Chemequal - Global Chemical Marketplace

chemequal

ChemEqual, the largest chemical marketplace gives the opportunity to buyer to compare and buy chemicals and equivalents. From Brewery Chemicals, to descaling chemical like Citric Acid Descaler, Sulfamic Acid Descaler or any other organic acids. Serving the Automobile Industry with a chemical for every step. From Coolant Corrosion Inhibitor to coolant additives like Fluoroscent Dye for leak detection. Rodine Acid Inhibitor protects the system from acid corrosion. Drinking Water Chemicals like Reverse Osmosis Chemicals, RO Antiscalant. Various glycol antifreeze starting from Monoethylene Glycol to Diethylene Glycol or Inhibited Ethylene Glycol, ChemEqual serves every industry.

Chemequal is an online chemical portal where potential buyers can look for their required chemicals marketed under

different trade names. It serves as a big online database of chemical suppliers, manufacturers, exporters available under

one roof for easy comparison. It breaks

commodity brand monopoly, allowing

buyers to choose their own variant from a

list of products under a similar generic

type.

Features & Benefits summarized:





Getting easy alternatives for a

searched item

Compare all the products under

one head

Sellers can enlist their products

online and get particular enquiries

from worldwide purchasers

No commodity fetishism, or brand

monopoly

Few of the products summarized are as follows:

Polyacrylamide is used to flocculate solids in a fluid. This procedure applies to water treatment, and procedures like

paper making and screen printing.





Flocculation: PAM with their adhering capacity act as flocculants. Polymers regularly carry electrostatic charges

that take into account surface molecule balance bringing about flocculation.

Adsorption: PAM adheres to molecule surfaces with reversible covalent bonds between molecule surfaces

permitting them to increase in size and mass.

Friction Reduction: PAM effectively diminishes friction in tunnels. Friction loss is minimized by 50 - 80% with a

little addition of the product.

Thickening Agent: PAM is used to thicken an assortment of mud in neutral and acidic conditions.

Anionic PAM: Broadly used for industrial and municipal waste water treatment. for various industries of coal washing,

mineral preparing, metallurgy, iron and steel industry, electronics. Also functions as a part of oil industry to improve oil

recuperation. Anionic PAM is also utilized as paper and pulp additives.

Cationic PAM: Finds most functions for its high drying out rate. It is used for waste water treatment in liquor

manufacturing plants, sugar industrial facilities, food and beverage industries, tanneries, colouring and similar fields. It is

also used as paper additives.

Non-ionic PAM: Non-ionic PAM finds its most application in acidic soiling. Used for textile and pulp industry, paper

chemicals, water shutoff specialists, etc. Because of its non-ionic group, pH has little or no influence on N-PAM.

Descaling Chemical like Sulfamic Acid Descaler is an excellent grade descaling agent for various industrial and domestic

equipments. It finds use in fertilizer industry, dairy, boilers, brewery, sugar indusries and much more. It has excellent

descaling properties and does not release toxic fumes unlike other acid descalers. It is formulated to protect mellow

steel, stainless steel, copper and metal against corrosive attacks.


Sulfamic Acid Descaler is a progressed scale treatment containing an additional film forming inhibitor that attempts to

ensure gentle steel, stainless steel, copper and metal against corrosive assaults. The inhibitor properties additionally

serve as a proficient penetrant and dispersant to upgrade the adequacy of the acid. This can be used to break up lime

scales (calcium carbonate) and is a

perfect for the treatment for boilers,

calorifiers and heat exchangers.

Citric Acid is a weak organic acid

serving as a descaling agent. It is

mostly used to remove lime scales

from boilers. Citric Acid Descaler

works efficiently as a descaling and

chelating agent.

Rodine Acid Inhibitor incorporates

items that repress the erosion of

metals against acids like

Hydrochloric acid, Hydrofluoric acid,

Sulphuric acid, Phosphoric acid,

Sulphamic acid, and other natural or

blend of acids.

Acid corrosion is an electrochemical process coordinated by the presence of moisture, acidic contamination of the metal

surfaces and oxygen. This requires the prerequisites of acid inhibitors to help in preventing the corrosive assault on the

base metal. The sort and concentration of the inhibitor used is by and large determined by the sort and properties of the

metal to be protected and the conditions under which the metal is to be dealt with.

Rodine Acid Inhibitor helps in diminishing iron development alongside supporting the effects of over-pickling. These

inhibitors account for a better appearance of the metal. This range of inhibitors incorporates items that have been

figured to be utilized as a part of most corrosive cleaning operations without upsetting the efficiency.

Glycol has functioned as an effective heat transfer fluid in the food industry. Alternatives fail as heat transfer fluids

because of the following reasons:





Water is ineffective for freezing applications since it freezes at zero degree Centrigrade

Uninhibited Glycol gets oxidized in presence of air

Alcohol is flammable and volatile

Defrosting chemicals are energy consuming

Inhibited Ethylene Glycol benefits the same with the following characteristics:




Odourless and colourless with low oral toxicity

Good heat transferring ability with inhibitors reducing corrosion

Non inflammable

Drinking Water Chemicals consider a wide range of products that prevent water contamination and rendering it okay to

drink. These chemicals mosly incorporate Reverse Osmosis Chemicals like RO Film Cleaners, RO Antiscalant, Jar Cleaning

Chemicals, Mineral Additives, and so forth.


Drinking water serves as the most vital component for the sustenance of life. Regular tap water has found to contain

more than 2000 unique sorts of harmful chemicals. This makes water treatment vital. The safest approach to drink

conventional tap water is to utilize water purification system.

Most water is cleaned for human utilization (drinking water) but they require a better treatment such as Reverse

Osmosis. Quality principles of drinking water are regularly set by governments or globally.

RO treatment plants are contaminated by pollutants, and organic matter decreasing overall performance.

Requiring the need for Reverse Osmosis Chemicals such as:





RO Antiscalant preventing scaling on the membranes

Membrane Cleaner helps remove contaminants

Membrane Biocide effective sanitizes the membrane and prevents recontamination

Membrane Preservative keeping up the efficiency of the membrane

Coolant or heat transfer fluids prevent

devices from overheating by scattering the

heat energy generated. General properties of

coolant include high heat transferring

capacity, low viscosity, chemically inert in

nature. Coolant Corrosion Inhibitor or oxygen

scavenger for coolant systems remove oxygen

from the coolant that otherwise oxidize and

damage the flowing pipelines. Coolant

additives as such stabilize the pH, and prevent

corrosion of metals.

The dissolved materials in the coolant adhere

to the pipe surfaces and form scales which

hinder the general flow and heat transferring

capacity of the coolant.

Benefits of Coolant Corrosion Inhibitor:





Anti corrosion

Prevent scaling

Increases system life

Saves power

Brewery Chemicals can be considered as the whole set of chemicals that aid in cleaning and effective sanitation of

distilleries, breweries, microbreweries, etc. These chemicals doesn't impact the kind and flavour of the beer. Amidst

making of beer, there are inclinations of scaling and soiling within the brewkettles, fermentation vessels,

crush/lautertuns, heat exchangers, fillers, barrels, sections, and saccharification tanks.

These cause a reduction in the ability to trade heat and may achieve undesired flavors, hardware failures, diseases and

unbalanced downtime. These circumstances incite the necessity for Brewery Chemicals which include cleaners,

sanitizers, etc. Cleaning and sanitation act as a fundamental part of a distillery and should be considered about at every


period of the fermenting procedure. Sanitation helps in decreasing the surface masses of microorganisms after cleaning

and inhibits microbial advancement on the distillery gear.

More magazines by this user
Similar magazines