WNIP NOV DEC 19.6 DIGITAL

20
19.6
Wide range of test units for safety valves
wide range of test units are
A available for safety valves.
From analogue, digital to semiautomatic
(computerized) test
systems for testing and (re)
adjusting the set pressure,
seat tightness and general
performance with gas or liquid
test systems, range 0 – 1000 bar /
14,500 PSI.
The test units can be equipped
with a variety of parts and systems,
for example pressure – vacuum test
systems for breather valves and
other tank safety valves up to 24”.
Model: VC-SRV
° Testing with both Gas and
Liquid.
° Rigid Design with high quality
finish.
° Standard completed with
the unique Ventil Computer
registration Systems.
° According to all common
international standards and
directives.
° Stainless steel control panel and
liquid reservoir.
Model: VC-SP-T4
° Compact design for the use
in containers or other small
workshops.
° Rigid design with high quality
finish
Model: CT800-T4
° Fully Equipped test unit for
testing and (re)adjusting all
common types of tank relief
valves.
° The CT800 is completed with
dual range test system for testing
both in pressure and vacuum
conditions.
° Specifically designed to verify
the settings and leak rates
according to clean air emissions
control acts and test standard
API2000.
° Available as stand-alone unit or
as an optional module with other
safety valve test units.
PreVenTest, In-Situ testing of
PSV’s
Ingeniously designed systems
for testing all types of spring
operated PSV’s In-Situ, in process
and under normal operating
conditions.
The portable system enables you
to provide the correct working
and performance or identify
PSV’s in need of repair without
plant shut-down.
The PreVenTest system is
available in 2 types;
° PreVenTest LTC, lightweight,
hand controlled and battery
driven.
° PreVentTest Advance, fully
automatic.
° No plant shut-down
° No dismantling of the valve
° No loss of productivity
° No loss of profitability
admin@atts.co.za
Range of process calibration tools
Offering a range of process
calibration tools for
process environments such as
pharmaceutical, refining or other
industrial areas at a bench, out in
the plant, or in the field.
Electrical and multifunction
calibration
Fluke’s broad range of field
and bench calibrators source,
simulate, and measure pressure,
temperature, and electrical
signals to help verify and adjust
test equipment or almost any
process instrument.
mA loop calibration
Loop calibrators are essential
tools for working with 4-20
mA current loops. Fluke loop
calibrators provide mA sourcing,
simulation and measurement,
readouts in both mA and % of
span, 24 V loop supply, simple
operation and reliable accuracy.
Pressure calibration
Instrumentation is found
in virtually every process plant.
Periodic calibration of these
instruments is required to keep
plants operating efficiently and
safely.
Fluke provides a wide
selection of field and bench
calibration tools to quickly
and reliably calibrate pressure
instrumentation.
Temperature calibration
Temperature calibration
refers to the calibration of any
device used in a system that
measures temperature—from
sensors to transmitters to
displays.
Fluke offers bench and field
solutions to ensure process
temperature accuracy of not
only the system’s electronic
temperature signals, but also the
very temperature sensors that
initiate those signals.
• Fluke 7526B precision
process calibrator – the best
balance of economy and
accuracy for calibration of
temperature and pressure
process measurement
instrumentation.
• Fluke 754 HART
multifunction documenting
process calibrator - This field
and bench calibrator sources,
simulates, and measures
pressure, temperature,
and electrical signals with
exceptional precision.
• Fluke 718-300G pressure
calibrator with pump provides
a total pressure calibration
solution for transmitters,
gauges and switches with
pressure source and milliamp
measurement to calibrate and
maintain almost any pressure
device.
• Fluke P3100 hydraulic
deadweight tester - High quality,
high performance, easy to use
oil pressure calibration.
• Fluke 726 multifunction
process calibrator is designed
specifically for the process
industry with broad workload
coverage, calibration
power and unsurpassed
accuracy
• Fluke 9144 field
temperature metrology well -
Lightweight and portable field
dry-well small enough to easily
carry in one hand. (50 °C to 660
°C and accurate to ± 0.1 °C)
sales@comtest.co.za