Lincoln

julianlittleuk

O6Wj302PUgW

CI/SfB

March 2016

(47) Ng2

Lincoln

Clay pantiles


Lincoln clay pantiles

Lincoln combines the bold and beautiful curves

of traditional clay pantiles with all the installation

simplicity and speed required for today’s roofs.

This means that Lincoln affords the rich appeal of

natural, clay pantiled roofs, a thin leading edge and

a beauty that matures over time.

As well as quick and easy installation, Lincoln can

be installed to meet the latest fixing requirements

of BS 5534 and the NHBC technical standards,

without compromising tradition.

Lincoln pantiles are available with a comprehensive range of clay

fittings and accessories to give a traditional finish. Additionally,

many of these components can be combined with our Universal

range of accessories and fittings to offer a complete dry fix and

maintenance-free solution.

All factories certified to

ISO 9001, ISO 14001

2 Lincoln clay pantiles

For advice, literature and samples Tel 01283 722588 or visit marleyeternit.co.uk 3


Lincoln Rustic Red

Semi-sanded finish

Lincoln Natural Red

Smooth finish

4 Lincoln clay pantiles

For advice, literature and samples Tel 01283 722588 or visit marleyeternit.co.uk 5


Tile features and technical data

Lincoln key features

> traditional profile

> easy to install (open-gauge design)

> low minimum pitch 17.5°

> BS 5534 compatible

Key

A

Raised and protected blind nail hole

370

E

A

B

247

D

Key

K

L

M

N

SoloFix clip ‘pocket’ for a flush fit

Batten locator to avoid rocking

Deep nibs for ease of setting out and fixing

Double anti-capillary bars to prevent

water ingress

L

M

B

C

D

E

F

G

H

Raised and protected head and side locks

SoloFix clip recess

Extended weather bars over the roll

for low pitch protection

Wide channel for water run-off

Raised ridge to guard against

wind-driven rain

Open-gauge design

for a flexible fit

Traditional s-curve

profile

C

F

H

G

Technical data

Size of tile

370 x 247mm

Minimum pitch* 17.5° (120mm headlap)

22.5° (75mm headlap)

Maximum pitch 70°

Minimum headlap 75mm

Maximum gauge 295mm

Cover width 222mm (nominal)

Covering capacity 15.3 tiles/m 2 at 75mm headlap

(net)

18.0 tiles/m 2 at 120mm headlap

Weight of tiling 43.0 kg/m 2 at 75mm headlap

(approx.)

50.4 kg/m 2 at 120mm headlap

Battens required 3.4 lin.m/m 2 at 75mm headlap (net)

(net)

4.0 lin.m/m 2 at 120mm headlap (net)

K

N

I

J

Thin leading edge

Hidden/cloaked

interlock

I

J

Batten size

38 x 25mm for rafters/supports

recommended not exceeding 450mm centres

(fixed to BS 5534) 50 x 25mm for rafters/supports

not exceeding 600mm centres

Tile nails

38 x 3.35mm

Fixing clips

Eaves, verge and tile clips

Authority BS EN 1304

* The minimum recommended pitch and lap may be

influenced by special circumstances, please contact

the Technical Advisory Service.

The Lincoln clay pantile features

a completely open-gauge design,

making it quick and easy to install.

For full technical data and advice, please contact our Technical Advisory Service on 01283 722588

6 Lincoln clay pantiles

For advice, literature and samples Tel 01283 722588 or visit marleyeternit.co.uk 7


Lincoln

clay fittings and accessories

Dry fix ventilation and accessories

The following products and accessories can be used with Lincoln clay fittings. Our website also contains

further information about dry fix and ventilation solutions: www.marleyeternit.co.uk/dryfix

Note: Minimum and maximum pitches may vary – please contact our Technical Advisory Service for more information.

120

120

270

Half round ridge tile

375

270

Half round ridge end tile

385

Universal eaves vent system

• Universal 10mm eaves vent system (6m)

• Universal 25mm eaves vent system (6m)

• Comb filler strip

• Continuous rafter roll (2 x 6 m)

• Gutter spacers (20 per pack)

Universal RidgeFast system

• Universal RidgeFast system (6m)

• RidgeFast blanking tape (2 x 2 m)

• RidgeFast/HipFast union pack

(6 No. unions)

Universal HipFast system

• Universal HipFast system (6m)

• Universal HipFast support tray (6m)

• RidgeFast/HipFast union pack

(6 No. unions)

80

80

240

375

240

385

Third round hip tile

Third round hip end tile

Universal GRP dry valley

Top abutment ventilation system

• High profile GRP valley trough (3m)

• Accommodates up to 20° pitch difference

either side of valley

• Suitable on rafter pitches from 17.5° to 60°

• Lead support strip (1.5m)

• Dry ridge batten section (3m)

• Dry ridge batten section (3m)

Lincoln filler unit vented

370

370

Security fixing

Mortar bedded security ridge and hip fixing

kits are available to meet the latest British

Standards and NHBC guidelines.

Left hand verge tile

247

Ventilation tile

247

Note: Minimum and maximum pitches may vary –

please contact our Technical Advisory Service for

more information.

Mortar bedded security ridge

Mortar bedded security hip

150

90

• Mortar bedded security ridge kit

• Watch a quick video on mortar

bedded security fixing at

marleyeternit.co.uk/securityridge

or scan the QR code shown

• Mortar bedded security hip kit

• Watch a quick video on mortar

bedded security fixing at

marleyeternit.co.uk/securityhip

or scan the QR code shown

Dentil slip

8 Lincoln clay pantiles

All dimensions in mm.

For advice, literature and samples Tel 01283 722588 or visit marleyeternit.co.uk 9


Lincoln

Design detailing

Bedded verges

> ensure undercloak does not tilt towards gable

> verge overhang should be a maximum of 50mm

> use Lincoln left hand verge tile for left hand verges

> mechanically fix all verge tiles in accordance with BS 5534

Universal eaves ventilation

> eaves ventilation to satisfy 10mm or 25mm

conditions

> eaves to ridge ventilation for pitches of

17.5°-70°

> continuous rafter roll compresses insulation

to allow free air passage (use two rolls to

compress deep insulation)

> strip ventilator has discreet ventilation grille

and is nailed to fascia or timber fillet

Lincoln left hand verge tile

Lincoln verge clip

Mortar bedding

Fibre cement undercloak

Lincoln clay pantile

Tiling batten

Tiling batten

Lincoln clay pantile

Lincoln verge clip

Mortar bedding

Fibre cement undercloak

> suitable with or without soffit board

Underlay

Underlay

> use comb filler strip with deep profiled tiles

> mechanically fix all tiles at eaves

Continuous rafter

roll (2 No.)

Lincoln clay pantile

Tiling fillet

Universal HipFast system

> provides additional ventilation to the roof void when a 5mm gap

in the underlay is used in conjunction with either eaves or ridge

ventilated systems or ventilation tiles

> use one or two thicknesses of 50mm x 25mm batten to fit batten

brackets

> use hip end hip tile at eaves

Mortar bedded hips

> maximum rafter pitch 45°

> fix hip units to hip tree using ridge clamp

and 100mm stainless steel screw

> complete hip at ridge apex

with three way mitre

> mechanically fix each hip tile via hip unions and clamps

> complete hip at ridge with soaker flashing

10/25mm over fascia

strip ventilator

Ridge union clamp

Third round hip tile

Ridge union

Maximum gauge 295mm

Ridge roll flashing

Lincoln clay pantile

Ridge batten bracket

Hip batten brackets

For more information on security hip

fixing kits, including installation videos,

you can scan the QR code or visit:

marleyeternit.co.uk/securityhip

10 Lincoln clay pantiles

For advice, literature and samples Tel 01283 722588 or visit marleyeternit.co.uk 11


Design detailing

Ridge union clamp

Half round ridge tile

Ridge union

Ridge roll flashing

Ridge batten bracket

Universal GRP dry valley

> minimum rafter pitch 17.5°, maximum 60°

> maximum valley length 8m

> suitable for all plan angles and where the pitch either side of the

valley varies by a maximum of 20°

> provide continuous support for valley trough using 19mm timber

ply boards inset between rafters or 6mm continuous ply boards

laid over rafters

> tightly butt tiles or slates to central upstand of valley units to

prevent ingress of birds or vermin

> provide metal apron at foot of valley and dress into gutter at

eaves. For rafter pitches below 25° cut fascia board to maintain

valley pitch

Battens at max 295mm gauge

Tiling batten

High profile dry valley trough

19mm (min) timber valley board

Lincoln clay pantiles cut to angle of valley

Underlay

Rafter

Lincoln clay pantile

Universal RidgeFast system

> provides 5,000mm 2/ m free vent area at ridge apex

> ensure gap is provided in roof underlay to vent roof void

> use one or two thicknesses of 50mm x 25mm batten to fit

batten brackets

> mechanically fix all top course tiles

> use ridge end tile

Lincoln clay pantile

Underlay cut to

provide insulation

> nail or clip adjacent tiles to the valley

> complete top of valley with a lead saddle

Mortar bedded ridges

> security ridge fixing kits are available for Lincoln clay ridges

> maximum rafter pitch 50°

> fix ridge units to ridge batten using ridge clamp and 100mm

stainless steel screw

> mechanically fixes ridge tile in line with BS 5534 fixing guidelines

For more information on security ridge

fixing kits, including installation videos,

you can scan the QR code or visit:

marleyeternit.co.uk/securityridge

12 Lincoln clay pantiles

For advice, literature and samples Tel 01283 722588 or visit marleyeternit.co.uk 13


Design detailing

Resources

Abutment

> maximum rafter pitch 45° (55° using steep pitch batten section)

> provides 5,000mm 2 /lin.m ventilation

> ensure air passage from roof void is not obstructed

> mechanically fix all top course tiles

> use minimum 1.5m length of lead flashing with 150mm side laps

Code 4 lead

Lead support strip

Dry ridge

batten section

Lincoln ventilated

filler unit

Lincoln clay pantile

Underlay cut back

5mm min. to provide

ventilation

Min.

75mm

Technical advice

Our Technical Advisory Service is staffed by

a qualified team with specialist knowledge.

Call 01283 722588 or

e-mail info@marleyeternit.co.uk

Fixing instructions and literature

Comprehensive sitework, fixing and installation

literature and videos:

marleyeternit.co.uk/resources

All current product and technical literature can be

downloaded: marleyeternit.co.uk/downloads

Sales support

Our Area Sales Managers have in-depth knowledge of

your local area. They are available to visit your site to

carry out a roof survey, and to offer specific solutions

for both new build and refurbishment projects.

marleyeternit.co.uk/localcontacts

Tilefix

To request a fixing specification based on the

geographical location and building dimensions

of specific building projects.

Call 01283 722588 or

e-mail info@marleyeternit.co.uk

Underlay

Batten

Samples

Samples of clay interlocking and plain tiles,

fibre cement slates and concrete tiles are available

on request.

Tel 01283 722588

marleyeternit.co.uk/samples

Estimator

To request a complete bill of materials for your

roofing project:

Call 01283 722588 or

e-mail info@marleyeternit.co.uk

Lincoln clay tile vent

Lincoln clay pantile

50mm air gap

maintained over

insulation

Battens at max. 295mm gauge

Nailed fixing to back of batten

‘V’ cut in felt with flap nailed to batten

Lincoln clay tile vent

> locate clear of rafters

> use spigot-soaker tray to weather the offset hole in underlay

> locate at 1.3-1.5m centres for 5,000mm 2 /lin.m ventilation

and 565-765mm centres for 10,000mm 2 /lin.m ventilation

Stockist information

To find details for stockists of Marley Eternit

products, visit:

marleyeternit.co.uk/stockists

Customer services

Knowledgeable and friendly staff are available

to offer quotations, expert advice, deal with

orders and all other enquiries.

Call 08705 626400 or

e-mail info@marleyeternit.co.uk

Training centre

We have a purpose-built training centre where we

are able to impart our expertise through a range of

practical and classroom courses. To find out more

about our courses, visit:

marleyeternit.co.uk/training

Health and Safety

In line with the requirements of the Health and Safety

at Work Act, The Consumer Protection Act and The

Chemicals (Hazard Information and Packaging for

Supply) Regulations and the Control of Substances

Hazardous to Health Regulations, please download

and view copies of our COSHH data sheets

at marleyeternit.co.uk/coshh

Underlay

14 Lincoln clay pantiles

For advice, literature and samples Tel 01283 722588 or visit marleyeternit.co.uk 15


Call 01283 722588

Email

info@marleyeternit.co.uk

Or visit

www.marleyeternit.co.uk

Marley Eternit Lichfield Road Branston Burton upon Trent DE14 3HD

Similar magazines