Apex - Nicholson

AMERICAN PATTERN FILES
Mill Files - 1 and 2 Round Edges
• Round edges are used where rounding gullets are
preferred, as compared to sharp corners or squared gullets
• Rectangular shape
• Single-cut on sides and edges
• Bastard-cut
• Same as regular mill files except they have 1 or 2
round edges
Nicholson
One Round Edge
Two Round Edge
Length Type Cat. UPC Cat. UPC Wt. per doz. Shelf
Inch mm Packed Cut No. No. No. No. lb oz g Pack
8 200 Boxed Bastard 09099N 037103243232 09389N 037103243263 2 13 1276 12
10 250 Boxed Bastard 09179N 037103243249 09469N 037103243270 5 1 2296 12
12 300 Boxed Bastard 09227N 037103243256 - - 9 1 4111 6
Axe Sharpening File
• Ideal for sharpening axes and miscellaneous
garden tools
• Rectangular shape
• Double-cut on 1 side, single-cut on opposite
• 2 safe edges
• Length measured exclusive of handle
Length Cat. UPC Wt. per doz. Shelf
Inch mm Packed No. No. lb oz g Pack
8 200 Boxed 06704N 037103242907 5 12 2608 12
8 200 Carded 06706N 037103242914 5 12 2608 6
Square Files - Boxed
• Used on slots, keyways and general surface filing
• Square shape
• Double-cut
• Tapered slightly towards point
• Larger sizes frequently preferred to corresponding flat files
because of heavier section and 4 filing surfaces
• Boxed
Bastard Cut Second Cut Smooth Cut
Length Diameter Cat. UPC No. Cat. UPC No. Cat. UPC No. Wt. per doz. Shelf
Inch mm Inch mm No. 037103 No. 037103 No. 037103 lb oz g Pack
4 100 5⁄32 4 12790 127907 - - 12857 128577 0 4 113 12
6 150 1⁄4 6 12967 129673 13000N 130006 13033 130334 1 1 482 12
8 200 5⁄16 8 13081 130815 13114 131140 13147 131478 1 15 879 12
10 250 3⁄8 10 13196 131966 13229 132291 13262 132628 3 14 1758 12
12 300 1⁄2 13 13310 133106 13343 133434 13376 133762 8 6 3799 6
14 350 5⁄8 16 13425 134257 - - - - 14 12 6691 6
122