Proto - Douilles à choc

mcloutiermas

Impact Sockets

About Power SOckets

VERY DIFFERENT SOCKETS FOR VERY DIFFERENT PURPOSES

Power sockets are designed for power nut runners,

multi-spindle machines and angle head nut drivers,

which are low impact power tools. Even though

the power sockets are offered in a black finish,

they are not compatible with impact tools.

1/4" Drive High Strength Magnetic Power Sockets - 6 Point

> > ProtoGrip Magnetic Sockets use high strength magnets made from a rare

earth magnet alloy/nylon blend.

> > ProtoGrip Magnetic Sockets require no bushings to hold the magnet

in place. Allows room for more magnet material, helping increase total

magnetic strength.

> > Designed to easily pick up heavy fasteners and hold them tightly during use.

> > Strong magnetic hold helps increase efficiency when installing fasteners in

awkward or hard-to-reach locations.

> > Size stamped on tool for easy identification.

Power sockets are heat-treated to a higher

hardness than either impact or hand sockets. This

high hardness is ideal for long wear on assembly

lines, but their brittleness makes them vulnerable

to shattering when fitted to an impact wrench.

L

B

A

D

E

1/4" Drive Power Sockets

C

Nut End Outside Drive End Outside Nut Depth

Overall

INCH 6

Diameter (in) (B) Diameter (in) (C) (in) (D) Length (in) (L) Weight (lbs)

3/16 J6906PF 5/16 1/2 5/32 7/8 0.03

1/4 J6908PF 25/64 1/2 11/64 7/8 0.03

5/16 J6910PF 1/2 1/2 13/64 15/16 0.04

11/32 J6911PF 33/64 33/64 7/32 15/16 0.04

3/8 J6912PF 9/16 9/16 15/64 15/16 0.05

7/16 J6914PF 21/32 21/32 1/4 1 0.07

1/2 J6916PF 11/16 11/16 1/4 1 0.08

7 ASME B107.2

Nut End Outside Drive End Outside Nut Depth

Overall

MM 6

Diameter (in) (B) Diameter (in) (C) (in) (D) Length (in) (L) Weight (lbs)

5 J6905MPF 5/16 1/2 5/32 7/8 0.03

5.5 J69055MPF 23/64 1/2 5/32 7/8 0.03

6 J6906MPF 25/64 1/2 11/64 7/8 0.03

7 J6907MPF 7/16 1/2 11/64 15/16 0.04

8 J6908MPF 1/2 1/2 11/64 15/16 0.04

9 J6909MPF 33/64 33/64 13/64 15/16 0.04

10 J6910MPF 9/16 9/16 7/32 15/16 0.05

11 J6911MPF 5/8 5/8 17/64 1 0.06

12 J6912MPF 11/16 11/16 9/32 1 0.08

13 J6913MPF 47/64 47/64 19/64 1 0.09

7 ASME B107.33M

Locking Adapter (Male to Male)

Product #: J4759BL

Overall

Product # Drive Size (in) Finish Length (in) Weight (lbs)

J4759BL 1/4 Black Oxide 2-1/2 0.07

7

4 4 POINT 6 6 POINT 8 8 POINT 12 12 POINT SPL SPLINE TORX ®

Torx ® hex HEX

BLACK OXIDE

WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES. 555

+1.800.800.TOOL · Fax: +1.770.648.9108​ · www.protoindustrial.com

More magazines by this user
Similar magazines