WNIP JUL AUG 19.4 Digital

1
19.2
3
On the Cover...
19.4
Ultra compact infrared
camera for the metal industry
100
95
75
25
OptrisPI-1M_WNIPCover_Rev1-0
29 July 2016 02:50:08 PM
WNIP JUL AUG 19.4.indd 1
Volume 19.4
Editor
Debbie Scott
debbiewnip@mweb.co.za
Graphic Designer /Sub-editor
Melissa Scheepers
melzdesignz1@gmail.com
Advertising Sales Manager
Roxanne Bredenkamp
roxannewnip@mweb.co.za
Published by
What’s New in Publishing cc
ck 2000/077679/27
PO Box 2214
Primrose 1416
South Africa
5
0
2016/08/01 11:36 AM
Optris, specialists in non-contact
temperature measurement, have
launched the new OPTRIS PI 1M IR
camera, especially suited to measuring
the temperature of metals, as these
exhibit a distinctly higher emissivity at the
short measurement wavelength of 1μm
than at measurements in the previously
conventional wavelength range of 8 – 14
μm.
The advantage of temperature
measurements with the new infrared
camera lies in the large amount of
information in an IR picture/IR video and
the short reaction time of 1ms for the
output of temperature information of
freely selectable individual pixels.
The use of these new image sensors
allows a large dynamic range for
temperature measurement so that the
previously necessary use of relatively
many and narrowly defined sub-ranges is
no longer required. Intelligent measuring
with a pyrometer is now possible thanks
to the two-dimensional temperature
recording of the Optris PI 1M.
With the large measurement
temperature range of 450 – 1800 °C, that
Optris PI 1M IR camera offers, it satisfies
practically all demands in the fields of
metal production and processing.
Pertinent features of the Optris PI 1M IR
camera:
- Highly flexible CMOS detector
with an optical resolution of up to 764 x 480
pixels
- Very large temperature
measurement range (without sub-ranges)
of 450 °C to 1800 °C
- Frame rates of up to 1 kHz for fast
processes
- Real-time output of middle pixel
at a set-up time of 1 ms
- Includes license-free analysis
software and full SDK
For more information on the Optris PI
1M, for application in the metal industry,
contact the Instrotech Sales Team
Tel: 010 595 1871
sales@instrotech.co.za
Tel: 0861 PROCES (776 237)
Fax: 086 723 5321
Printed by: Raptor Print
Views expressed in this publication do not
necessarily reflect the opinions of the publisher.
Copyright reserved on all material
PORT ELIZABETH - 30 AUGUST 2016
VANDERBIJLPARK - 27 OCTOBER 2016
FREE ENTRANCE!
To book a stand
contact Roxanne
roxannewnip@mweb.co.za
or 0861 776 237
See You There!
Register online: www.whatsnewinprocessing.co.za