EN-RM 014_GB.pdf - Richard Mille
EN-RM 014_GB.pdf - Richard Mille
EN-RM 014_GB.pdf - Richard Mille
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CALIBER <strong>RM</strong> <strong>014</strong><br />
OTHER FEATURES<br />
MOVEM<strong>EN</strong>T DIM<strong>EN</strong>SIONS: 30.20 x 28.60 mm<br />
THICKNESS: 6.35 mm<br />
TOURBILLON DIAMETER: 12.30 mm<br />
BALANCE WHEEL DIAMETER: 10 mm<br />
NUMBER OF JEWELS: 23<br />
BALANCE: GLUCYDUR, 2 arms, 18 setting screws, inertia moment 10 mg cm 2 , angle of lift 53º<br />
FREQU<strong>EN</strong>CY: 21,600 vph (3 Hz)<br />
BALANCE SPRING: ELINVAR by NIVAROX<br />
TORQUE INDICATOR with reference measurement in dNmm<br />
SHOCK PROTECTION: KIF ELASTOR KE 160 B28<br />
JEWELS SET IN WHITE GOLD CHATONS<br />
BARREL SHAFT: in nickel-free chronifer (DIN x 46 Cr 13 + S) with the following characteristics:<br />
stainless - antimagnetic - suitable for tempering<br />
FINISHING<br />
MOVEM<strong>EN</strong>T<br />
- Anglage and polishing by hand<br />
- Locking sections hand polished<br />
- Sapphire blasted milled sections<br />
- Lapped and polished contact points<br />
- Burnished pivots<br />
STEEL PARTS<br />
- Sapphire blasted surfaces<br />
- Anglage and polishing by hand<br />
GEAR WHEELS<br />
- Concave chamfering with a diamond tool<br />
- Circular finished faces<br />
- Gilding (before cutting the teeth)<br />
- Minimum correction applied to the wheels in order to preserve geometry and performance<br />
3