atw 2015-01

inforum

atw Vol. 60 (2015) | Issue 1 ı January

AMNT 2015 40

Fast Neutron Detection With sic Semicoductor

Detector at Elevated Temperatures

Dora Szalkai, Karlsruhe Institute of

Technology, Germany

Surface Finish Influence on the Thermal

Shock Performance of Beryllium

Benjamin Spilker, Forschungszentrum Julich

GmbH, Germany

Creep Irradiation Testing of Copper Alloy for

the ITER First Wall Panels

Christoph Pohl, TUV Rheinland Industrie

Service GmbH, Germany

Campus Nuclear Energie

Wednesday ı May 6 th 2015

Workshop Preserving

Competence

Wednesday ı May 6 th 2015 &

Thursday ı May 7 th 2015

Key Topic

Enhanced Safety &

Operation Excellence

Topical Session

Sustainable Reactor

Operation Management –

Safe, Efficient and Valuable

Tuesday ı May 5 th 2015

Coordinator: Dr. Erwin Fischer, E.ON Kernkraft

GmbH, Germany

Every operator of a nuclear power plant

worldwide strives for safety, efficiency and

adding value. But what are the key factors to

achieve these goals? For sure, the technological

standards and herewith continuous investments

in maintenance and technological

development are essential. Of course, a strict

and sound regulation with an independent

authority of highest expertise is crucial, too.

In this context this session provides an overview

over best practices and state of the art

scientific findings on the relevant topics in

the field of efficient organization and responsible

human performance. Questions of

management systems, organizational setup

are being presented and discussed as well as

aspects of incorporating lessons learned and

training.

Organisational and Regulatory

Background

Welcome/Opening Remarks

Dr. Erwin Fischer

E.ON Kernkraft GmbH, Germany

Management System and Organisational

Setup as Determinants for a Successful

Performance of Plant Staff

Jürgen Schwarzin, E.ON Kernkraft GmbH,

Germany

Health, Safety and Environment – First!

Matthias Röhrborn , RWE Power AG,

Germany

Environmental Management – How to Deal

with EMAS and OSAS?

Dr. Johann Oswald, NPP Isar, E.ON Kernkraft

GmbH, Germany

Procedures Incorporating

Lessons Learned

The Process of Evolving Improvement with

Feedback of Experience in a NPP

Ulrich Sander, NPP Neckarwestheim, EnBW

Kernkraft GmbH, Germany

German Information Notices – Interdisciplinary

Event Assessment Resulting in

Recommendations

Dr. Dagmar Sommer, Gesellschaft für Anlagenund

Reaktorsicherheit (GRS) mbH, Germany

The “Human Factor”

Developing and Preserving Requisite

Qualification – Training at a Simulator

Jochen Kruip, KSG Kraftwerks-Simulator-

Gesellschaft mbH, GfS Gesellschaft für

Simulatorschulung mbH, Germany

Tools Supporting Human Performance

Dr. Stephan Rahlfs, NPP Philippsburg, EnBW

Kernkraft GmbH

Frank Heinrich, E.ON Kernkraft GmbH,

Germany

Focus Session

Radiation Protection

Tuesday ı May 5 th 2015

Coordinator: Erik Baumann, AREVA GmbH,

Germany

Radiation Protection – a century of safety

benefit for jobholders, public and environment.

The development of protection principles

is a long lasting process. It started with

the increasing industrial application of X-rays

more than 100 years ago. Today, there is a

large number of national and international

organization and governmental institutions

dealing with the protection of occupationally

exposed workers, of members of the public

and of the general environment. This session

presents the most recent status of discussions

and developments in the fields of radiation

protection during decommissioning,

development of codes, standards and regulations.

In Fact, it Protection of Human Beings and

the Environment Against Ionizing Radiation

– Some Historical Insights

Erik Baumann, AREVA GmbH, Germany

ALARA – How Much Radiation Protection is

Reasonable?

Dr. Gerhard Frank, Karlsruher Institut of Technology

(KIT), Germany

Radiological Protection Targets and

Performance Indicators

Gabriele Hampel, AXPO Power AG,

NPP Beznau, Switzerland

Dose Rate Measurements at the Presence of

Surface-near Sources

Sinisa Simic, TO.M.MA.S GmbH, Germany

Incorporation Monitoring of Intakes During

the Dismantling of Nuclear Facilities

Martina Froning, Forschungszentrum Jülich

GmbH, Germany

Decommissioning Aspects – EC and IAEA

Guidance on Exemption and Clearance Levels

and Implications on Clearance in Germany

Dr. Stefan Thierfeldt (tbc), Brenk

Systemplanung GmbH, Germany

Topical Session

Fuel Management During the

Last Cycles and Beyond

Wednesday ı May 6 th 2015

Coordinators: Ulf Benjaminsson,

Carina Önneby, Westinghouse Electric

Sweden AB, Sweden

Many utilities are currently facing a situation

where the fuel and core components are to be

effectively managed during the last cycles of

operation and beyond. A key aspect is the experiences

and strategies for core and fuel optimization

with regard to flexibility and fuel

cycle costs. With the completion of the operation,

utilities must consider whether to reuse or

dispose any residual fresh fuel assemblies. Disposal

of other core components, such as control

rods and BWR fuel channels is also to be

performed. Moreover, damaged fuel rods remaining

at the plant are to be prepared for safe

transportation and disposal. Finally, fuel suppliers

and utilities jointly have to ensure that the

depleted fuel assemblies can be safely stored in

dry storage facilities before final disposal.

Fuel Related Experiences and Lessons Learend

from Barsebäck 1 and 2.

Fredrik Winge (tbc), Vattenfall/Ringhals, Sweden

Strategies and experiences from using the

fuel as effectively as possible within EKK

Wolfgang Faber, E.ON Kernkraft GmbH,

Germany

AMNT 2015

Programme

More magazines by this user