Cirrus SR2x

HAZARD AVOIDANCE
OPERATION
NOTE: The traffic unit automatically transitions from STANDBY to OPERATE mode eight seconds after
takeoff. The unit also automatically transitions from OPERATE to STANDBY mode 24 seconds after
landing.
After power-up, the traffic system is in Standby Mode. The traffic unit must be in Operating Mode for traffic
to be displayed and for TAs to be issued.
Pressing the OPERATE Softkey allows the system to switch from Standby Mode to Operating Mode as
necessary. Pressing the STANDBY Softkey forces the unit into Standby Mode.
Switching from operating mode to standby mode:
On the Traffic Page, press the STANDBY Softkey
Or:
1) Press the MENU Key and turn the small FMS knob to select ‘Standby Mode’.
2) Press the ENT Key.
Switching from standby mode to operating mode:
On the Traffic Page, press the OPERATE Softkey
Or:
1) Press the MENU Key and turn the small FMS knob to select ‘Operate Mode’.
2) Press the ENT Key. The traffic system switches from Standby Mode to Operating Mode as necessary.
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
190-00820-11 Rev. A Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 455