Outdoor Lighting - Thorn

thornlighting.com.au

Outdoor Lighting - Thorn

50 50

Outdoor Lighting

Lighting people and places

www.thornlighting.com.au


Narrabundah Ballpark, Canberra, ACT

Area and Sports

Floodlighting

Thorn offers many different types

of Area and Sports Luminaires.

Use this pictorial summary to

help find what you need

Areaflood

52

Mundial

60

Troika

54

Areapak 1

56

Areapak 2

57

Champion

58

Lighting people and places

51

OUTDOOR

AREA AND SPORTS FLOODLIGHTING


52

Areaflood

An asymmetric ‘inclined flat

glass’ floodlight with built in

superior environment optics

that limit upward light

Louvre - Size 1

Lighting people and places

Areaflood

Wire Guard Blue Filter

TC-TEL (FSM) Gx24q-4 42W HST (ST) E40 150-400W

TC-TEL (FSM) Gx24q-5 57W HIT-CE (MT) E40 150-400W

HST (ST) E27 70W CPO-TW (MT) PGZ12 60-140W

HIT-CE (MT) E27 70W CDM elite PGZ18 210-315W

AS/NZS60598 Class I Electrical IK10 (with wire guard)

IK08 IP66 – optical and gear compartment

• Available in two sizes, with

a choice of 70-400W high

pressure sodium (HST),

60-400W metal halide (HIT)

for levels of white light or

42- 57W compact fluorescent

(TC-TEL)

• Choice of asymmetric or street

optic for size 1

• The asymmetrical reflector

is made of high quality

aluminium and ultra high

reflectivity aluminium

coating for size 2 (95% total

reflectivity)

• Peak beam angles are 45° for

size 1 or 60° control for size 2

• The accurate optical system

and integrated visor permits

effective control of obtrusive

light (0cd at 90°)

• Broad choice of lamps and

accessories helps create the

most appropriate ambience

and mood

• Available in Cosmopolis or

CDM elite lamps for greater

energy efficiency

Materials/Finish

Body: Recyclable die-cast

aluminium LM6 for high

corrosion resistance.Finishes:

Powder coated anthracite.

Gasket: Silicon gasket provides

IP66 seal.

Hinges and finger grips:

Polyamid glass fibre 20%.

Closing glass: captive or

retaining screws (2 for size 1,

4 for size 2).

Gear tray box: polyamid glass

fibre 30%.

Gear tray box cover:

polypropylene.

Reflectors:

Size 1: high reflectivity preanodised

high grade aluminium.

Size 2: very high reflectivity preanodised

high grade aluminium

(95% total reflectivity).

Glass: toughened (5mm thick).

Accessories: metal plate painted

in the same finish as the body.

Filters: tinted row coloured filters.

Installation/Mounting

Reversible mounting stirrup and

aiming for horizontal position

is simplified via 2 indicators

depending on the stirrup

mounting position.

Cable gland for 8-12mm.

Drop front glass access with 2

screws for size 1 and 4 screws

for size 2.

Delivered with stirrup, gear tray

and with or without lamp (except

Cosmopolis, CDM elite MW and

compact fluorescent versions).

Choice of spigot adaptor for

post top mounting the stirrup

onto a column (60 or 76mmØ).

Fixes to column with 2 M10

bolts and nuts (supplied). Stirrup

fixed by 2 bolts and washers

(supplied).

Choice of decorative bracket

arm for mounting size 1

floodlight stirrup onto column

(60 or 76mmØ). Fixes via 4 M8

bolts (not supplied).

www.thornlighting.com.au


Ordering Guide Supplied complete with lamp except ’HID’ versions.

Areaflood size 1

Gear Description Ilcos Code Socket Wt (kg) Asymmetric Street

Electronic AREA1 42W TC-TEL FSM GX24q-4 7.3 96255553 -

Electronic AREA1 57W TC-TEL FSM GX24q-5 7.7 - 96255568

Electronic AREA1 60W HIT-CE MT PGZ12 7.9 96255576 -

Conventional AREA1 70W HID ST/MT E27 8.8 96256410 96256620

Electronic AREA1 140W HIT-CE MT PGZ12 8.1 96255745 -

Conventional

Areaflood size 2

AREA1 150W HID ST/MT E40 9.5 96256411 96256619

Gear Description Ilcos Code Socket Wt (kg) Asymmetric Street

Electronic AREA2 210W HIT-CE MT PGZ18 13.7 96255885 -

Conventional AREA2 250W HID ST/MT E40 15.7 96256412 -

Electronic AREA2 315W HIT-CE MT PGZ18 14.4 96255948 -

Conventional AREA2 400W HID ST/MT E40 20.0 96256413 -

Size 1 Accessories

Description Wt (kg) SAP Code

BARN DOORS 1.9 96255327

COLOUR FILTER – BLUE 1.4 96255329

COLOUR FILTER – GREEN 1.4 96255331

COLOUR FILTER – RED 1.4 96255333

COLOUR FILTER – YELLOW 1.4 96255335

LOUVRES 1.4 96255337

WIRE GUARD 1.9 96255339

POST TOP 60MM 1.7 96256062

POST TOP 76MM 1.6 96256060

DECORATIVE STIRRUP 60MM

Size 2 Accessories

5.0 96256105

Description Wt (kg) SAP Code

BARN DOORS 2.9 96255341

COLOUR FILTER – BLUE 2.3 96255343

COLOUR FILTER – GREEN 2.3 96255345

COLOUR FILTER – RED 2.3 96255347

COLOUR FILTER – YELLOW 2.3 96255349

LOUVRES 2.4 96255351

WIRE GUARD 2.9 96255353

POST TOP 60MM 1.6 96256062

POST TOP 76MM 1.6 96256060

HID Conventional gear that operates both HST or HIT-CE lamps

Suggested eco-friendly alternative

900

800

700

600

500

400

300

200

100

0

-90 -60 -30 0 30 60 90

0

-90 -60 -30 0 30 60 90

Size 1 Asymmetric 150W HIT

Size 2 Asymmetric 400W HIT-CE

DLOR: 0.73

DLOR: 0.74

Imax: 855cd/klm

Imax: 760cd/klm

Ap Imax/2: 40.50°

Ap Imax/2: 2x46.30°

www.thornlighting.com.au

800

700

600

500

400

300

200

100

477

458

477

206

206

308

231

368

Size 1

Weight:


54

Troika

An asymmetric ‘flat glass’

floodlight for 250-600W

discharge lamps, with a

unique adjustable lampholder

for optimum lighting control

Lighting people and places

• Ideal for sports, functional and

architectural applications

• Wide choice of lamp types

• Innovative reflector optimises

performance and three lamp

positions offers a variety of

light distributions

60�

65�

70�

Troika Variable 60 - 70

HIT-CE (MT) E40 250-400W

HST (ST) E40 250-600W

AS/NZS60598 Class II Electrical

5 Nm Impact resistant (20 Nm wire guard)

IP65

• Light output is finely controlled

to minimise light pollution

• Broad selection of attachments,

including a ‘Lux Guillotine’.

This adjustable vertical light

shield enables the light beam

to be cut-off exactly where

required

www.thornlighting.com.au

Futsal Stadium, Cairns, QLD


Materials/Finish

Body: recyclable pressure

die-cast aluminium LM2, powder

coat painted in grey. Standard

finish close to RAL 9007.

Gear tray cover: re-cyclable

technopolymer (Polyamide

reinforced with 20% glass fibre).

Glass: toughened, 5mm thick

Stirrup: galvanised steel,

painted in grey.

Bolts and screws: stainless steel.

Glass fixing toggles: re-cyclable

technopolymer (Polyamide

reinforced with 20% glass fibre).

Reflector: ultra specular preanodised

high grade aluminium.

Accessories frame: aluminium.

520 195

270

750

www.thornlighting.com.au

Installation/Mounting

Access to lamp via hinged glass

released by four retained Allen

screws and sliding toggles.

Lamp replacement possible

without removing attachments.

Installation of gear tray and

access to gear compartment via

removable gear cover released

by four retained Allen screws.

Cable gland for 7.5 - 13mm

diameter cable. Additional knock

out provided for through wiring.

Aiming is simplified by indicator

on floodlight body. Stirrup fixed

by bolts through central 22mm

diameter hole and two further

15mm diameter holes positioned

100mm either side of the central

hole. The 600W option may be

used for interiors if the control

gear is housed remotely from

the fitting.

Ordering Guide Lamps to be ordered separately. For complete fitting please order

floodlight and gear tray.

Description

Floodlight

Ilcos Code Socket Wt (kg) SAP Code

TROIKA HST/HIT 250/400W R60-70 MT/ST E40 14.0 96007508

TROIKA HST 600W R60-70

Gear Trays

ST E40 14.0 96008452

HST 250W ST E40 3.5 96011251

HST 400W ST E40 4.9 96011253

HST 600W ST E40 7.9 96008454

HIT 250W MT E40 3.5 96011249

HIT 400W

Accessories

MT E40 4.9 96011250

LUX GUILLOTINE AND ACCESSORY FRAME 1.5 96008494

BARN DOORS 1.0 96008495

WIRE GUARD 1.9 96008496

LOUVRE 0.8 96008497

Windage: 0.12m 2

1200

1000

800

600

400

200

cd/1000 lm

0

-90° -60° -30° 0° 30° 60° 90°

Lamp: Cat. No. 250 QTKA2540MSE40

HST

Position Lamp: 3250W

HPS-T position 3

--- Horizontal horizontal

Vertical vertical

Specification

To specify state:

‘Flat glass’ asymmetric floodlight

in die-cast aluminium with

high grade technopolymer

gear tray cover and adjustable

lamp holder mechanism,

sealed to IP65 (optical and

gear compartment). Access

to lamp via hinged glass with

four retained fixing points.

Installation of, and access to,

gear tray via removable cover

with integral respirator. Suitable

for 250W/400W/600W HST

250W/400W HIT lamps.

As Thorn Troika.

Accessories

All accessories are mounted in a

common aluminium frame which

fixes to the face of the floodlight

and is hinged along one side to

ease lamp maintenance. Access

to the lamp can be achieved

without the need to fully remove

the accessories.

Beam data

Peak intensity (l) cd/klm 1240

Beam factor to 10% peak (l) 0.51

Beam angle to 10% of peak (l) Horizontal 2 x 56°

Vertical 12°/78°

Beam angle to 50% of peak (l) Horizontal 2 x 34°

Vertical 5°/5°

Beam angle to 1% of peak (l) Horizontal 2 x 68°

Vertical 23°/112°

I peak

59°

24m

16m

8m

0

8m

16m

lux/1000 lm

0.50

1.00

3.00

5.00

8m 0 8m 16m

Lamp: Cat. No. 250 QTKA2540MSE40

HST

Position Mounting 3 height: 8.0m

Mounting Height: 8m

Lighting people and places

55

OUTDOOR

AREA AND SPORTS FLOODLIGHTING


56

Areapak 1

A general purpose floodlight

supplied with a 70W/150W

High Pressure Sodium or

Metal Halide lamp

Lighting people and places

387.5

Areapak 1

310

353

423

115

125.5

65

• Robust die-cast aluminium LM6

body and front frame

• Asymmetrical reflector with

dimpled anodized aluminium

and speclar side reflector

• Toughened front glass

Attachments for Areapak 1 & 2

Louvre attachment

Wire guard

Spill Shield

Ordering Guide Supplied complete with lamp, except COMBO gear luminaire.

Description

Areapak 1

Ilcos Code Socket Wt (kg) SAP Code

AREAPAK 1 70W HIT RX7S CWL MD RX7S 6.9 96043377

AREAPAK 1 70W HST/HIT COMBO E27* ST/MT E27 6.9 96043376

AREAPAK 1 150W HIT RX7S CWL MD RX7S 7.1 96043381

AREAPAK 1 150W HST/HIT COMBO E40*

Attachments

MT E40 7.1 96043380

AREAPAK 1 70/150 BLACK LOUVRE 96043388

AREAPAK 1 70/150 SPILL SHIELD 96043389

AREAPAK 1 70/150 WIRE GUARD 96043387

*Supplied less lamp

HST (ST) E27 70W-150W

HIT (MT) E27 70W-150W

HST (ST) E40 150W

HIT (MT) E40 150W

HIT-DE (DE) RX7S 70W-150W

AS/NZS60598 Class I Electrical

5 Nm Impact resistant IP65

• Integral control gear

• Spill shield available to reduce

glare

• Special ribs designed to

improve heat dissipation

• Adjustable stirrup for flexibility

in mounting

• Easy installation and

maintenance with drop down

glass and cable entry

• Adjustable stirrup for flexibility

in mounting

• Special stirrup protective cap

in Thorn Red

• Sealed to IP65

Materials/Finish

Body and front frame: die-cast

aluminium LM6, painted black

RAL9005.

Reflectors: dimpled anodized

aluminium with specular side

reflector.

Lens: tempered 4mm flat glass

with stainless steel bolts and

silicone rubber gasket.

Stirrup: 4mm mild steel, powder

coated black, RAL 9005.

Installation/Mounting

Single gland cable entry suitable

for Ø9-13mm OD cable with

3 pole terminal block for up to

4mm cables.

Areapak 1 has a stirrup fixed by

a single bolt through a 16mm

diameter hole. Two additional

11mm diameter fixing holes at

102mm centres. Areapak 2 has

a stirrup fixed through a 21mm

diameter hole. Two additional

13mm diameter fixing holes at

250mm centres.

Specification

To specify state:

Enclosed floodlight with black

aluminium LM6 body and frame,

tempered flat glass, integral

control gear and asymmetrical

reflector suitable for 70W/150W

HST/HIT or 70/150W HIT-DE

lamp. Sealed to IP65.

As Thorn Areapak 1.

www.thornlighting.com.au


Areapak 2

A general purpose floodlight supplied

with a 250W or 400W High Pressure

Sodium or Metal Halide lamp

www.thornlighting.com.au

490

Areapak 2

Ordering Guide Supplied complete with lamp.

Description

Areapak 2

Ilcos Code Socket Wt (kg) SAP Code

AREAPAK 2 250W HST E40 CWL ST E40 12.0 96043382

AREAPAK 2 250W HIT E40 CWL MT E40 11.3 96043385

AREAPAK 2 400W HST E40 CWL ST E40 14.0 96043383

AREAPAK 2 400W HIT E40 CWL

Attachments

MT E40 12.3 96043386

AREAPAK 2 BLACK LOUVRE 96043391

AREAPAK 2 SPILL SHIELD 96043393

AREAPAK 2 WIRE GUARD 96043390

375

418

577. 5

175

165.5

65

HIT-(MT) E20 250W-400W

HST (ST) E40 250W-400W

AS/NZS60598 Class I Electrical

5Nm Impact resistant IP65

• Robust die-cast aluminium LM6

body and front frame

• Asymmetrical reflector with

dimpled anodized aluminium

and specular side reflector

• Toughened front glass

• Integral control gear

• Spill shield available to reduce

glare

• Special ribs designed to

improve heat dissipation

• Easy installation and

maintenance with drop down

glass and cable entry

• Adjustable stirrup for flexibility

in mounting

• Special stirrup protective cap

in Thorn Red

• Sealed to IP65

Materials/Finish

Body and front frame: die-cast

aluminium LM6, painted black

RAL9005.

Reflectors: dimpled anodized

aluminium with specular side

reflector.

Lens: tempered 4mm flat glass

with stainless steel bolts and

silicone rubber gasket.

Stirrup: 4mm mild steel, powder

coated black, RAL 9005.

Installation/Mounting

Single gland cable entry suitable

for Ø9-13mm OD cable with

3 pole terminal block for up

to 4mm cables.

Areapak 1 has a stirrup fixed by

a single bolt through a 16mm

diameter hole. Two additional

11mm diameter fixing holes at

102mm centres.

Areapak 2 has a stirrup fixed

through a 21mm diameter hole.

Two additional 13mm diameter

fixing holes at 250mm centres.

Specification

To specify state:

Enclosed floodlight with black

aluminium LM6 body and

frame, tempered flat glass,

integral control gear and

asymmetrical reflector suitable

for 250W/400W HST or

250W/400W HIT lamp.

Sealed to IP65.

As Thorn Areapak 2.

Lighting people and places

57

OUTDOOR

AREA AND SPORTS FLOODLIGHTING


58

Champion

Our number one solution

to floodlighting general

areas and sporting grounds

where the control of

obtrusive light is critical

• Asymmetric floodlight for

1 and 2kW lamps,

incorporating an innovative

design concept which

takes the performance of

asymmetric floodlights to the

next level

• Champion combines many of

the performance features of

classic ‘projectors’ (high levels

of light output) with those of

‘flat glass’ projectors

(control of obtrusive Light)

• Instead of having a true ‘flat

glass’ construction, which can

limit the efficiency of a flood

light, Champion’s front glass

is inclined inside the floodlight

• The front of the body acts

as a cowl for full-cut-off and

provides a ‘virtual’ light

emitting surface which remains

parallel to the ground

• The optical design of

Champion is unique and sets

new standards for providing

‘on-pitch’ performance whilst

minimising the number of flood

lights required and the

contributions to obtrusive light

• Each lamp option has a

minimum of 4 lamp positions,

adjustable on-site, to provide

different photometries from

just one installed position

Lighting people and places

• Excellent colour appearance

and colour rendering can be

achieved through the use of

Metal Halide lamps

• Excellent glare control is

provided through Champion’s

unique optical construction

• Additional accessories for

increased control of

obtrusive light available

• The inherent design features

of Champion make installation

and maintenance both simple

and safe

• Available in hot-restrike option

• Bird spike available to special

order

• Optional stainless steel ignitor

cable available to special

order

Tilted glass closure enables

improved light output

Housing encloses optic, and also

provides cut-off control to light output

HQI-TS/S (MD) 1/2kW

HQI-TS/L (MD) 2kW

MHN-LA (MD) 1/2kW

HST (ST) E40 1kW

AS/NZS60598 Class I Electrical

IP66 (inc. the wiring/ignitor box)

Useful beam

www.thornlighting.com.au


Accessories/Attachments

• Adjustable visor (front

and sides)

• Adjustable visor (rear)

• Wire guard

• Reverse mounting Stirrup

(required for certain

mounting positions)

Materials/Finish

Body: die-cast aluminium

(LM6 Marine grade), unpainted.

Glass: 4mm toughened.

Wiring/ignitor box: polyamide

(66 V0 Black: 20% glass fibre

reinforced).

Screws: stainless steel.

Installation/Mounting

Rear access to lamp.

Automatic power interruption

on opening of rear access

door. Stirrup fixed by M20 bolt

through 22mm diameter hole,

or through 15mm diameter

holes. Ballast and capacitors to

be mounted separately. Cable

gland for 7.5-13mm cable.

Specification

To specify state:

Die cast aluminium asymmetric

floodlight for 1/2kW lamps,

IP66 rated, rear lamp access,

adjustable lamp position with

internally inclined front glass

and integral front cowl.

As Thorn Champion.

www.thornlighting.com.au

300

446

Windage: 0.21m 2 .

TOP VIEW

BACK VIEW

Ø15

870

720

645

Ø22 Ø15

100 100

Ordering Guide Lamps to be ordered separately. For complete fitting please order floodlight and gear tray.

Description Ilcos Code Socket Wt (kg) SAP Code

CHAMPION 1KW HST E40 WI ST E40 20.6 96012471

CHAMPION 1KW HQI - TSS OS WI MD - 20.6 96012473

CHAMPION 1KW MHN - LA PH WI MD - 20.6 96012474

CHAMPION 2KW HQI - TSL OS WI MD - 20.6 96012475

CHAMPION 2KW HQI - TSS OS WI MD - 20.6 96012476

CHAMPION 2KW MHN - LA PH WI MD - 20.6 96012477

Accessories

CHAMPION WG WIRE GUARD 1.8 96012480

CHAMPION REVERSE STIRRUP STIRRUP 4.4 96012481

CHAMPION AJ VS FRONT ADJUSTABLE VISOR 1.7 96012482

CHAMPION AJ VS REAR

Gear tray

ADJUSTABLE VISOR 0.9 96012483

CG TM 1KW HST/HQI/MHNLA 240V NI FUSED 96038288

CG TM 1KW HST/HQI/MHNLA 415V NI FUSED 96038289

CG WP 1KW HST/HQI/MHNLA 240V NI FUSED 96038290

CG WP 1KW HST/HQI/MHNLA 415V NI FUSED 96038291

CG TM 2KW HQI/MBIL 415V NI FUSED 96038305

CG WP 2KW HQI/MBIL 415V NI FUSED 96038306

CG TM 2KW MHNLA 415V NI FUSED 96038307

CG WP 2KW MHNLA 415V NI FUSED

HR - Hot Restrike version, TM - Tray mounted, WP - Weatherproof, WI - With ignitor, NI - No Ignitor

96038308

540

426

266

598

1800

1500

1200

900

600

300

0

-90� -60� -30� 0� 30� 60� 90�

Lamp: Lamp: 250W 2000W HPS-T position HQI TS 1 (long arc) positionVertical 1

I max: I max: 854 cd/1000 1361 cd/1000 lm I peak: lm I 67� peak: 66° Horizontal

I max/2: Horizontal: Vertical 2 x 31� Vertical: 59�/72� Horizontal

1800

1500

1200

900

600

300

Cd / 1000 lm

0

-90� -60� -30� 0� 30� 60� 90�

Lamp: Lamp: 250W 2000W HPS-T position HQI TS 1 (long arc) positionVertical 2

I max: I max: 854 cd/1000 1549 cd/1000 lm I peak: lm I 67� peak: 62° Horizontal

I max/2: Horizontal: Vertical 2 x 31� Vertical: Horizontal 59�/72�

1800

1500

1200

900

600

300

Cd / 1000 lm

0

-90� -60� -30� 0� 30� 60� 90�

Lamp: Lamp: 250W 2000W HPS-T position HQI TS 1 (long arc) positionVertical 3

I max: I max: 854 cd/1000 1514 cd/1000 lm I peak: lm I 67� peak: 56° Horizontal

I max/2: Horizontal: Vertical 2 x 31� Vertical: Horizontal 59�/72�

1800

1500

1200

900

600

300

Cd / 1000 lm

Cd / 1000 lm

0

-90� -60� -30� 0� 30� 60� 90�

Lamp:

Lamp:

250W

2000W

HPS-T position

HQI TS

1

(long arc) position

Vertical

4

I max: I max: 854 cd/1000 1330 cd/1000 lm I peak: lm I 67� peak: 56° Horizontal

I max/2: Horizontal: Vertical 2 x 31� Vertical: 59�/72� Horizontal

Lighting people and places

59

OUTDOOR

AREA AND SPORTS FLOODLIGHTING


60

Mundial

A high specification, high

performance discharge

floodlight ideal for sports field

and stadium lighting, both

indoor and outdoor

MUNC MUNR symmetric

Lighting people and places

• Choice of lamps giving

flexibility in lumen package, Ra

index and colour temperature

• Computer optimised optical

systems - asymmetric

distribution for side lighting

• Available in standard and

“extensive” extra wide

distribution

• Bird spike available to

special order

660

550

260

HQI-TS/S (MD) 2kW

MHN-LA (MD) 2kW

HIT (MT) E40 1kW

HIT-DE (MD) Rx7s 1.5-2kW

HST (ST) E40 1kW

AS/NZS60598 Class II Electrical

10 Nm Impact resistant - Glass

2 Nm Impact resistant - Connection box

IP65

• Low glare, spill and upward

light preventing light pollution

• Easy installation and

maintenance with rear

access and automatic power

interruption

• IP65 dust tight and waterproof

• Hot restrike versions available

• Variable lampholder position

enables choice of distribution

Materials/Finish

Body and frame: die-cast

aluminium.

Front glass: thermal resistant

4mm clear glass.

Stirrup: unpainted

galvanised steel.

Hood and louvre: black

aluminium.

Installation/Mounting

Stirrup fixed by single M20

bolt through Ø22mm central

hole, or twin bolts through

Ø15mm holes.

Cable clamp supplied for

Ø7.5-13mm flexible cable.

Ignitor mounted on floodlight.

Control gear to be selected and

mounted remotely.

Hood accessory fixes via

4 screws.

Optical Systems

Cylindrical parabolic reflector

with baffle and three lamp

positions for range of lamps.

Specification

To specify state:

Standard/Hot restrike/floodlight

for 1/1.5/2/kW linear metal

halide lamps, in die-cast

aluminium with asymmetric/

symmetric optical system

including baffle with three lamp

positions (narrow, medium and

wide photometric distribution).

Rear access to the lamp with

automatic power interruption.

IP65. Class II insulation.

As Thorn Mundial.

Windage: 0.5m 2

www.thornlighting.com.au


Ordering Guide Lamps to be ordered separately. For complete fitting please order

floodlight and gear tray.

Description

Mundial C, asymmetric floodlight

Ilcos Code Socket Wt (kg) SAP Code

MUNDIAL C MHN-LA 2KW WI MD - 14.5 96009880

MUNDIAL C EXTENSIVE MHN-LA 2KW WI MD - 14.5 96012046

MUNDIAL C HIT-DE (SPL OR MBIL/H) 2KW WI MD RX7S 14.5 96011294

MUNDIAL C HQI-TS OR HSI/TD 2KW WI MD - 14.5 96002378

MUNDIAL C HIT-DE (SPL OR MBIL/H) 1.5KW WI MD RX7S 14.5 96011344

MUNDIAL C HST/HIT 1KW NI

Gear tray

ST/MT E40 14.5 96002377

CG TM 1KW HIT 240V WI FUSED 96038292

CG TM 1KW HIT 415V WI FUSED 96038293

CG WP 1KW HIT 240V WI FUSED 96038294

CG WP 1KW HIT 415V WI FUSED 96038295

CG TM 1KW HST 240V WI FUSED 96038296

CG TM 1KW HST 415V WI FUSED 96038297

CG WP 1KW HST 240V WI FUSED 96038298

CG WP 1KW HST 415V WI FUSED 96038299

CG TM 1.5KW MBIL 240V NI FUSED 96038301

CG TM 1.5KW MBIL 415V NI FUSED 96038302

CG WP 1.5KW MBIL 240V NI FUSED 96038303

CG WP 1.5KW MBIL 415V NI FUSED 96038304

CG TM 2KW HQI/MBIL 415V NI FUSED 96038305

CG WP 2KW HQI/MBIL 415V NI FUSED 96038306

CG TM 2KW MHNLA 415V NI FUSED 96038307

CG WP 2KW MHNLA 415V NI FUSED

Attachments

96038308

MUNDIAL VS HOOD ATTACHMENT 96061608

MUNDIAL LV HOOD/LOUVRE 96008489

Symmetric versions available to special order

TM - Tray mounted, WP - Weatherproof, WI - With ignitor, NI - No ignitor

www.thornlighting.com.au

Intensity

1800

1500

1200

900

600

300

cd/1000 lm

0

-90 -60 -30 0 30 60 90

Angle from peak

Mundial

Cat. No.

C asymmetric

MUNC2000DEPMD

Horizontal

horizontal

Lamp: Lamp: 2kW 2000W HIT-DE MHN-LA, position 2 vertical

Vertical

Beam data

Peak intensity (l) cd/klm 1800

Beam factor to 10% peak (l) 0.67

Beam angle toMUNDIAL 10% of peak (l) Horizontal 2 x 42°

Vertical 6°/53°

Beam angle to 50% of peak (l) Horizontal 2 x 29°

Vertical 3°/20°

Beam angle to 1% of peak (l) Horizontal 2 x 55°

Vertical 69°/66°


I peak

Lighting people and places

AAMI Stadium, Melbourne, VIC

61

OUTDOOR

AREA AND SPORTS FLOODLIGHTING


62

Gear Combination Table

Great care needs to be taken

when selecting control gear,

as certain gears are only

compatible with certain lamps

All standard assembled control gear used throughout this catalogue

utilises high quality components. For more demanding installations,

specialist control gear is available on request through your local

Thorn office.

Lighting people and places

Standard Gear

Standard gear incorporates

precision wound ballast multi

tapped. Available in both

weatherproof and tray mount

options, suitable for a wide

range of installations.

High Specification Gear

(HS Gear)

High Specification gear is

designed to provide the end

user with a gear product which

will meet the demanding needs

of more arduous conditions.

The fully sealed weatherproof

gearbox is manufactured of

die cast aluminium and is

powdercoated.

HS ballasts have tappings which

allow adjustment for both high

and low supply.The ballasts

are designed to optimise lamp

performance and life.

Stainless steel gear trays

minimise the possibility of

corrosion when in harsh

environments.

For more information or support

in selecting the right control gear

combinations, please contact

your local Thorn office.

Gear Mundial Champion Munaline OSQ SAP Code

HQI MHNLA MBIL HIT HST HQI MHNLA MBIL HST MHNLA

1KW

TRAY MOUNT 1KW HPST/HQI/MHNLA 240V NO IGNITOR FUSED • • • 96038288

TRAY MOUNT 1KW HPST/HQI/MHNLA 415V NO IGNITOR FUSED • • • 96038289

WEATHERPROOF 1KW HPST/HQI/MHNLA 240V NO IGNITOR FUSED • • • 96038290

WEATHERPROOF 1KW HPST/HQI/MHNLA 415V NO IGNITOR FUSED • • • 96038291

TRAY MOUNT 1KW HPIT 240V WITH IGNITOR FUSED • 96038292

TRAY MOUNT 1KW HPIT 415V WITH IGNITOR FUSED • 96038293

WEATHERPROOF 1KW HPIT 240V WITH IGNITOR FUSED • 96038294

WEATHERPROOF 1KW HPIT 415V WITH IGNITOR FUSED • 96038295

TRAY MOUNT 1KW HPS 240V WITH IGNITOR FUSED • 96038296

TRAY MOUNT 1KW HPS 415V WITH IGNITOR FUSED • 96038297

WEATHERPROOF 1KW HPS 240V WITH IGNITOR FUSED • 96038298

WEATHERPROOF 1KW HPS 415V WITH IGNITOR FUSED • 96038299

WEATHERPROOF 1KW CSI 240V NO IGNITOR

1.5KW

• 96038300

TRAY MOUNT 1.5KW MBIL 240V NO IGNITOR FUSED • 96038301

TRAY MOUNT 1.5KW MBIL 415V NO IGNITOR FUSED • 96038302

WEATHERPROOF 1.5KW MBIL 240V NO IGNITOR FUSED • 96038303

WEATHERPROOF 1.5KW MBIL 415V NO IGNITOR FUSED

2KW

• 96038304

TRAY MOUNT 2KW HQI/MBIL 415V NO IGNITOR FUSED • • • • 96038305

WEATHERPROOF 2KW HQI/MBIL 415V NO IGNITOR FUSED • • • • 96038306

TRAY MOUNT 2KW MHNLA 415V NO IGNITOR FUSED • • • 96038307

WEATHERPROOF 2KW MHNLA 415V NO IGNITOR FUSED • • • 96038308

www.thornlighting.com.au


IMAGE TBC

AAMI Stadium image - waiting on image.

www.thornlighting.com.au

Lighting people and places

AAMI Stadium, Melbourne, VIC

63

OUTDOOR

AREA AND SPORTS FLOODLIGHTING

More magazines by this user
Similar magazines