DeepWell brosjyre_LOW

DeepWell
E-line services

About DeepWell
DeepWell was established in 2004 and have headquarter in Husøy,
outside city of Haugesund. Husøy headquarter consist of administration
office, workshop and yard area, in addition to a deepwater quay.
In the yard, we have a 330 meter deep Test Well with derrick.
This test well is used for training, testing and performing R & D projects.
Logging Division was established in 2014 and are located in our base
at Forus in Stavanger. The Stavanger facilities support all e-line services,
workshop, customer support, operational planning, IO support,
equipment transit and extended wireline and company owned
equipment storage.
DeepWell onshore support center
Well service supervisor office
Client onshore support center
2

The well intervention
company for the future
An adaptive organization that is fully
focused on its client’s request will
always be a part of the future in
the Oil and Gas industry.
DeepWell with its client focused
business, operational models and
adaptive approach will for sure
play a role as a reliant partner in
the Oil and Gas Industry’s future.
Core Values
Intelligent solutions begin
with brainpower. DeepWell
require minds with intellectual
capacity – minds eager
to learn more.
By listening and thus understanding
our client’s needs,
we are able to deliver high
quality service.
We are doers. We are reliable
with a clear mission to
deliver, with our company’s
interest at heart. We are
DeepWellers.
We expect complete dedication
to matters of safety,
from ourselves and from our
clients. We are thinksers,
and we think safety first.
3

The power of
DeepWell
INNOVATION
Always looking for new innovative solutions
FOCUS AND INSPIRATION
Focused organization with proven track record
Inspired by new technology and opportunities
MEETING THE NORTH SEA STANDARDS
New rules and regulations (NORSOK D-002
and R-003) requires new equipment
SAFETY FOCUS
Challenges current operational standards
REDUCED MANNING
Internal X-training and IO Co-operation with
3 parties reduces POB drastically
OPERATIONAL EFFICIENCY
Real time connected shore and well site crews
Equipment based on modern control
system technologies
Pre-planning operations – Best practices
Continuous cooperation with our Costumers
MORE KNOWLEDGE – IN REAL TIME
We want IO to go further
Why use DeepWell
Reduce contract management
Introduce more integrated services
Reducing people on board & footprint
More cost efficient operations
Faster response rate
Less administration
Improved operational efficiency
Increased resources
Real time data support
4

DeepWell E-line crew model
DeepWell`s Dynamic E-line crew model is based on a
combination of technical improvements and composition
of 3 fully x-trained crew members where 2 serves as the
core team on each shift and a third person takes the role as
E-line & cased Hole engineer in charge. Mechanical Wireline
x-trained DeepWell Cased Hole Logging engineer will be
embedded in the crew. Cased Hole logging part of work
will be executed with additional support available from an
onshore specialist at IO center.
X-training are performed at DeepWell`s training center
on Husøy.
For any other third party service to be executed by or
through a DW crew, the model opens for embedding 3rd
party personnel in DW Crew, and link backwards to their
respective IO support systems or as per their agreements
with our Client.
Electrical wireline unit
Prepared for full logging service, no need for additional logging container
Improved speed and tension control.
Full control and monitoring functionality from three LCD monitors
Remote support system from onshore specialists
Real time monitoring for all parameters to onshore drilling centre
Overpressurized unit
5

Real time work flow
Better efficiency
– more production
6

DeepWell Intervention
ELECTRICAL DRIVEN WINCHES
CLIENT VALUE – more effective operations
Improved well data aqusition
Improved rig-up
Increased production time
ELECTRONIC WELL DATA MANAGEMENT
CLIENT VALUE – more effective operations
Right decision in shorter time
Less deferred production
Reduced need for personnel offshore
ERGONOMIC DESIGN AND
HUMAN MACHINE INTERFACE
CLIENT VALUE – more effective operations
Reduced rig-up time
Improved knowledge of well dynamics
Reduced injuries and sick-leave
7

Cerberus Wireline Tension Modeling
DEPLOYMENT RISK MANAGEMENT
Technologies have been introduced that mitigate
or eliminate risk scenarios that could jeopardize
safe and fast wire line interventions in modern
complex wells.
CERBERUS
As one of the most cost effective and proven
modeling software. Deepwell staff has the longest
history in the market using Cerberus modelling
in advanced wireline well intervention service.
BENEFITS
Allows visualization of the magnitude
and nature of deployment risk present
in wireline well interventions.
8

Service capability
Caliper
Depth
correlation
PLT
Explosive
service
Leak
detection
Downhole
camera
New
technology
9

DeepWell
E-line services – the tools you need for the job
Adding electrical wireline
services by providing
expertise in...
Tools
Calipers
Depth Correlation
Production Logging
Downhole Camera
Well Integrity
Gauges & Hangers
Non-explosive Plasma
cutters and Punchers
Explosive services
10

People
Data
Highly skilled
Field Engineers
Specific skill requirement
targeting policy
Log Data Analyst – provide
answers, not just data
Superior analysis
Solutions driven data
Reports
Presentations
Consultancy
Special projects
11

Production Logging service
DeepWell utilize marked leading
short combination tools from
leading industrial providers,
including standard single phase
PLT and Multi Array Production
Suite (MAPS) for advanced flow
regime in horizontal wells.
All tools fully interchangeable
and combinable with cement
log and calipers.
Trenger bilde
Production logging
DeepWell can provide single, dual and multi-phase flow analysis.
Tools can be combined to retrieve desired data giving a cost effective solution
Depth correlation, flow, density, water hold-up, gas hold-up, temperature, pressure
Array Tools to suit horizontal and deviated wells giving full radial measurement.
Low fricti
toolstring
If included in the
toolstring, you will
• Longer reach
• Avoid tractor conv
• Cost effective
• Faster conveyance
• Less mandays
• Less equipment
12

Well integrity services
DeepWell provides a full
suite of marked leading
tools for well integrity
services, all combinable:
Multifinger caliper
Magnetic thickness tool
Radial bond tool
Leak detection noise tool
on
have;
eyance
of BHA
13

Leak detection service
DeepWell offers leak detection
service using combination of
high-resolution temperature
and pressure sensors, spinner
flowmeters and latest
generation noise tools.
This provides rugged and
simple but powerful well
integrity tool package.
It is all about finding
the leak signature:
Leak
Signature
Temperature and pressure
gradient anomaly
Fluid movement on spinner
Amplitude peak on noise log
Noise tool
The noise tool is able to detect acoustic waves from
a wide range of frequencies (100 Hz-12.7Khz),
extending its use to several applications.
The digital noise tool detects the sounds from liquid
or gas movement in leaks, channels or perforations.
Increasing flow rate
Noise Log Temperature Spinner
Locate leaks in a well case
Evaluate flow profiles
Locate channels behind a well case
Hydrophone
Piezoelectric Transducer
Locate gas-liquid interfaces
Locate gas entries
14

Multifinger caliper
Multifinger calipers measures
the inner diameter of tubulars
with very high accuracy
24, 40 or 60 Finger Tools
Survey tubular from 1-3/4” to 16”
Highly accurate data
Can be run in surface or memory mode
Combines with other tools/reduce no of
runs and retrieve maximum data
Magnetic thickness
The Magnetic Thickness Tool uses
12 sensors to investigate variations
of pipe metal thickness
Combining data from Caliper,
metal thickness and OD are derived
12 sensors
Magnetic wave
15

Interpretation services
DeepWell reports are tailored to the specific requirements of our clients, based on direct
communication and discussions with logging data stakeholders ahead of any operations.
We emphasize to display and highlight the core findings supported by all relevant and
background sensor figures.
Reports can range from standard basic field data outputs to full blown reservoir analysis
by one of our Company approved petrophysical experts.
Data analysis
QC of cased hole well data
Data Management Services
Log Analysis
Sonic Processing
Multi Finger Caliper Processing
PLT Analysis
16

Non-Explosive cutting & punching
Radial cutting torch (RCT)
Provides a safe and reliable method of
cutting pipe and tubing in range from
1 ¼” to 9 5/8” pipe. Cuts stainless steel,
plastic coated pipe and cast alloys
The RCT fully functional cut in dry
conditions as well as heavy mud
Contains no explosives
Radial exit
port (sealed)
Housing
Thermite
Nozzle
Nozzle sleeve
Diverter
Radial exit
port (exposed)
Nozzle sleeve
(shifted)
Before initiation
After initiation
Perforating Torch system (PTS)
Provides a safe and reliable method of punching pipe and tubing
and penetrates stainless steel, plastic coated pipe and cast alloys.
The PTC fully functional perforates in dry conditions as well as
heavy mud and punches single / dual perforations in sizes from
0.38in² to 7.5in².
Perforator contains no explosives – classified as flammable solids
Downhole Electric
Cutter Tool (DECT)
Precise cutting without using dangerous
chemicals or explosives
17

Explosive service
Advanced ballistic delivery system
(BDS): DeepWell utilize advanced
ballistic systems for accurate
orientating and positioning of
our ballistic portfolio.
Safe initiation system: Hunting
Titan’s ControlFire® switch system is
the latest in perforating switch technology.
Unique switch identification
to selectively perforate multiple
intervals (+ 40 switches) in a single
trip. Fully comply with API RP-67
and prepared for the new “no-field
wiring” H1 gun system.
Pipe recovery
cutting & punching
Jet cutters
Most reliable cutter in the industry
Uses state of the art shaped charge design
Large range, cut from 1,58” tubing / casing and upwards
Severing tool
Used for the most severe pipe recovery operations and designed
to sever drill collars and heavyweight drill pipe. Reliable and safe.
Tubing punch
DeepWell new line of knock-out circulation charges provide flow
between two strings of tubing pipe and at the same time avoid
collateral impact on the secondary string while maximizing hole size
in the primary string (0,3” to 0,6” dia.).
18

Perforating
DeepWell can provide market leading solutions
and supplies the widest range of products available.
String shot
Back off pipe
Release stuck packers or fishing tools, such as an overshot
Remove corrosion and scale from pipe
Reopen existing perforations
Bump drill pipe loose in key seats (hard formations)
Remove jet nozzles in drill bits to increase rate of circulation
19

Plug setting
I-set electro hydraulic setting tool
Field proven new generation of Non-Explosive setting tools
Enables setting of all standard plug, packer and gauge hanger applications
Surface controlled or memory based
Slim 2,165” version and 3,6” version, both field proven with 100% success rate
E-line version fully interact with DW acquisition system, well data in Surface
Read Out or Memory
Easy of use
Touch controlled
Quick Reset
Robust and Reliable (can be run up to 25 times without maintenance!)
Metal seals
Safety- Non explosive, No DG, SRO or MRO
Customized adaptors (interface with 3rd part companies)
Gauge-Hanger
Small O.D. and high Expansion
Setting ranges 2 1/16” - 7”
High flow area
Short length and low weight
Simple Redressing
Short Setting Stroke (3 inch)
Retrieve with standard Pulling tools
Used to install Pioneer Quartz gauges
20

New technology
DeepWell tractor service
DeepWell keeps a unique in-house knowledge and experience in Wireline
tractor operations. The new Mink Conveyance system is the latest
generation E-line tractor based on a globally field proven and reliable tool
design. Operatied by DeepWell wireline crew – no additional personnel
required. Used for Cased Hole Logging and perforation services.
FEATURES:
Small cross section – low distortion of flow
Bi-directional drive
Static anchoring for high flow production logging
Telemetry with SRO Head Tension, CCL and temperature
Low friction design – less tractoring
API RP 67 compliant
21

New technology
Enhanced Oil Recovery
Rexonics Ultrasound Cleaner
Cavitation in fluid caused by ultrasound frequency
Application
Stimulation and cleaning of on-and offshore oil wells in all liquid recovery phases
Technical approach
Using more effective high-power ultrasound technology instead of acids / chemicals
Differentiators
Reduction of oil production cost
Innovative
100% eco-friendly, reusable, no chemicals
Swiss engineered and patented technology
Converter
Electrical energy
1 • Plugged Pore Space
Mechanical energy
2 • Application of Ultrasound
Booster
Amplitude increase
3 • Unrestricted flow
Sonotrode
Resonator
22

New technology
Cable Technology
Anaconda coated E-line system
Extends E-line operational envelop by combining high tensile
strength with reduced weight and lower friction vs conventional lines.
Higher line speed reduces operational time. No grease injection.
Increased tool space in lubricator.
Available on request
Slick E-line
Downhole camera
Fiber Optic services ; DTS/DAS acquisition services

DEEPWELL AS
Tel.: (+47) 52 70 10 20
post@deepwell.no
www.deepwell.no
Husøyveien 171
N-4262 Avaldsnes
Norway
STAVANGER OFFICE:
Christian August Thorings veg 2
N-4033 Stavanger
Norway
Duty tel.:
Wireline: (+47) 488 98 030
Logging: (+47) 989 04 338
Personnel: (+47) 950 97 628
DENMARK OFFICE:
Kanalen 1
DK-6700 Esbjerg
Denmark