The Fuel injections system is a vital mechanism in engine of vehicles to ensure proper flow of fuel through the engine. The performance of engine is heavily dependent on performance and reliability offered by Fuel injection system. Automobile, defence & military, mining industries and aviation are key end-users of Fuel injection systems. The fuel injection systems not only maintains health of the engine but also reduces carbon emission and improves economy of fuel usage. In order to cater to demand for technologically advanced fuel injection system for automotive, the majority of players in fuel injection system market are focusing on research & development.
Increasing development in the construction industry along with complying strict building requirements by governments is boosting the growth in demand for Heat Pumps market. It is a device used to transfer heat from one place to another. Depending upon the climatic condition, it transfers heat from outdoors into building and vice-versa during hot weather. Various heat pump application includes, sanitary hot water heating, space cooling, dehumidification, heat recovery and space heating. Owing to its high operating efficiency andlower maintenance cost, it acts as an eco-friendly substitute for cooling and heating residential, commercial and industrial buildings. On the other hand, CO2 heat pumps have witnessed a significant rise in commercial and residential sector due to its ozone and climate friendly feature.
Increasing development in the construction industry along with complying strict building requirements by governments is boosting the growth in demand for Heat Pumps market. It is a device used to transfer heat from one place to another.
Submersible pump is a submerged device which is required to extract water and other fluids from the bored hole or well. Submersible pump is a centrifugal pump which is usually coupled with an electric motor. These pumps remain submerged in water due to which there will not be any pressure trouble. The main reason of using these pumps is to avoid cavitation. Cavitation is a problem related with the high elevation distance between fluid surfaces and pumps. Unlike other pumps, submersible pumps pushes water to the surface instead of sucking of water out of the ground like above ground water pumps.
Polydimethylsiloxane (PDMS) is an inert, nonflammable and nontoxic silicon based organic polymer. Generally it is referred as dimethicone. Polydimethylsiloxane is optically clear and viscous substance. The properties such as water repellency, low surface tension, low vapor pressure, oxidation resistance, anti-foaming, heat, resistance, heat stability, good dielectric properties and others makes PDMS a very useful substance in various industrial applications. These diverse set of properties of Polydimethylsiloxane are used in medicines, cosmetics, hydraulic fluids, surfactants, anti-foaming agents, coating, domestic products and others.
Industrial pumps find application in various industries and play an essential role in moving an assortment of fluids from one location to another. Industrial pumps come in a variety of shapes, sizes and capacities. Industrial pumps are broadly segmented as centrifugal pumps (also called roto-dynamic pumps) and positive displacement pumps. Centrifugal pumps comprise axial, mixed-flow and radial types. Positive displacement pumps include piston, screw, sliding vane and rotary lobe types. Conformance to performance standards and reliability of these pumps is very crucial. For instance, pump failure in a cooling system can result in overheating and substantial damage to equipment.
Breast pumps refer to the mechanical device that helps to draw milk from the women’s breast by suction. These devices are regulated by the U.S. Food and Drug Administration. Breast pump are the supplement of the breastfeeding and operated technologies such as electric, battery powered and manual.
Automotive pumps, improving the efficiency are the essential part of a vehicle. Automotive pumps when invented were used as a component to transfers fluid, now are used to improve fuel efficiency and performance of vehicles. Growing demand of environmental friendly solutions influence manufacturers to develop better pumps. It is used in various system of a vehicle such as, lubrication system, steering system, coolant system, transmission system and fuel system.
Explosion is defined as an extreme increased in the energy of a system, which can be nuclear, mechanical or nuclear in an uncontrolled amount result in increasing in temperature and evacuation of gases. There are so many sources responsible for the explosions, some of them are increased pressure, nuclear reactions, leakage of gases, dust and others. In order to prevent these explosions, several types of prevention measures are being taken in to account at a time of designing products for electrical, mechanical, nuclear and chemical use and these devices/products are termed as explosion proof.
The increasing population have augmented the energy requirements of the country. In order to cope with energy demands more Oil and Gas E&P initiatives are being taken to cover the household and industrial energy requirement. With the products of oil industries & Gas manufacturing process fuelling various different industries from chemical to cosmetic hence it is necessary to use ensure that only quality product with minimum wastage is available . In order to ensure easy extraction, production a rich and refined product we use oilfield chemicals. With the use of Oilfields chemicals ensure an increase in efficiency oilfield activities such as drilling, completion, production, cementing and enhanced oil recovery (EOR).
Water softeners are those equipment’s used to purify and treat hard water. Water softeners operate on an ion exchange systems which includes the exchange of hardness ions (magnesium and calcium) with sodium and potassium ions. The water softening process takes place in the resin tank of the water softening system. This water softening is done to increase water’s compatibility with soap and plumbing hardware. Water softening systems are deployed in each and every field be it industry or domestic. Industrial uses include boiler feed, cooling towers, air conditioners, pharmaceutical industries, food processing, hospitals, hotels, laundries, textile etc. whereas domestic uses include drinking water, soap soluble water etc.
Electrophoresis is a method used for separating molecules in research and clinical laboratories. Depending upon their electrical charge and size an electric current is passed through a medium that contains the mixture of molecules. Separation of the molecules takes place according to the kind of molecule, it size and electrical charge.