Proto - Douilles à choc

mcloutiermas

Impact Sockets

2 - 1/2" Drive Retaining Pin

> > Large drive size crush gauge retaining ring.

>

> Part numbers are embossed on the rings near the point at which the pin

and ring meet.

Product # Description For Groove Dia. (in) Diameter (in) Height (in) Weight (lbs)

JRP25000 Retaining Pin, 2-1/2" DR 2 4-1/2 1/2 0.21

#5 Spline Drive Impact Adapters - Male Square

> > Use adapters to help increase or decrease drive end size.

> > Do not use hand adapters with power tools.

> > Do not over torque small sockets when using them with adapters on

large drive tools.

7

#5 Spline Drive impact Sockets & Adapters

Overall

SPL

Product #

x INCH Length (in) Weight (lbs)

J09902 #5 SPL. F x 1" SQ. M 4-3/8 2.16

J09904 #5 SPL. F x 1-1/2" SQ. M 5 2.74

7

#5 Spline Drive Budd Wheel Deep Impact Socket

> > Proto ® 6 Point Impact Sockets are ideal for use on stubborn or damaged

fasteners, and also on fasteners made from soft materials.

L

>

>

B

A

>

D

E

C

Nut End Outside Drive End Outside

Overall

INCH 6

Diameter (in) (B) Diameter (in) (C) Length (in) (L)

Weight (lbs)

1-1/2 J09924-LS 2-3/8 2-3/8 4-3/16 3.10

4 4 POINT 6 6 POINT 8 8 POINT 12 12 POINT SPL SPLINE TORX ®

> Radius-corner socket design

> Engages flats for better grip

> Improves the ability to turn

worn or rounded fasteners

WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES. 551

+1.800.800.TOOL · Fax: +1.770.648.9108​ · www.protoindustrial.com

7

More magazines by this user
Similar magazines