03.05.2016 Views

Cirrus SR2x

fV4OKB

fV4OKB

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

HAZARD AVOIDANCE<br />

SYSTEM<br />

OVERVIEW<br />

FLIGHT<br />

INSTRUMENTS<br />

EIS<br />

AUDIO PANEL<br />

& CNS<br />

FLIGHT<br />

MANAGEMENT<br />

HAZARD<br />

AVOIDANCE<br />

AFCS<br />

ADDITIONAL<br />

FEATURES<br />

APPENDICES<br />

Showing additional traffic information:<br />

1) Select the Traffic Map Page.<br />

2) Press the FMS Knob. A cyan bracket highlights the first selected traffic symbol. Additional information appears<br />

in a window in the upper-right corner of the Traffic Map Page.<br />

3) To select a different aircraft symbol, turn the FMS Knob to move the cyan bracket until the selected aircraft<br />

traffic symbol is highlighted.<br />

4) When finished, press the FMS Knob again to remove the cyan selection bracket.<br />

Traffic Map Page Display Range<br />

The display range on the Traffic Map Page can be changed at any time. Map range is adjustable with the<br />

Joystick, as indicated by the map range rings.<br />

Changing the display range on the Traffic Map Page:<br />

Turn the Joystick clockwise to increase the range of the traffic map, or counter-clockwise to decrease the range.<br />

ADDITIONAL TRAFFIC DISPLAYS<br />

The Map - Traffic Map Page is the principal map page for viewing traffic information. Traffic information<br />

can also be displayed on the following other maps for additional reference on the MFD when the traffic unit<br />

is operating:<br />

• Navigation Map Page<br />

• Nearest Pages<br />

• Trip Planning Page<br />

• Active Flight Plan Page<br />

Traffic information can also be displayed on the PFD when the Synthetic Vision Technology (SVT) option<br />

is installed and enabled. See the Additional Features Section for details.<br />

Displaying traffic information (MFD maps other than the Traffic Map Page):<br />

1) Press the MAP Softkey.<br />

2) Press the TRAFFIC Softkey. Traffic is now displayed on the map.<br />

When traffic is selected on maps other than the Traffic Map Page, a traffic icon is shown to indicate traffic<br />

is enabled for display (Figure 6-202).<br />

Displaying traffic on the Navigation Map<br />

1) Ensure the traffic system is operating. With the Navigation Map displayed, press the MAP Softkey.<br />

2) Press the TRAFFIC Softkey. Traffic is now displayed on the map as shown in Figure 6-202.<br />

INDEX<br />

490<br />

Pilot’s Guide for the <strong>Cirrus</strong> <strong>SR2x</strong> with <strong>Cirrus</strong> Perspective by Garmin<br />

190-00820-11 Rev. A

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!