You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Introduction<br />
Welcome and thank you for selecting Fortinet products for your network protection. This document describes how<br />
to configure wireless networks with FortiWiFi, FortiGate, and FortiAP units.<br />
This chapter contains the following topics:<br />
• Before you begin<br />
• How this guide is organized<br />
Before you begin<br />
Before you begin using this guide, please ensure that:<br />
• You have administrative access to the web-based manager and/or CLI.<br />
• The FortiGate unit is integrated into your network.<br />
• The operation mode has been configured.<br />
• The system time, DNS settings, administrator password, and network interfaces have been configured.<br />
• Firmware, FortiGuard Antivirus and FortiGuard Antispam updates are completed.<br />
• FortiGuard Analysis & Management Service is properly configured.<br />
While using the instructions in this guide, note that administrators are assumed to be super_admin administrators<br />
unless otherwise specified. Some restrictions will apply to other administrators.<br />
How this guide is organized<br />
This <strong>FortiOS</strong> <strong>Handbook</strong> chapter contains the following sections:<br />
Introduction to wireless networking explains the basic concepts of wireless networking and how to plan your<br />
wireless network.<br />
Configuring a WiFi LAN explains how to set up a basic wireless network, prior to deploying access point hardware.<br />
Access point deployment explains how to deploy access point hardware and add it to your wireless network<br />
configuration.<br />
<strong>Wireless</strong> Mesh explains how to configure a Wi-Fi network where access points are connected to the Wi-Fi<br />
controller wirelessly instead of by Ethernet.<br />
WiFi-Ethernet Bridge Operation shows how to use the FortiAP Wi-Fi-Ethernet bridge feature.<br />
Protecting the WiFi Network explains the <strong>Wireless</strong> Intrusion Detection System (WIDS).<br />
<strong>Wireless</strong> network monitoring explains how to monitor your wireless clients and how to monitor other wireless<br />
access points, potentially rogues, in your coverage area.<br />
Configuring wireless network clients explains how to configure typical wireless clients to work with a WPA-<br />
Enterprise protected network.<br />
10 <strong>Deploying</strong> <strong>Wireless</strong> <strong>Networks</strong> for <strong>FortiOS</strong> 5.4<br />
Fortinet Technologies Inc.