30.11.2016 Views

FortiOS Handbook - Deploying Wireless Networks

wireless-54

wireless-54

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Setting your geographic location<br />

Configuring a WiFi LAN<br />

• Configure one or more SSIDs for your wireless network. The SSID configuration includes DHCP and DNS settings.<br />

• Configure the user group and users for authentication on the WLAN.<br />

• Configure the firewall policy for the WLAN.<br />

• Optionally, customize the captive portal.<br />

• Configure access points.<br />

Configuration of the built-in AP on FortiWiFi units is described in this chapter. Connection and configuration of<br />

FortiAP units is described in the next chapter, see Access point deployment on page 51.<br />

Setting your geographic location<br />

The maximum allowed transmitter power and permitted radio channels for WiFi networks depend on the region in<br />

which the network is located. By default, the WiFi controller is configured for the United States. If you are located<br />

in any other region, you need to set your location before you begin configuring wireless networks.<br />

To change the location setting - CLI<br />

To change the country to France, for example, enter<br />

config wireless-controller setting<br />

set country FR<br />

end<br />

To see the list of country codes, enter a question mark (‘?’) instead of a country code.<br />

Before changing the country setting, you must remove all FortiAP Profiles. To do this,<br />

go to WiFi & Switch Controller > FortiAP Profiles.<br />

Creating a FortiAP Profile<br />

A FortiAP Profile defines radio settings for a particular platform (FortiAP model). The profile also selects which<br />

SSIDs (virtual APs) the APs will carry. FortiAP units contain two radio transceivers, making it possible, for<br />

example, to provide both 2.4GHz 802.11b/g/n and 5GHz 802.11a/n service from the same access point. The<br />

radios can also be used for monitoring, used for the Rogue AP detection feature.<br />

You can modify existing FortiAP profiles or create new ones of your own.<br />

On FortiGate model 30D, web-based manager configuration of FortiAP Profiles is<br />

disabled by default. To enable AP profiles, enter the following CLI commands:<br />

config system settings<br />

set gui-ap-profile enable<br />

end<br />

30 <strong>Deploying</strong> <strong>Wireless</strong> <strong>Networks</strong> for <strong>FortiOS</strong> 5.4<br />

Fortinet Technologies Inc.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!