Cirrus SR2x

FLIGHT MANAGEMENT
• Desired track up (DTK UP) aligns the top of the map display to the desired course.
• Heading up (HDG UP) aligns the top of the map display to the current aircraft heading.
NOTE: When panning or reviewing active flight plan legs in a non-North Up orientation, the map does not
show the map orientation nor the wind direction and speed.
NOTE: Map orientation can only be changed on the Navigation Map Page. All other displays (except the
PFD Inset Map) that show navigation data reflect the orientation selected for the Navigation Map Page. The
PFD Inset Map is always Heading Up (if heading is invalid, then track up).
Changing the Navigation Map orientation:
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
1) With the Navigation Map Page displayed, press the MENU Key. The cursor flashes on the ‘Map Setup’ option.
Figure 5-4 Navigation Map Page Menu Window
2) Press the ENT Key to display the Map Setup Window.
Map Setup
Selection
3) Turn the large FMS Knob, or press the ENT Key once, to select the ‘ORIENTATION’ field.
4) Turn the small FMS Knob to select the desired orientation.
5) Press the ENT Key to select the new orientation.
6) Press the FMS Knob to return to the base page.
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
Figure 5-5 Map Setup Menu Window - Map Group
Map Group Selection
Orientation Field
Auto North Up
- On/Off
- Minimum Range
ADDITIONAL
FEATURES
APPENDICES INDEX
190-00820-11 Rev. A Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 165