Why We Use Pre-terminated Cabling System in Data Center
Pre-terminated cabling system, which can accelerate the installation process, reduce costs and errors, is introduced to the data center.
Pre-terminated cabling system, which can accelerate the installation process, reduce costs and errors, is introduced to the data center.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
WHITE PAPER<br />
make connections, test<strong>in</strong>g and troubleshoot<strong>in</strong>g dur<strong>in</strong>g the deployment of cabl<strong>in</strong>g <strong>in</strong> data center. The<br />
use of pre-<strong>term<strong>in</strong>ated</strong> cabl<strong>in</strong>g system simplifies the entire manpower plann<strong>in</strong>g process. As all the<br />
connections are pre-<strong>term<strong>in</strong>ated</strong>, the need for labor to make term<strong>in</strong>ations on site will be mitigated.<br />
And fewer labor means more sav<strong>in</strong>gs on the labor bill.<br />
• Reduc<strong>in</strong>g Space and Material Wast<strong>in</strong>g<br />
Traditional cabl<strong>in</strong>g <strong>in</strong>stallations require loose components and tools to be brought to site. So much<br />
space will be needed to store these components and eng<strong>in</strong>eers also need work area to make<br />
term<strong>in</strong>ation. However, with pre-<strong>term<strong>in</strong>ated</strong> cabl<strong>in</strong>g solutions, the wastage of space can be reduced,<br />
s<strong>in</strong>ce the pre-<strong>term<strong>in</strong>ated</strong> l<strong>in</strong>ks are “made to measure” and if they are delivered to site at<br />
appropriate time, they can be used immediately without be<strong>in</strong>g stored. Additionally, some<br />
manufacturers have developed recyclable reels for pre-<strong>term<strong>in</strong>ated</strong> l<strong>in</strong>ks <strong>in</strong> the effort to m<strong>in</strong>imize the<br />
material wastage.<br />
Choices for <strong>Pre</strong>-<strong>term<strong>in</strong>ated</strong> <strong>Cabl<strong>in</strong>g</strong> Assemblies<br />
With all the advantages listed above, there is no doubt that pre-<strong>term<strong>in</strong>ated</strong> cabl<strong>in</strong>g system is an<br />
ideal solution for data center and other applications where speed of <strong>in</strong>stallation is important. The<br />
follow<strong>in</strong>g part will further <strong>in</strong>troduce some commonly deployed pre-<strong>term<strong>in</strong>ated</strong> cabl<strong>in</strong>g assemblies.<br />
• Fiber Patch Cable<br />
Divided by different connector type, core diameter and fiber cable structure, there are a wide range<br />
of fiber patch cables, such as LC fiber cables, s<strong>in</strong>gle-mode patch cables and duplex patch cables and<br />
so on. Fiber patch cable helps to ensure a reliable temporary fiber optic <strong>in</strong>terconnection, mak<strong>in</strong>g it<br />
become the most commonly used pre-<strong>term<strong>in</strong>ated</strong> fiber cable <strong>in</strong> data center. The figure1 shows a LC<br />
LC fiber cable.<br />
Figure 1. LC LC Fiber Cable<br />
FS.COM White Paper | <strong>Why</strong> <strong>We</strong> <strong>Use</strong> <strong>Pre</strong>-<strong>term<strong>in</strong>ated</strong> <strong>Cabl<strong>in</strong>g</strong> <strong>System</strong> <strong>in</strong> <strong>Data</strong> <strong>Center</strong>?