accuracy in low volume pipetting 

• Certified by independent laboratory — Nonsterile: RNase-, 

DNase-, DNA- and pyrogen-free; Sterile: RNase-, DNase-, DNA-, 

Bioburden-, PCR Inhibitor- and pyrogen-free 

• Bulk packed 

Volume Length Cat. No. 

0.1-10µL 1.25” (31.8mm) 21-277-2A 

Fisherbrand* PE Cone-Lined Plastic Caps 

Stress-crack resistant, black caps 

• Manufactured from LDPE 

Size Cat. No. 

33mm-400 02-912-062 

Fisherbrand* Loops 

No need to flame metal loops and 

expose to airborne pathogens 

• Disposable, sterile plastic loop for quantitative 

procedures such as sampling, serial 

dilutions and urine counts, as well as for 

bacterial inoculation 

• Molded from biologically inert polymer 

• Flexible enough to facilitate streaking, yet 

rigid enough to penetrate the media for subsurface inoculation 

• Gamma-irradiated for sterility 

• Colour-coded for easy identification 

Fisherbrand* Biohazard Specimen Transport Bags 

For light-duty use 

Pk/12 

Loop Type Inside Diameter Colour Packaging Cat. No. 

Flexible 10µL Loop 3.8mm Light Yellow 10/Pk. 22-363-597 

• Clear polyethylene with three-wall 

construction and large printed 

biohazard graphic 

• Attached document compartment 

with flap cover keeps paperwork in 

place 

• Reclosable zipper seal 


6 x 9” (15.2 x 23cm) 01-800-03 


23

Fisherbrand* Colour-Coded TainerTop* Safety Closures 

Colours correspond to 

Vacutainer* cap colours, 

ensuring easy identification 

• For 13mm culture tubes 

• Polyethylene 

• Information can be written directly 

on cap with indelible ink 

• Ensure integrity of serum samples 

after freezing or en route to reference labs 

• Don’t require precutting 

Pk/1000 

• Won’t pop or crack when frozen 

• Provide liquid-tight seal — will not aerosol when opened 

• Hold fast under most rigorous procedures including agitation, centrifugation, 

refrigeration and freezing 

• Flexible closures are not autoclavable 


White 14-376-69 

Red 14-376-70 

Lavender 14-376-71 

Green 14-376-72 

Blue 14-376-73 

Fisherbrand* Nonsterile Plastic Tubes 

Extra-heavy wall construction 

is ideal for numerous testing 

applications 

• Clear polystyrene; without cap 

• Round bottom 

• Special molding avoids leaks and cracks 

• 5mL capacity with heavier wall than competitive tubes 

O.D. x L Cat. No. 

12 x 75mm 14-961-10 

Fisherbrand* Externally and Internally Threaded Cryogenic Storage Vials 

Fisherbrand* Shaker Flasks 

Ideal for suspension cell culture, 

media preparation and storage 

• Nonpyrogenic and noncytotoxic 

• Autoclavable (flask and closure) 

• Clear, durable polycarbonate with 

molded-in graduations 

• Polypropylene closure with 0.22µm 

PTFE pore 

• Individually packed for easy storage 

and handling 

• Plain bottom for use on benchtop or 

baffled bottom for shaker table use 

• Vented or non-vented screw closure 

Choice of externally threaded vials with HDPE closures for aseptic technique, or internally 

threaded vials featuring polypropylene clo- Externally threaded 

sures with silicone gasket for tight seal • Conical-style bottom 

• Sterile; not autoclavable 

• High density polyethylene 

• Noncytotoxic, nonpyrogenic 

• Self-standing 

• Large white writing area 

Internally threaded 

• Graduations in 0.5mL increments 

• With silicone gasket 

• Use with Fisherbrand Colour Coders for easier sample • Polypropylene 


• Conical- or round-style bottoms with a star-style foot 

Note: Vials are for research use only; not for in vitro diagnosis or parenterals. Cryogenic 

vials are intended for placement only in the vapor phase of liquid nitrogen, and should not 

be used for storage in the liquid phase of liquid nitrogen. Immersion of the vials in the liquid 

phase could result in penetration of the liquefied gas into the vial, resulting in rapid vaporization 

of the liquid upon removal and possible violent explosion or leakage from the vial/ 

closure perimeter. To prevent cryogenic vials from exploding, never overfill liquid nitrogen 

storage units. Always examine vials before use to ensure no visible defects around the 

closure rims. Always use full faceshields, heavy safety gloves and laboratory protective 

apparel when removing vials from cryogenic storage. Always permit vials to warm slowly 

in a biological safety cabinet. Never reuse cryogenic vials. 


CE marked 

Capacity Quantity/Case Cat. No. 

Plain Bottom, Vented Closure 

4.22 oz. (125mL) 24 PBV125 

8.45oz. (250mL) 12 PBV250 

16.9 oz. (500mL) 12 PBV500 

33.8 oz. (1000mL) 6 PBV1000 

67.6 oz. (2000mL) 4 PBV2000 

94.6 oz. (2800mL) 4 PBV2800 

Plain Bottom, Non-vented Closure 

4.22 oz. (125mL) 24 PBNV125 

8.45 oz. (250mL) 12 PBNV250 

16.9 oz. (500mL) 12 PBNV500 

33.8 oz. (1000mL) 6 PBNV1000 

Baffled Bottom, Vented Closure 

4.22 oz. (125mL) 24 BBV125 

8.45 oz. (250mL) 12 BBV250 

16.9 oz. (500mL) 12 BBV500 

33.8 oz. (1000mL) 6 BBV1000 

67.6 oz. (2000mL) 4 BBV2000 

94.6 oz. (2800mL) 4 BBV2800 

Capacity Bottom Style Foot Style O.D. x H Pk/ Cat. No. 

Externally Threaded Vials 

1.2mL Conical ---- 13.5 x 38mm 100 10-500-25 

2.0mL Conical ---- 13.5 x 48mm 100 10-500-26 

5.0mL Conical ---- 13.5 x 92mm 50 10-500-27 

Internally Threaded Vials 

1.2mL Conical Star Foot 12.5 x 42mm 100 12-567-500 

2.0mL Round Star Foot 12.5 x 49mm 100 12-567-501 

5.0mL Round Star Foot 12.5 x 92mm 100 12-567-502 


Fisherbrand* Cell Lifter and Scrapers 

Disposable lifter quickly 

removes cell layers; scrapers 

easily harvest cells from 

tissue culture flasks 

Pk/100 

Cell Lifter 

• Used with dishes and cell culture clusters for quick 

removal of cell layers 

• One-piece design and chiseled blade provide improved control 

while minimizing damage during the cell removal process 

• Sterilized and individually wrapped in peel-open packaging 

• Polyethylene copolymer blade with angled and chiseled edge 

• Maintains even contact with growth area in culture dishes 

Cell Scrapers 

• Appropriate for a variety of cell culture vessels 

• Uniquely designed handle and blade reduce cell damage during the 

harvesting process 

• Presterilized and individually wrapped in peel-open packaging 

• Nonpyrogenic 

• Polyethylene copolymer blade pivots to permit even contact with growth 

surface 

• Ribbed polystyrene handle provides secure grip and added control 

• Flexible joint between blade and handle eases entry into vessel 

• Pivoting blade improves position control to adjust for difficult angles during 

cell harvesting 

Blade Handle 

Description Material 

Length Length Cat. No. 

Cell Lifter Polythylene 2.0cm 18cm 08-100-240 

Cell Scraper, Handle: Polystyrene; 1.8cm 25cm 08-100-241 

Small Blade: Polyethylene 

Cell Scraper, Handle: Polystyrene; 3.0cm 39cm 08-100-242 

Large Blade: Polyethylene 

Fisherbrand* Bags with Round-Wire Closure 

Secure, contaminant-free, 

pliant container ensures 

dependable analysis results 

• Made from heavy-gauge, virgin 

polyethylene, 25 mil thick 

• Can accommodate solid, semisolid 

and liquid materials 

• To use, simply tear off top and open 

bag using pull tabs 

• Insert sample and seal by twirling 

Pk/500 

the bag away from you four times 

and bending wire ends inward 

• Tape-on bag closure extends past the ends of internal support wires, 

covering them completely to reduce the risk of a protruding wire damaging 

surrounding bags 

• Available clear or with printed, write-on label 

Capacity W x L Style Cat. No. 

2 oz. (60mL) 3 x 5” (7.6 x 12.7cm) Clear 14-955-175 

2 oz. (60mL) 3 x 5” (7.6 x 12.7cm) Printed 14-955-182 

4 oz. (120mL) 3 x 7” (7.6 x 17.8cm) Clear 14-955-176 

4 oz. (120mL) 3 x 7” (7.6 x 17.8cm) Printed 14-955-183 

Fisherbrand* 96-Well Nonskirted PCR Plates 

Compatible with all 

0.2mL thermal cyclers and 

ABI PRISM* 

310, 3100 and 3700 

capillary sequencers 

• Virgin polypropylene 

• Clear well bottom for sample 

visibility 

• Highly rigid plate deck 

• Raised rim design 

• Sealable using adhesive films and foils, heat seals and cap strips 

• 300µL maximum volume when used with adhesive and heat seals 

• Cut-away corner and alphanumeric grid 

• Cleanroom produced 


Natural 14-230-232 


Pk/25 

25

Total Service Solutions 

• Fisher Scientific Service Centres 

are located across Canada 

• Flexible Service Agreements 

• Factory Trained Technicians 

• ISO/IEC 17025 Accredited 

Call 1-800-267-6633 

ONE SOURCE. INFINITE SOLUTIONS. 

©2011 Thermo Fisher Scientific Inc. All rights reserved. 

11_3683 JJ/AM-6/11 BN0617111C 

08/25/2011

Fisher Scientific Focus Products 2011

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?