SPECIAL PRICES! - Chiron

Rotiprotect ® -
Latex gloves
powder free
Acc. to EN 420, corresponds to EN 455.1,
EN 374 and ASTM-F 1671-97. AQL 1.5.
Comply with the requirements of
the Foodstuffs and Commodotoes
Law, EU-Regulation 1935/2004.
Size Art. No. Pack Qty. €
S (6-7) L949.1 100 8,10
M (7-8) L950.1 100 8,10
L (8-9) L951.1 100 8,10
XL (9-10) HE61.1 90 8,10
With 10 boxes of each size
Internally lined,
textured surface
TOP-Offers in this mailing Contents
• CE Category III,
protected from complex risks
• Intensive washing processes ensure gloves
contain low levels of protein and irritants
•Thiuram-free
• Very smooth and pleasantly soft
•Length ≥ 240 mm
• Inside surface: smooth, internally lined
• Wall thickness, double: approx. 0.25 mm
• 100 or 90 units in a dispenser carton
€ 7,55 each box!
RS-series test tube shakers p. 3
Dispensette ® TA p. 7
pipetus ® storage battery operated
pipetting aids p. 13
Rotilabo ® -microliter pipettes
Proline ® , variable p. 17
RBS ® -cleaner p. 19
Desktop pH-/mV-/°C meter p. 25
Apiezon ® -lubricants p. 27
SPECIAL PRICE
when you buy 10 boxes of each size!
Centrifuge tubes and bottles p. 12
Filtration p. 28
Laboratory appliances p. 4, 5, 14, 15
Laboratory equipment and aids p. 6, 10, 22, 23
Laboratory safety p. 30
Liquid Handling p. 16
Measuring technology pH p. 24, 26
Microbiology p. 2
Microscopes and accessories p. 11
Safety protection p. 8-10
Sampling p. 18-21
Storage of light sensitive samples p. 31
Vacuum-laboratory p. 29
Low prices at ...
Valid from 4. oct.
to 31. dec. 2011

Microbiology
SPECIAL PRICES! SPECIAL PRICES!
Petri dish revolving tables sensorturn
Sensor-controlled. For uniform and individual inoculation / plating of Petri
dishes. Stainless steel enclosure. Stainless steel revolving plate with
silicone insert, for Petri dishes with a diameter of max 103 mm (optional max
∅ 150 mm, not included in delivery, please order separately). Revolving
plate can be switched on/off with hand movement via non-contact IR-sensor
technology or optionally with foot switch (not included in delivery,
please order separately). UV-resistant. Can be burnt.
Technical specifications:
Type ➀ sensorturn ➁ sensorturn pro
Speed control, infinitely variable 14 to 120 min-1 14 to 210 min-1 Detection range IR-sensor 5 to 50 mm, adjustable
Revolving time adjustable from 1 m 1 to 25 s or permanent operation
Power supply 10 V DC / 6 VA
Protection class II
Dimensions (L x W x H) 103 x 60 x 150 mm
Delivery incl. power unit.
Type Art. No. Pack Qty. €
➀ Petri dish revolving table sensorturn AP09.1 1 220,40
➁ Petri dish revolving table sensorturn pro KA27.1 1 252,65
Accessories:
Foot switch made of stainless steel
(cable length 3 m)
Stainless steel revolving plate for Petri dishes
∅ 150 mm
Cordless radio-controlled foot switch made of
stainless steel
Tray e.g. for 3 inoculating loops or
Drigalski spatulas
AN88.1 1 37,10
KA28.1 1 44,65
KA29.1 1 106,45
KA30.1 1 25,30
Bacterial cell spreader DeltaTM Made of ABS. Sterile (packed individually). With smooth surface, prevents
scratching of agrar surfaces. Delta-shaped head distributes the contact
pressure evenly for a smooth application.
Dimensions: L 172 x W 37 x ∅ 4 mm.
Art. No. Pack Qty. €
PC59.1 500 68,25
2
S
NEW
at Roth
Electroporation cuvettes
Cuvette made of PC, electrodes made of aluminium. Manufactured under
clean-room conditions, individually packed. In 3 column widths, 1, 2 and
4 mm. Colour-coded lids according to column width. Compatible with most
electroporation systems (Bio-Rad ® , BTX ® , Invitrogen ® , Eppendorf and
Kodak ® /IBI ® ), and many more.
Column width (mm) Lid colour Art. No. Pack Qty. €
1 orange PP38.1 50 118,25
2 green PP39.1 50 118,25
4 black PP40.1 10 30,10
Petri dishes
Made of transparent PS. Sterile or unsterile. The plane base enables
stacking and a high stability. Ideal for work in microbiology and bacteriology
labs. Excellent optical clarity.
Available in two qualities:
• With ventilating cam for optimal gas exchange
• Without ventilating cam for long incubation period at 37 °C
Sterile (gamma-sterilized)
∅ (mm) Height (mm) Design Art. No. Pack Qty. €
90 14 with vents N221.2 825 (25 x 33) 107,00
90 16 without vents EN16.1 480 (24 x 20) 72,60
55 15 with vents N223.2 1620 (108 x 15) 143,00
55 15 without vents N224.2 1620 (108 x 15) 143,00
Produced under low-germ conditions
∅ (mm) Height (mm) Design Art. No. Pack Qty. €
35 10 with vents EL46.1 740 (74 x 10) 117,20
60 15 with vents EL47.1 600 (30 x 20) 65,85
94 16 with vents EL48.1 480 (24 x 20) 46,80
94 16 without vents EL45.1 480 (24 x 20) 46,15
145 20 with vents EL49.1 120 (8 x 15) 47,85
SPECIAL PRICES!
Subdivided petri bowls
Made of PS, transparent. Produced under almost germ-free conditions.
For multi-purpose use in microbiology and bacteriology labs.
Can be stacked easily. With ventilation cams. Dimensions: ∅ 94 x H 15 mm.
Model Volume/Well (ml) Art. No. Pack Qty. €
subdivided in 2 sections 20 EP50.1 480 (24 x 20) 59,15
subdivided in 3 sections 12 EP51.1 480 (24 x 20) 59,15

TOP-OFFER
RS-series
test tube shakers
For mixing small sample quantities in test tubes,
centrifuge tubes, reaction vials etc.
General information on both models
• Continuous / touch operation
• Robust housing design
• Slip-resistant silicon feet
• Dimensions: W 127 x H 160 x D 130 mm
• Mains connection 220-230 V, 50 Hz
RS-VF 10
With fixed speed of 2500 rpm
RS-VA 10
With variable speed control from 0 to 2500 rpm
Delivery incl. standard attachment for test tubes
and small containers.
Type Art. No. Pack Qty. €
RS-VF 10 PX87.1 1 85,95
RS-VA 10 PX88.1 1 134,35
NEW
at Roth
SPECIAL PRICES!
The irreplaceable
helpers in every lab !
3

Heating appliances
Small incubator Heratherm IMC18
• With Peltier cooling
• Interior lighting facilitates sample monitoring
• Fan for air circulation; runs permanently and is not adjustable
Technical specifications:
Capacity 18 l
Temperature range 17 to 40 °C
Resolution of temperature display 1 °C
Temperature deviation at 37 °C temporal: ±0.2 °C, spatial: ±1.2 °C
Inner dimensions (W x H x D) 180 x 310 x 290 mm
Outer dimensions (W x H x D) 260 x 415 x 470 mm
Mains connection
Delivery incl. 2 removable inserts.
100-240 V, 50/60 Hz
Art. No. Pack Qty. €
PL74.1 1 600,00
SPECIAL PRICE!
Single-block thermostat Accublock TM Mini
For precision temperature control of 12 1.5 ml reaction vials.
• Digital display of actual temperature
• Acoustic timer adjustable from 1 min to 19 h, 59 min (has no effect on
heater performance; no shutdown upon expiration of the timer)
• Integrated aluminium block; ports have been adapted to fit 1.5 ml reaction
vials
Technical specifications:
Delivery incl. AccuRackTM Operating temperature range 5 °C above ambient temperature up to 100 °C
Temperature adjustment range 20 to 101 °C
Resolution 0.1 °C
Temperature accuracy ±0.2 °C
Heating-up time approximately 20 min to 100 °C
Dimensions (W x D x H) 110 x 140 x 55 mm
Weight 1.4 kg
Mains connection 230 V, 50/60 Hz
for fast loading and unloading of reaction vials.
Art. No. Pack Qty. €
PE74.1 1 253,70
4
NEW
at Roth
NEW
at Roth
SPECIAL PRICE!
Bunsen burner LABOGAZ 470
For use with cartridge CV 470.
Dimensions without cartridge: ∅ 22 mm, height 59 mm.
Delivery without cartridge (please order separately).
Art. No. Pack Qty. €
Y650.1 1 48,40
Valve cartridges CV 470
For bunsen burner LABOGAZ 470. Butane/propane-mix (80/20 %).
l Danger H220
Model Contents ∅ (mm) Height (mm) Art. No. Pack Qty. €
CV 470 450 g 109 135 Y652.1 2 20,35
CV 470 450 g 109 135 Y652.2 12 112,90
Water baths Aqualine
For working temperature range 30 to 95 °C.
• Inside tub made of stainless steel
• With digital temperature display
• Integral excess temperature protection
Technical specifications:
Model
Useable space
AL 2 AL 5 AL 12 AL 18 AL 25
Volume (l) 1.7 5 11.7 18.2 25.2
Bath opening (mm) 300 x 151 329 x 300 505 x 300 505 x 300
Bath depth (mm)
Units
65 150 150 150 200
Width (mm) 343 343 372 548 548
Depth (mm) 186 186 335 335 335
Height with lid (mm) 290 290 325 325 375
Temperature constancy (±K) 0.2
Power supply 230 V, 50/60 Hz
Delivery incl. roof-shaped lid for bath made of plastic. Prevents condensed
water from dripping into the samples when opening the lid.
Type Art. No. Pack Qty. €
AL 2 HA67.1 1 520,00
AL 5 HA68.1 1 535,00
AL 12 HA69.1 1 595,00
AL 18 HA70.1 1 695,00
AL 25 HA71.1 1 755,00

Mixer
NEW
Tilting mixers Speci-Mix and Vari-Mix
for sample tubes
For gentle, tilt-mixing of samples in sample tubes
Speci-Mix: with fixed speed 18 rpm and fixed tilt angle of 48°
Vari-Mix: with variable speed control in the range 2 to 20 rpm and manual
tilt angle setting from 1 to 48°
Silicone attachment can be used on both sides. A closing lip integrated on
one side prevents short tubes from slipping (L

Laboratory aids
Spoon spatulas
Made of stainless steel 18/10.
➀ Autoclavable
Length (mm) Spoon W x L (mm) Plate W x L (mm) Art. No. Pack Qty. €
120 31 x 23 30 x 20 PH56.1 1 3,20
150 38 x 27 32 x 22 PH57.1 1 3,80
180 40 x 28 32 x 22 PH58.1 1 4,20
210 40 x 28 32 x 22 PH59.1 1 4,85
250 50 x 35 45 x 32 PH60.1 1 7,45
300 55 x 41 50 x 37 PH61.1 1 9,60
➁ With PTFE coating
Length (mm) Spoon W x L (mm) Plate W x L (mm) Art. No. Pack Qty. €
180 40 x 28 32 x 22 PH62.1 1 24,70
Test tube racks
Made of stainless steel 18/10. Autoclavable.
Adapter racks Hole ∅ (mm) L x W x H (mm) Art. No. Pack Qty. €
2 x 6 17 145 x 52 x 90 PH51.1 1 30,45
2 x 12 17 278 x 52 x 90 PH52.1 1 33,35
4 x 12 17 287 x 97 x 90 PH53.1 1 57,55
2 x 6 20 164 x 60 x 90 PH54.1 1 38,70
2 x 12 20 310 x 60 x 90 PH55.1 1 49,70
Rotilabo ® -cards
Blank for laboratory purposes, e.g. can be used as weighing blades
or scratchers.
Art. No. Pack Qty. (kg) €
1656.1 1 11,85
6
NEW
at Roth
NEW
at Roth
Forceps with guide pin
Made of Remanit 4301. Fine model. Autoclavable.
➀ Straight
Length (mm) Art. No. Pack Qty. €
105 LT35.1 1 5,60
130
➁ Bent
LT36.1 1 5,85
Length (mm) Art. No. Pack Qty. €
105 LT37.1 1 6,05
130 LT38.1 1 6,40
Stirring spatulas
Made of PS, transparent.
Length 120 mm, flat end: length 30 mm, width 3 mm.
Art. No. Pack Qty. €
4893.2 500 8,55
Sarogold ® -foil
Made with a base of vinylidene chloride. With excellent protecting qualities.
Foil does not stick and is easy to unroll.
Foil does not burn, is self-extinguishing.
Approved for foodstuffs and microwaves.
Technical specifications:
Foil thickness 11.5 μm
Permeability in visible range 90 %
UV-filtering 3000 Å
IR-permeability
Delivery incl. cutter, with box.
88 %
SPECIAL PRICE!
SPECIAL PRICE!
Width (mm) Length (m) Art. No. Pack Qty. (roll) €
300 300 9068.1 1 37,65
❄

TOP-OFFER
Dispensette ® TA
For dispensing highly pure chemicals.
INTRODUCTORY PRICES!
Suitable for use in trace analysis.
Discharge of metal traces is normally below ppb range
or even in the ppt range depending on application.
• Interchangeable valves made of high-purity Al 2 O 3
sapphire
• Springs are made of platinum-iridium or tantalum
• The established cleaning process for use in trace analysis
is explained in the instructions for use
• Safety Prime TM recirculation valve prevents loss of
reagent and allows quick, bubble-free ventilation
• To avoid contamination of the bottle contents,
the device is optionally available without a recirculation
valve
• Valve block can be rotated through 360° so the bottle label
is always visible
• Dispensing plunger with snug fitting seal. The complete
dispensing unit can easily be replaced by the user in the
event of wear
• Conditions of use: max. vapour pressure 600 mbar,
kinematic viscosity up to 500 mm 2 /s, max. temperature
40 °C, max. density 3.8 g/cm 3
• GL 45 thread, adapter for standard reagent bottles
NEW
at Roth
Parts in contact with media are made of highly pure PTFE,
ETFE, FEP and PFA.
Delivery incl. certificate of quality, dispensing syringe,
telescopic suction tube, SafetyPrime recirculation valve
and recirculation tube (optional), assembly spanner and
adapter for bottle threads GL 28 / S 28 (ETFE), GL 32
(ETFE) and S 40 (PTFE).
Dispensette ® TA
with SafetyPrime TM recirculation valve
Valve Capacity Gradua- Tolerance Art. No. Pack €
spring (ml) tion (ml) (±ml)
Qty.
Platinumiridium
10 0.2 0,7 PP72.1 1 517,75
Tantalum 10 0.2 0,7 PP73.1 1 517,75
7

Protective clothing
Uvex sil-wear disposable overalls
• Hood is highly compatible with protective face masks
• Middle finger loops prevent the sleeves from riding up,
e.g. during overhead work
• Silicone-free
• Antistatic to EN 1149-1
• Suitable for clean rooms
➀ Type 5/6, white/lime
Breathable PE laminate with air-permeable SMS back for excellent
moisture management and breathability. With bound seams for effective
protection against chemical splashes and particles.
Uses:
• Working with powdery chemicals
• Painting and lacquering
• Glass fibre production and processing
• General maintenance work
Size Art. No. Pack Qty. €
M PP20.1 1 13,45
L PP21.1 1 13,45
XL PP22.1 1 13,45
XXL PP23.1 1 13,45
XXXL
➁ Type 4B, white/orange
PP24.1 1 13,45
Made of breathable, lightweight and flexible material for wear comfort. Selfadhesive
zip cover and bound seams provide protection against
penetration of liquid aerosols and particles. Tested for protection against
pesticides according to DIN 32781.
Uses:
• Handling of low-toxic inorganic chemicals
• Industrial cleaning work using low pressures (spray)
• Shipbuilding and automobile manufacturing
• Handling of paints and lacquers
• Agriculture and horticulture
• Electronics
Size Art. No. Pack Qty. €
S PP25.1 1 14,85
M PP26.1 1 14,85
L PP27.1 1 14,85
XL PP28.1 1 14,85
XXL PP29.1 1 14,85
XXXL PP30.1 1 14,85
8
NEW
at Roth
SPECIAL PRICES!
Sekuroka ® -lab aprons
Made of sturdy proofed fabric on both sides.
Light and pliable, yet extremely stable. Can be cut if required.
Length (mm) Width (mm) Art. No. Pack Qty. €
1100 900 1806.1 1 38,50
1200 900 H589.1 1 38,50
Sekuroka ® -disposable overshoes
Made of textured PE film. Interchangeable. Colour: blue.
L x W (mm) Design Art. No. Pack Qty. €
360 x 150 Standard 1258.1 100 5,35
410 x 150 Large PK96.1 100 6,25
Sekuroka ® -protective sleeves, air-permeable
For the food industry. Colour white. Length 45 cm.
Model ➀ Made of PP-fleece, 30 g/m2 . Elastic bands on both ends.
Air-permeable and moisture repellent.
Model ➁ Made of SMS-fleece, 55 g/m2 , PE-coated inside.
With elastic band on one end and soft knitted cuff on other.
Allows skin to breathe and are moisture repellent.
Type Art. No. Pack Qty. €
➀ LH96.1 500 (5 x 100) 60,95
➁ LH97.1 100 29,05

Eye protection
NEW
at Roth
Safety goggles SP1000 TM
In acc. with EN 166 and EN 170. Offers effective protection from chemical
splash, impact, wind, dust and flying particles. With black frame and clear
PC lens. Weight 50 g.
• With Dura-streme dual anti-fog/anti-scratch coating
• With indirect ventilation at the top and bottom
• High-quality foam-padded frame for first-class comfort and sealing
• Soft and flexible nose pads for easy fitting to a variety of face shapes
• Padded ear-piece tips for all-day wear comfort
• Flexible design: can be used with ear pieces or adjustable headband.
Delivery incl. ear pieces and headband.
Art. No. Pack Qty. €
PT41.1 1 21,45
NEW
at Roth
Full vision goggles carbonvision SV extreme
By UVEX. In acc. with EN 166 and EN 170. Also suitable for work with UV
light. Colourless, scratch-proof and anti-fog PC visor. Excellent mechanical
stability with high-grade, long-life headband. Very light full-vision goggles
combinable with respiratory protection and safety cap. Weight 46 g.
Art. No. Pack Qty. €
PP31.1 1 19,15
NEW
at Roth
Full vision goggles 2890
By 3M. In acc. with EN 166, EN 170. Also suitable for work with
UV light. Clear, scratch-proof and non-fogging PC lens. Indirect ventilated.
Can be worn over most prescription spectacles using grooves on each side.
Wide adaptable headband with adjustable joints for perfect fit.
Good compatibility with 3M half masks. Weight 41 g.
Art. No. Pack Qty. €
PT44.1 1 12,40
NEW
at Roth
Safety goggles ALEXIATM In acc. with EN 166, EN 170 and EN 172 (PT42.1). Also suitable for work
with UV light. Lens made of PC. Models developed specifically for women
(reduced width, shorter earpieces and slimmer nose piece). Crystal accents
on each side of the lens. Weight 30 g.
Frame colour Lens design Art. No. Pack Qty. €
clear, frosted clear, scratchproof, anti-fog PT40.1 1 10,25
brown, frosted brown tinted, scratchproof PT42.1 1 10,25
NEW
at Roth
UV face visor SPHERE
In acc. with EN 166, EN 170. Also suitable for work with UV light.
• Lens made of PC (2.0 mm thick), frame made of PP
• Large field of vision of 180°
• Adjustable headgear and headband
• Protection from chemical splashes
• Protection from medium energy particles (120 m/s), tested at extremely
high temperatures
• Protection from hot solids and molten metals
Weight 355 g. Lens size: H 394 x W 205 mm.
Type Art. No. Pack Qty. €
UV face visor SPHERE PT74.1 1 21,45
Spare lens for UV face visor SPHERE PT74.1 PT75.1 1 12,05
9

Body showers and accessories Stools and chairs
Body shower Model 1
DVGW certified. For wall assembly, surface inlet pipe. Wall flange
mounting. Is triggered off by pull-rod valve, which does not close
automatically. Connection ¾″ female thread, overhang 625 mm,
pull-rod length 700 mm.
Art. No. Pack Qty. €
EP70.1 1 203,20
Sekuroka ® -shower tester
For easy checking of body showers. Consists of: synthetic hose with
stitched-in opening ring, upper ∅ 28 cm, lower ∅ 12 cm, length 180 cm.
20 liter plastic bucket. Metal telescopic rod, length 80 to 130 cm.
Art. No. Qty. (set) €
T348.1 1 149,45
10
SPECIAL PRICES!
Stool, standard models
• Infinitely variable adjustment of seat height
• Seat made of extremely robust PU-foam or beechwood
• Beechwood seat with circular trigger
• Extremely robust plastic cross-shaped base
• With safety gas spring for quick adjustment of seat height
• LGA-tested
Model Seat Seat height (mm) Art. No. Pack Qty. €
Runners PU black 400-600 Y702.1 1 80,65
Castors PU black 420-620 Y703.1 1 86,00
Runners Beech natural 400-600 Y704.1 1 80,65
Castors Beech natural 420-620 Y705.1 1 86,00
Office chair, standard models
Acc. to DIN 68877.
• Seat and backrest made of PU foam or beechwood,
ergonomically designed
• Backrest adjustment and seat height adjustment infinitely variable
• Depth of seat can be adjusted
• Safety gas spring with spring suspension for depth
• All double rollers have a load-controlled brake, suitable for hard
and soft floors
• PU-moulded parts with steel core
• Stable and robust plastic cross-shaped base
Model Seat and back Seat height Art. No. Pack Qty. €
rest
(mm)
Runners PU black 400-600 Y708.1 1 123,65
Castors PU black 420-620 Y709.1 1 129,00
Runners Beech natural 400-600 Y710.1 1 102,15
Castors Beech natural 420-620 Y711.1 1 112,90

Microscopes and accessories
Biology-microscopes B3 Professional series
• Total magnification: 40x, 100x, 400x, 1000x
• Bi- or trinocular head: 30° angular observation and 360° rotatable
• Oculars: wide-field 10x, visual view 20 mm, left ocular barrel with diopter
adjustment of ±5 dpt
• Lens turret:
5-times with four achromatic super-contrast-objectives
4x / N.A. 0.10
10x / N.A. 0.25
40x / N.A. 0.65 / S
100x / N.A. 1.25/ S-Oil
• Condenser: Can be brought into focus 1.25 N.A. Abbe-condenser, can
be focussed for Köhlersche lighting, with aperture diaphragm and filter
holders
• Pinion: Coaxialer coarse and fine pinion, height-adjustable, integral
mechanical stage
• Illumination: Köhler Halogen 12 V / 20 W, intensity of lighting is infinitely
adjustable with panel diaphragm
• Power supply: 220-240 V
Delivery incl. dust protection hood, mains cable, colour filter set and
immersion oil.
Type Head Art. No. Pack Qty. €
B3-220ASC Binocular CH56.1 1 597,45
B3-223ASC Trinocular CH57.1 1 692,60
Accessories for biology microscope B3
Wide-field eyepiece
Type Art. No. Pack Qty. €
Magnification WF 15 x (visible field 12 mm) CH58.2 1 pair 43,00
Graduated eyepiece, 10 mm scale divided into 100 increments
Type Art. No. Pack Qty. €
Magnification WF 10 x (for ASC) PC97.1 1 piece 64,50
CCD adaptor (0.5 x), for attaching a camera to the third tube of model B3-
223-ASC.
Type Art. No. Pack Qty. €
0.5 x CCD adaptor for !ß3″ chip, for Moticam 2300
+ 2500
CH59.1 1 piece 51,60
0.5 x CCD adaptor for !ß2″ chip, for Moticam 1000
Replacement bulb
PC98.1 1 piece 64,50
Type Art. No. Pack Qty. €
Halogen, 12 V / 20 W PC99.1 1 piece 8,40
SPECIAL PRICES!
Microscope cameras
Digital microscope camera with measuring software. The eyepiece adapter,
included in the delivery, enables the camera to be used with almost every
microscope. Connection via PC. Power supply of camera via USB.
Technical specifications:
Model ➀ Moticam ➁ Moticam ➂ Moticam
1000
2300
2500
Sensor format CMOS !ß3″ !ß2″ 1/2.5″
Front lens, focusable 12 mm / CCD 16 mm / CCD 12 mm / CCD
Pixel count 1.3 MP 3 MP 5.0 MP
Maximum resolution 1280 x 1024 2048 x 1536 2592 x 1944
Data transfer 480 MB/sec via USB 2.0
Sensitivity 3 Lux
Live photo measurement yes
Delivery incl. 4 eyepiece adapters (28, 30, 34 and 35 mm), additional
photo eyepiece with C-mount-connection (BS-adapter, only Moticam 2300
and 2500), USB 2.0 lead, macro-tube, calibrate scale and Motic Images 2.0
Software (System requirements: P4, 1 GHz processor or higher, free harddisk
storage 1 GB, 512 MB main memory, 64 MB graphic card, operating
system Windows XP/Vista/Win 7, Apple Mac OSX, USB 2.0 interface).
Type Art. No. Pack Qty. €
➀ Moticam 1000 CH60.1 1 320,90
➁ Moticam 2300 KA24.1 1 792,30
➂ Moticam 2500 KP33.1 1 991,15
Lens cleaning tissues
Clean without smearing, also remove dust and oil. 500 wipes per pack.
Art. No. Pack Qty. €
LH30.1 1 10,25
11

Centrifuge tubes and bottles
Oak Ridge centrifuge tubes with leak-tight closure
By Nalgene ® . Made of PC or PPCO. Screw closures made of PP with silicon
seal. For high speed centrifugation. Leak-proof. For use in cooled or
uncooled centrifuges up to 50 000 x g. Before centrifuging, tubes must be at
least 80 % full. Autoclavable. Before autoclaving, please make sure you
always unscrew the lid.
➀ Made of PC, transparent.
Capacity (ml) dia. x H (mm) Art. No. Pack Qty. €
10 16,1 x 82,3 PH96.1 10 62,90
16 18,2 x 106,9 PH97.1 10 77,40
30 25,7 x 101,6 PH98.1 10 103,20
50 28,8 x 115,0 PH99.1 10 107,00
➁ Made of PPCO (polypropylene copolymer), translucent.
Capacity (ml) dia. x H (mm) Art. No. Pack Qty. €
10 16,0 x 82,0 PK00.1 10 63,35
16 17,9 x 106,6 PK01.1 10 70,45
30 25,5 x 101,4 PK02.1 10 89,80
50 28,8 x 114,1 PK03.1 10 106,45
Leak-tight closures
for Oak Ridge centrifuge tubes
Screw closures from PP, with silicon seal. These enclosures ensure leakfree
use of Oak Ridge centrifuge tubes. Recommended for centrifugal
forces of 10 000 x g or higher. Autoclavable.
Height (mm) matches Art. No. Pack Qty. €
20 PH27.1, PH28.1, PH37.1, PH38.1,
PH98.1, PK02.1
PH43.1 2 17,00
24 PH29.1, PH39.1, PH99.1, PK03.1 PH44.1 2 19,00
Centrifuge bottles with leak-tight closure
By Nalgene ® . Wide-neck centrifuge bottle made of PC or PPCO. Screw
closure made of PP with silicon seal. Before centrifuging, bottles must be at
least 80 % full. 250 ml bottle centrifugable up to 27 500 x g, 500 ml bottle
centrifugable up to 13700 x g.
Autoclavable. Before autoclaving, always remove the lid and place the lid on
the bottleneck.
➀ Made of PC, transparent.
Nominal capacity Filling capacity ∅ x H Art. No. Pack Qty. €
(ml)
(ml)
(mm)
250 250 61,5 x 135,1 PH89.1 4 67,20
500 450 69,5 x 160,0 PH90.1 4 82,25
➁ Made of PPCO (polypropylene copolymer), translucent.
Nominal capacity Filling capacity ∅ x H Art. No. Pack Qty. €
(ml)
(ml)
(mm)
250 250 60,7 x 133,4 PH91.1 4 60,95
500 450 69,5 x 160,0 PH92.1 4 80,65
12
NEW
at Roth
NEW
at Roth
NEW
at Roth
Bottles for demanding applications
By Nalgene ® . Vacuum bottles made of PP, thick-walled. Screw cap made
of PP, white with TPE seal. Highly robust, evacuable wide-mouth bottle.
Vacuum-tight over 24 hours at 20 °C. Leak-proof. Suitable as vacuum trap
or as storage bottle for analytical or dispensing apparatus. Autoclavable.
Capacity (ml) dia. x H (mm) Closure size (mm) Art. No. Pack Qty. €
1000 93 x 226 53 PK40.1 1 23,65
2000 119 x 260 53 PK41.1 1 27,95
4000 155 x 338 83 PK42.1 1 45,70
5000 156 x 414 83 PK43.1 1 67,75
NEW
at Roth
Accessories: filling/vent caps
Made of PP, white, with 3 connections. For sterile liquid transfer of nutrient
media, biological reagents, pure water and chemicals. Usable with vacuum
bottles and belly bottles with cap sizes of 53 or 83 mm. Autoclavable.
Delivery incl. TPE seals, 2 platinum-coated silicone suction and
dispensing hoses, filling splash guard .
∅ x H Closure Connections for hoses with Art. No. Pack
€
(mm) size (mm) internal ∅ (mm)
Qty.
66.7 x 68,6 53 6,3 PK44.1 1 25,30
102 x 98 83 6,3 PK45.1 1 27,45
102 x 98 83 12,7 PK46.1 1 30,65
Tygon ® -tubes CR (R-1000)
Working temperature -73 to +52 °C, transparent, hardness 40 shore. Can
be gas sterilised in ethene oxide. Laboratory tube for peristaltic pumps,
extremely good chemical resistance. Very soft, remains flexible even at low
temperatures (to -73 °C). Easy to clean.
∅ inside ∅ outside Wall thickness Art. No. VE (m) €
(mm (inch)) (mm) (mm)
3,2 (!ß8) 6,4 1,6 H185.1 15 102,05
4,8 (#ß16) 8 1,6 H186.1 15 103,75
6,4 (!ß4) 9,6 1,6 H187.1 15 99,80
8,0 (%ß16) 11,2 1,6 H188.1 15 204,25
9,5 (#ß8) 12,7 1,6 H189.1 15 181,70
12,7 (!ß2) 15,9 1,6 H190.1 15 292,40

TOP-OFFER
pipetus ®
Storage battery operated pipetting aids
For pasteur-, graduated- and volumetric pipettes
with volumes between 0.1 and 200 ml
High powered accu:
continuous pipetting
up to 1 week
SPECIAL PRICE!
• Easy-to-read colour display for optical control of all functions
• Permanent battery capacity display
• Preset pipetting mode (EX or Blow-out)
• Display for set pipetting speed (5 speeds available)
• Safety check valve
• Non-stop working capacity up to 1 week
• Audible signal when battery capacity is under 10 %
• Recharging via charging station or directly with battery charger,
overload protection
• Pipettor can be sterilized (excluding PTFE-filter) at 121 °C
• Weight 200 g
Delivery incl. 2 sterile round filters, 1 safety valve, power pointcharger
and inductive charging station.
Art. No. Pack Qty. €
N472.1 1 354,75
13

Centrifuges
Microlitre centrifuges Heraeus ® Pico ®
and Fresco ®
General information for all models
• Max. capacity: 24 x 1.5/2.0 ml centrifuge tubes
• Heraeus ® Pico ® and the cooled Heraeus ® Fresco ® are each available in
the 17 000 x g- and 21 100 x g version
• Short brake and acceleration times
• Minimal running noise even at maximum speed
• LED-display for speed and operating time
• Optional display of min -1 or x g
• Speed can be increased in increments of 100
• Various sets available with different rotors.
e.g. a two-row rotor for holding 18 x 1.5/2.0 ml-
and 18 x 0.5 m centrifuge tubes
Cooling centrifuge models Fresco ® 17 and Fresco ® 21
• Cooled microlitre centrifuges
• With stop-period cooling
Technical specifications:
Model Pico ® 17 and Fresco ® 17 Pico ® 21 and Fresco ® 21
Maximum speed 13 300 min -1 14 800 min -1
Minimum speed 300 min -1
Maximum RCF 17 000 x g 21 100 x g
Operating time 1 to 99 min / Continuous Run / Quick Run
Temperature setting range Pico ® 17 / 21: Air-cooled or without cooling function
Fresco ® 17 / 21: -9 to +40 °C in 1 °C increments
Dimensions (H x W x D) Pico ® 17 / 21: 243 x 225 x 352 mm
Fresco ® 17 / 21: 295 x 330 x 445 mm
Heraeus ® Pico ® and Fresco ® packages with 1 rotor
Centrifuge incl. 24 x 1.5/2.0 ml rotor with aerosol-tight ClickSeal lid.
Type Art. No. Pack Qty. €
Heraeus ® Pico ® 17 with 24-place rotor HE09.1 1 1540,00
Heraeus ® Fresco ® 17 with 24-place rotor HE10.1 1 3720,00
Heraeus ® Pico ® 21 with 24-place rotor HE11.1 1 1950,00
Heraeus ® Fresco ® 21 with 24-place rotor HE12.1 1 4160,00
Heraeus ® Pico ® and Fresco ® packages with 2 rotors
Centrifuge incl. 24 x 1.5/2.0 ml rotor with aerosol-tight ClickSeal lid
and two-row 18 x 0.5 ml and 18 x 1.5/2.0 ml rotor with screw lid.
Type Art. No. Pack Qty. €
Heraeus ® Pico ® 21 with 24- and 36-place rotor HE13.1 1 2300,00
Heraeus ® Fresco ® 21 with 24- and 36-place rotor HE14.1 1 4580,00
14
NEW
at Roth
SPECIAL PRICE!
Compact PCR plate centrifuge C1000
For 2 PCR plates in 96-well format.
• Suitable for skirted, non-skirted or semi-skirted plates
(with/without half frame)
• To prevent soiling inside the rotor, only PCR plates
that have been hot-laminated or sealed with film should be used
• PCR plates are inserted vertically into the rotor
Technical specifications:
Max. speed 2500 rpm
Max. RZB 500 x g
Dimensions (W x D x H) 152 x 152 x 178 mm
Art. No. Pack Qty. €
PP33.1 1 485,90
NEW
at Roth
Small centrifuge EBA 270
With 6-slot oscillating rotor for centrifuging blood sample vessels,
urine test tubes and standard centrifuge tubes.
For use of the following types of vessel:
• 15 ml standard test tubes (∅ 17 x L 100 mm)
• 5/6 ml standard test tubes (∅ 12 x L 75/82 mm)
• 2.6-2.9 ml blood sample vessels (∅ 13 x L 65 mm),
2.7-3 ml (∅ 11 x L 66 mm)
• 4.9 ml blood sample vessels (∅ 13 x L 90 mm),
7.5-8.5 ml (∅ 15 x L 92 mm), 9-10 ml (∅ 16 x L 92 mm),
10 ml (∅ 15 x L 102 mm)
Technical specifications:
Max. speed 4000 rpm, adjustable in increments of 100 rpm
Max. RCF 2254 x g
Operating time 1 to 99 min 59 s / continuous or intermittent duty
Dimensions (W x D x H) 326 x 389 x 239 mm
Delivery incl. 6-slot oscillating rotor (90), 6 sleeves with hole ∅ 17.5 x
L 80 mm and 6 sleeves with hole ∅ 17.5 x L 50 mm.
Art. No. Pack Qty. €
PH35.1 1 962,15

Laboratory appliances
Small centrifuges EBA 20
• Display of actual status during run
• Comes as standard with 8-way steel angular rotor and sleeves
made of fibre-glass reinforced polyamide. Max. capacity 8 x 15 ml.
For application with following vessels:
• 8 x 15 ml standard tubes (∅ 17 x L 100 mm)
• 4 x 15 ml tubes with screw cap (∅ 17 x L 120 mm)
Technical specifications:
Max speed 6000 min-1 , adjustable in 100 min-1-steps Operating time 1 to 99 min, continuous run, impulse key
Dimensions (H x W x D) 216 x 231 x 292 mm
Art. No. Pack Qty. €
T463.1 1 901,95
Multipoint magnetic stirrer POLY 15
Powder-coated stainless steel housing. Digital display enables exact speed
setting. For max. 15 x 250 ml beakers or 6 x 1000 ml Erlenmeyer flasks.
Technical specifications:
Stirring points 15
Volume per stirring place 1 to 800 ml
Rpm 130 to 990 min-1 Dimensions (W x D x H) 240 x 420 x 35 mm
Art. No. Pack Qty. €
X544.1 1 755,00
Heating and magnetic stirrer
RCT basic safety control
• Temperature and speed control via digital display
• Digital display of preset safe temperature limit
• Adjustable safety circuit of hotplate temperature (50 to 360 °C)
• Hotplate made of aluminium
• Direct connection of medium temperature sensor PT 1000
possible. (Please order the accessories for attaching the sensor
separately).
• Integrated contact thermometer with full functionality
Technical specifications:
SPECIAL PRICE!
Magnetic stirrer drive
Max stirring volume (H 2 O) 20 l
Motor power: input / output 16 / 9 W
Speed display digital
Rpm range 50 to 1500 min -1
Heater function
Heating power 600 W
Temperature display digital
Temperature range Room temperature to 310 °C
Setting accuracy ±1 K
Control accuracy with temperature sensor in medium ±1 K
Platform size ∅ 135 mm
Other
Dimensions (W x D x H) 160 x 270 x 85 mm
Delivery incl. protective hood and PT 1000 temperature sensor.
Art. No. Pack Qty. €
EY83.1 1 499,00
Accessories for RCT basic safety control
Accessories for attaching temperature sensor PT 1000
Type Art. No. Pack Qty. €
Support rod A315.1 1 67,50
Crossing sleeve A316.1 1 29,00
Grip bar HA16.1 1 29,00
15

Liquid Handling
SPECIAL PRICES!
Platinum Reload System
Reload systems for pipettor tips
Pipettor tips in pre-assembled inserts. Easy to use: transfer the inserts with
tips into the empty rack, and the tips are ready for use. Top quality Mµlti-
Precision. Reusable racks with hinged lid, stackable. Certified free of
human DNA and PCR inhibitors, RNase/DNase free and pyrogen free.
Autoclavable.
Starter Kits Reload System
Delivery incl. Reload System and 10 racks (8 racks for PK21.1).
Type Art. No. Pack Qty. €
0.1-10 μl (tip No. 25) PK18.1 10 x 96 41,95
1-200 μl (tip No. 30) PK19.1 10 x 96 39,80
1-300 μl (tip No. 33) PK20.1 10 x 96 52,70
50-1250 μl (tip No. 36) PK21.1 8 x 96 44,10
Refill sets Reload System
Type Art. No. Pack Qty. €
0.1-10 μl (tip No. 25) PK22.1 4 x 960 79,55
1-200 μl (tip No. 30) PK23.1 4 x 960 70,95
1-300 μl (tip No. 33) PK24.1 4 x 960 93,55
50-1250 μl (tip No. 36) PK25.1 4 x 768 101,05
12 Standard UNIVERSAL 100-1000 µl
Blue. Suitable for Biohit, BRAND, Eppendorf, Gilson, Roth, Socorex.
Autoclavable.
Capacity (μl) Package sizes Art. No. Pack Qty. €
100-1000 bulk-packed (bag), unsterile 2679.1 1000 12,85
100-1000 in MultiTray-insert unsterile KE24.1 16 x 60 42,95
15 Standard Pipettor tips 50-1200 µl
Colourless. Suitable for Biohit eLINE ® LP85.1 and LP89.1. Autoclavable.
Capacity (μl) Package sizes Art. No. Pack Qty. €
50-1200 bulk-packed (bag), unsterile LT33.1 1000 45,70
50-1200 Racks, unsterile LT34.1 10 x 96 78,30
17 Standard MAKRO 1-5 ml
Colourless. Length 134 mm.
Suitable for Biohit, Socorex, Labmate and Roth. Autoclavable.
Capacity (ml) Package sizes Art. No. Pack Qty. €
1-5 bulk-packed (bag), unsterile CX70.1 300 28,95
16
NEW
at Roth
Multichannel pipettors eLINE ® electronic
Electronic microlitre pipettors, by Biohit.
• Twice as fast as mechanical pipettors
• Covers the volume range of two mechanical pipettors
• Reduced effort when pipetting
• Electronically-controlled tip ejection, tip ejection button for both right and
left-hand users
• Improved pipetting reproducibility, for user-independent result
• Ergonomic design
• Optiload tip loading mechanism
• Rotatable dispensing head
• Typical applications: PCR, ELISA
• Pipetting still possible while loading
• Articles LP85.1 and LP89.1 with autoclavable dispening head
Functions:
• Pipetting, reverse pipetting
• Pipetting with mixing / cycle counter
• Dispensing: Multiple dispensing, sequential dispensing
• Diluting, diluting with mixing, multi-aspiratung
• 6 memory settings
• 9 speeds for suction and dispensing
• Single point calibration
Technical specifications:
Volume Test volume Inaccuracy Non-precision Safe-Cone Safe-Cone Filter
(μl)
Delivery incl. charging station.
8-channel
Capacity (μl) Increment (μl) Tip type (μl) Art. No. Pack Qty. €
0,2-10 0,05 10 LP82.1 1 809,60
5-120 0,50 300, 350 LP83.1 1 715,50
10-300 1,00 350 LP84.1 1 715,50
50-1200 5,00 1200 LP85.1 1 809,60
12-channel
Capacity (μl) Increment (μl) Tip type (μl) Art. No. Pack Qty. €
0,2-10 0,05 10 LP86.1 1 956,70
5-120 0,50 300, 350 LP87.1 1 884,55
10-300 1,00 350 LP88.1 1 884,55
50-1200 5,00 1200 LP89.1 1 956,70
Accessories:
(μl)
0.2-10 10
5
1
5-120 120
60
12
10-300 300
150
30
50-1200 1200
600
120
(%)
0.90
1.50
4.00
0.50
0.70
2.00
0.50
0.70
2.00
0.50
1.00
2.50
(%)
0.50
0.80
3.00
0.20
0.30
1.50
0.20
0.30
1.00
0.20
0.30
1.00
SPECIAL PRICES!
Filter Standard Plus
- -
X230.1 AL18.1
X229.1 AL19.1
K776.1 AL20.1
Charging station for 1 pipette, incl. power unit LP90.1 1 173,70
Charging station for 4 pipettes, incl. power unit LP91.1 1 348,30

TOP-OFFER
Rotilabo ® -microlitre pipettors
Proline ® , variable
Easy - robust - reliable
• Ergonomic handle enables one-hand operation
•Comfortable finger rest
• Low-weight for fatigue-free operation
• Easy-to-read display
• With calibrating tools for easy self-calibration
*Two pipettors in one. For 10 µl and 200 µl tips. Supplied with 10 µl cone. If 200 µl tips are to
be used, simply change the tip ejector sleeve, which is supplied with order.
Capacity Increment Tip type Art. No. Pack Qty. €
(μl) (μl) (μl)
0,1-2,5 0,05 10 P865.1 1 134,40
0,5-10 * 0,1 10, 200 L312.1 1 127,95
5-50 0,5 200 E223.1 1 102,15
10-100 1 200 N468.1 1 106,45
20-200 1 200 E224.1 1 102,15
100-1000 5 1000 P852.1 1 106,45
1000-5000 50 5000 E226.1 1 102,15
SPECIAL PRICES!
✔ Ergonomic handle
✔ With separate tip ejection
✔ With Certificate of Conformity in acc. with DIN EN ISO 8655, with Test Protocol
Pipettor carousel
Made of acryl. Ideal for 5 Roth pipettors.
Art. No. Pack Qty. €
K110.1 1 80,65
17

Sampling
SPECIAL PRICES!
Rotilabo ® -sector collector
For powders, granulates and grain. Available either in aluminium or highgrade
steel. With steel plungers on all models. Ideal for sampling in quality
assurance, goods reception, batch monitoring, etc. Sections can be closed
and enable exact monitoring of a pre-determined depth. ∅ 20 mm.
Application: Handle of plunger is turned in such a way that all sections are
closed. The bag is pierced with the tip of the sampler. When deep enough,
the individual sections are then opened by turning the handle to pick up the
sampling material. Sections are then closed again. Finally, the collector is
removed from the sample material for emptying.
Material Total length No. of sectors Capacity Art. No. Pack €
(mm)
(cm³)
Qty.
Aluminium 480 3 20 L113.1 1 85,80
High-grade steel 480 3 20 L114.1 1 316,95
Aluminium 860 3 25 L115.1 1 112,70
High-grade steel 860 3 25 L116.1 1 268,55
Aluminium 1560 5 33 L117.1 1 139,55
Gas-tight barrel and container pump
Made of PP, with tubing made of PVC. Pump capacity 200 ml/stroke.
Gases emerging from the container are led back to the main container with
the aid of a gas dispensing tube, preventing contamination of surroundings
while pumping. Universal adapter for openings from 30 to 70 mm.
Ideal for container heights from 40 to 70 cm. Tubing length approx. 120 cm.
Recommended by the German Chemical Trade Associaton.
Art. No. Pack Qty. €
E013.1 1 164,50
18
Control seals
Ideal for airtight sealing of pierced bags, carton boxes, etc.
Made of aluminium foil with extra strong adhesive layer.
Roll with 1000 pieces, ∅ 95 mm.
Inscription Art. No. Pack Qty. (roll) €
QUALITÄTSKONTROLLE T457.1 1 93,00
QUALITY CONTROL T513.1 1 93,00
CONTRÔLE QUALITE - PRELEVE LE T514.1 1 93,00
Plastic suction pump
For water and other harmless liquids. Transporting tube, made of PP,
L64cm, ∅ 13 m. Tube made of vinyl, L 100 cm.
Suction capacity approx. 15 ml per pumping cycle.
Art. No. Pack Qty. €
0732.1 1 16,05
SPECIAL PRICES!
S
PP-sampling scoops with handle
Made of break-proof, transparent PP. Screw cap made of PE.
Sterile (packed individually). Blue, suitable for the food industry. For sterile
sampling and subsequent analysis, reduces cross-contamination.
Overall length of handle 240 mm. Handle can be removed after sampling.
Capacity Height of Container-∅ Overall height Art. No. Pack €
(ml) container (mm) (mm) (mm)
Qty.
40 70 30 275 HL41.1 250 145,05
125 74 52 275 HL42.1 100 78,45
180 102 52 305 HL43.1 100 75,15

TOP-OFFER
RBS ®
Cleaning systems for lab dishwashers
Pre-cleaning
RBS ® NA 1
Liquid, acidic pre-rinse and neutralisation agent for automatic
dishwashers
• Phosphates-free
• Free from tensides
Prewash: removes stubborn dirt such as carbonates, hydroxides and
limescale deposits. Enhances the performance of alkaline main wash cycle
detergents.
Rinse: neutralizes alkaline detergent residues and prevent limescale
deposits on the parts cleaned and in the dishwashers.
Ingredients: citric acid and mineral salts.
Use concentration: 0.1 to 0.5 % v/v. Particularly effective in combination
with RBS SOLID pF, RBS B 023 or RBS pF.
�i R: 36/37/38 S: 24-26-35-37
Art. No. Pack Qty. €
AL97.1 5 l 34,35
Head-cleaning
RBS ® SOLID pF
Powder-based, alkaline high-performance detergent
for laboratory dishwashers
• Phosphates-free
Suitable for laboratory glassware, quartz, stainless steel and alkalineresistant
synthetics. Removes grease, proteins, mineral salts, distillation
residues and other organic and anorganic substances. Free of phosphates
and therefore suitable for use in analytical labs. Rinses off trace-free.
Ingredients: sodium hydroxide, anionic and nonionic tensides, sodium
nitrilotriacetate.
Application concentration: 0.1 % v/v, higher concentrations can be used
to remove stubborn dirt. Temperature between 50 and 90 °C accelerate the
cleaning process. Particularly effective in combination with RBS NA 1 and/
or RBS R 60 pF.
�n R: 40-36/38 S: 26-35-36/37-46
Art. No. Pack Qty. €
AL95.1 5 kg 38,70
RBS ® B 023
High-alkaline liquid detergent for automatic dishwashers
and CIP systems
• For heavily soiled parts in laboratories and industry
• Free of phosphates and chlorine
Removes grease, oil, blood, protein, cell culture and distillation residues.
Particularly well suited to the removal of limescale residue, metal oxides,
salts and inorganic residues from glass, ceramic, porcelain, synthetic and
stainless steel surfaces. Disinfectant in accordance with EN 1040, EN 1275
and EN 1276. Ingredients: mineral salts, chelating agent, potassium
hydroxide.
Use concentration: 0.3 to 2 % v/v. Temperatures up to 90 °C accelerate
the cleaning process. Particularly effective in combination with RBS NA 1
and/or RBS R 60 pF.
� R: 35 S: 24-26-28-35-36/37/39-45-59
Art. No. Pack Qty. €
AL92.1 5 l 36,15
SPECIAL PRICES!
Rinsing agent
✔ High effective
✔ Residue-free
✔ Ecofriendly
RBS ® R 60 pF
Liquid, slightly acidic rinsing agent for automatic dishwashers
• Phosphates-free
Neutralizes alkaline detergent residues and prevents limescale deposits on
item cleaned and in the dishwasher. Accelerates the drying process and
produces a glossy finish. Free of phosphates and therefore suitable for use
in analytical labs. Ingredients: nonionic tensides, citric acid and alcohol.
Use concentration: 0.1 to 0.3 % v/v.
�i R: 36/38 S: 24-26-37
Art. No. Pack Qty. €
AL96.1 5 l 47,30
Dosing pumps for RBS canisters
Made of HDPE.
Suitable for
RBS canister size
Dosing volume/stroke (ml) Art. No. Pack Qty. €
5 l 25 HL77.1 1 7,35
19

Sampling and storage
SPECIAL PRICES!
Spray bottle Turn'n'Spray
Made of LDPE, parts in contact with media are made of PP, PE, silicon and
stainless steel. Allows uninterrupted spraying from all positions, including
overhead. Neck inner ∅ 19 mm. Nozzle is continuously adjustable, nozzle
∅ 0.6 mm. Spray quantity per stroke: 1.2 ml ±0.1.
Capacity (ml) Height including cap (mm) Art. No. Pack Qty. €
250 220 PX90.1 1 6,05
500 240 PX91.1 1 6,60
1000 295 PX92.1 1 6,80
SPECIAL PRICES!
Rotilabo ® -wide neck cans
Made of hard PVC clear or amber, or clear PETG. Square. Screw-on cap
made of PP with PE-foam insert. Excellent for packing and storing liquids
and solids. Wide neck enables easy filling. Approved for foodstuffs.
PETG
Capacity Length of a Neck inside Height without Art. No. Pack €
(ml) side (mm) dia. (mm) cap (mm)
Qty.
50 38 23 60,5 H328.1 25 15,00
100 46 31 71 H329.1 24 17,15
200 59,5 41 88,5 H330.1 14 19,30
500 80,5 54 108 H331.1 10 16,65
1000 97,5 69 144 H332.1 8 18,80
2000 122 69 187 T408.1 4 15,55
20
NEW
at Roth
NEW
at Roth
Sample beakers
Beaker made of PP. Highly transparent, graduated, shatterproof.
Sterile (assembled, individually packed) or non-sterile (lid enclosed).
Physiologically safe, biologically inert, heavy metal free.
With labelling area and liquid-impermeable lid. CE certified to 98/79/EC.
With snap-on lid
Made of LDPE. ∅ 67 x H 69 mm, 25 ml graduations.
Capacity (ml) Lid colour Design Art. No. Pack Qty. €
125 blue non-sterile PT07.1 500 53,25
125 red, with spout non-sterile PT08.1 500 38,70
125 yellow sterile PT09.1 150 66,65
With screw cap
Made of HDPE. ∅ 64 x H 70 mm, 20 ml graduations.
Capacity (ml) Lid colour Design Art. No. Pack Qty. €
100 green non-sterile PT10.1 500 64,00
100 green non-sterile PT11.1 100 15,60
100 yellow sterile PT12.1 150 46,90
Medical beakers
Made of PP. Highly transparent, shatterproof, graduated, 1 ml graduations
(from 3 ml upwards). Dimensions: ∅ bottom 27 mm, height 42 mm.
Physiologically safe, biologically inert, heavy metal free.
CE certified to 98/79/EC.
Supplied without snap-on lid (please order separately).
Capacity (ml) Colour Art. No. Pack Qty. €
30 natural PT13.1 75 2,70
30 blue PT14.1 75 2,90
30 red PT15.1 75 2,90
30 yellow PT16.1 75 2,90
30 green PT17.1 75 2,90
Snap-on lid for medical beakers
Made of LDPE, white, ∅ 39 mm.
Art. No. Pack Qty. €
PT18.1 75 3,20
S
NEW
at Roth

Sampling vessels for pathology
NEW
at Roth
Stool tubes
With wide mouth spoon for bean-sized samples. Physiologically safe,
biologically inert, heavy metal free. CE certified to 98/79/EC.
Supplied assembled.
With stopper plug
Made of PS, cap with sample spoon made of HDPE.
Transparent tube, without graduations.
Capacity (ml) ∅ x H (mm) Design Art. No. Pack Qty. €
16 22 x 75 Flat base, non-sterile PT22.1 1000 99,45
With screw cap
Made of PP, cap made of HDPE, spoon made of HIPS. Radiation sterile
or non-sterile. Transparent tube, without graduations. Overlapping screw
cap ensures optimal hygiene when opening, impervious to fluids. Primary
packaging for the shipment of stool samples compliant with DIN EN 829.
Capacity (ml) ∅ x H (mm) Design Art. No. Pack Qty. €
15 20 x 76 Rim, non-sterile PT23.1 1000 138,90
13 16 x 100 Round base, non-sterile PT24.1 1000 119,35
30 25 x 107 Rim, non-sterile PT25.1 500 89,50
15 20 x 76 Rim, sterile PT26.1 100 18,50
13 16 x 100 Round base, sterile PT27.1 100 16,10
30 25 x 107 Rim, sterile PT28.1 100 23,65
NEW
at Roth
Sputum containers
Made of PS, cap made of HDPE. Transparent vessel, without graduations.
Flat base. Physiologically safe, biologically inert, heavy metal free.
CE certified to 98/79/EC.
Sputum tube with stopper plug
Supplied assembled.
Capacity (ml) ∅ x H (mm) Design Art. No. Pack Qty. €
16 22 x 62 non-sterile PT19.1 1000 85,80
Sputum tub with screw cap
Supplied sterile (assembled) or non-sterile (cap enclosed).
Capacity (ml) ∅ x H (mm) Design Art. No. Pack Qty. €
24 70 x 23 non-sterile PT20.1 200 44,95
24 70 x 23 sterile PT21.1 200 60,45
Shipping container for sputum container
Made of HDPE.
Art. No. Pack Qty. €
PT39.1 100 48,95
S
S
Protective and shipping containers
Made of PP, with absorbent pad and print. Secondary packaging for stool
tube to DIN EN 829, optimal protection against external forces. Aeskulap
symbol and CE mark of conformity visibly printed. Sample vessels and
absorbent pads are easily removable, absorbent pad encloses the sample
container and provides additional protection. Autoclavable.
Protective containers ∅ 30 mm fit into standard letter boxes with 35 mm
slot, protective container PT31.1 is also suitable for shipping standard agar
carriers (e.g. Uricult ® ). Protective container PT30.1 with cap PT37.1 is
suitable for Port-a-CulTM tubes.
Supplied without screw caps (please order separately).
Capacity ∅ x H For stool With caps Art. No. Pack
€
(ml) (mm) tubes
Qty.
40 30 x 85 PT22.1
PT23.1
PT19.1
PT35.1 or PT36.1
PT35.1
for container ∅
30 mm
NEW
at Roth
PT29.1 500 117,20
60 30 x 126 PT24.1 for container ∅
30 mm
PT30.1 300 88,15
120 44 x 115 PT25.1 PT38.1 PT31.1 250 96,55
Screw cap for protective and shipping containers
Made of PP.
For container ∅ Type Art. No. Pack
€
(mm)
Qty.
30 Standard PT35.1 500 26,90
30 With base for tube ∅ 16 mm PT36.1 300 20,10
30 With inner attachment ∅ 16 mm PT37.1 300 21,45
44 With base for tube ∅ 25 mm PT38.1 250 18,10
21

Laboratory equipment
Sekuroka ® -transport box
Made of PP. With recessed grip on the side. Very robust, stackable.
UN-authorized for storing and transporting solids, granulates and powders
(Packing group l, ll and lll) if used together with UN-seal tape to secure lid.
Delivery without seal tapes, please order separately.
Capacity (l) L x W x H (mm) Art. No. Pack Qty. €
20 400 x 300 x 275 T325.1 1 36,15
45
Accessories:
600 x 400 x 275 LL32.1 1 39,55
UN-seal tapes LL31.1 50 11,20
Stool on rollers
Acc. to DIN 4569. TÜV and BG tested. Runs on 3 spring-bearing wheels
(attachable). With thick plastic stand ring. Immovable, stationary stand from
5 kg load. Steps covered with nonslip rubber covering. Max. load 150 kg.
Metal stools
Made of powder-coated metal, lead and cadmium free.
Dimensions: H 430 mm, upper ∅ 290 mm, lower ∅ 435 mm.
Weight 4.9 kg.
Colour Art. No. Pack Qty. €
blue X429.1 1 43,00
light grey
Plastic stools
Made of breakproof PP.
X430.1 1 43,00
Dimensions: H 425 mm, upper ∅: 290 mm, lower ∅ 445 mm.
Weight 2.8 kg.
Colour Art. No. Pack Qty. €
white X431.1 1 37,65
light grey X432.1 1 37,65
22
SPECIAL PRICES!
NEW
at Roth
❄❄❄
Dewar containers
By Nalgene ® . Made of HDPE. Chemical-resistant with double walls filled
with polyurethane foam. Vented, insulated lid. With moulded-in ribs, lid
securing tabs, pour spout, and bottom grip area. Canister with carrying strap
(except for 10 l). Suitable for safe short-term handling and storage of liquid
nitrogen, dry ice, freezing mixtures and iced water. Shatter-proof.
With stands temperatures from -196 to +100 °C.
Capacity (l) Inner ∅ (mm) Inner height (mm) Art. No. Pack Qty. €
1 96 195 PP15.1 1 107,50
2 122 231 PP16.1 1 118,25
4 158 295 PP17.1 1 129,00
10 198 396 PP18.1 1 225,75
Lab services trolleys
Made of high-grade 18/10 steel. Load per shelf 40 kg. Comes on extra large
wheels with wall fender guards and two wheel locks. Diameter of wheels is
125 mm. Without protruding edges and screws, therefore safe and easy to
clean. Wheels are anti-static. Shelf size L 800 x W 500 mm.
Model With 2 and 3 shelves With 4 shelves
Outer dimensions L x W x H (mm) 900 x 600 x 940 900 x 600 x 1260
No. of Distance between Weight Total load Art. No. Pack
€
shelves shelves (mm) (kg) capacity (kg)
Qty.
2 590 approx. 15 80 0033.1 1 274,15
3 280 approx. 22 120 A206.1 1 301,00
4 280 approx. 27 130 Y497.1 1 370,90

Storage and Aids
Rotilabo ® -narrow neck bottles
Made of HDPE. Rectangular. Ideal for storing, packing and sampling
chemicals. With tamper evident screw cap. Thread GL 32.
Capacity (ml) Lid colour Art. No. Pack Qty. €
100 blue 5698.1 10 14,05
250 red 5706.1 10 16,25
500 blue 5713.1 10 17,20
1000 blue 5717.1 10 19,25
Safety canisters
Made of stainless steel 1.4571, polished. 20-liter canister (Art. No. PC09.1),
made of stainless steel 1.4301. Wall thickness 0.8 mm. Seals made of
PTFE. For safe storage and decanting of flammable liquids. With removable
flame arrestor in the filler. In models with a screw cap, the screw cap is
secured against loss by a flexible shaft.
With screw cap and UN-X-approved
In compliance with GGVSEB, GGVSee, ADR, RID and IMDG Code
requirements for transporting hazardous liquids. 20-liter canister
(Art. No. PC09.1) also with venting screw for manual pressure relief.
Capacity (l) H x W x D (mm) Weight (g) Art. No. Pack Qty. €
5 310 x 130 x 200 1650 PC07.1 1 221,45
10 380 x 130 x 280 2500 PC08.1 1 263,40
20 470 x 175 x 345 3700 PC09.1 1 320,35
With self-closing stopcock
Suitable for horizontal storage, fits into most laboratory safety cabinets.
With venting screw for manual pressure relief.
Capacity (l) H x W x D (mm) Weight (g) Art. No. Pack Qty. €
5 310 x 130 x 200 1650 PC10.1 1 301,00
10 380 x 130 x 280 2500 PC11.1 1 331,10
20 470 x 175 x 345 3700 PC12.1 1 368,75
Funnel for safety canisters
Made of stainless steel 1.4571, angled, wall thickness 0.6 mm.
Funnel-∅ 120 mm, stem-∅ 34 mm.
Height (mm) Weight (g) Art. No. Pack Qty. €
120 350 PC13.1 1 64,50
SPECIAL PRICES!
Compressed-air dust spray
For easy removal of dust and slight dirt from sensitive partsor in places that
are difficult to reach. Comes with attachable capillary tube for precise
application. Dry, strong air jet. Application: medical-technics, metrology,
microscopy, precision mechanics, photography and optics, etc.
Propellant: tetrafluoroethane.
S: 2
Art. No. Pack Qty. €
P528.1 200 ml can 7,00
Label remover SOLVENT 50 SUPER
With NSF certificate, specially for the food supplies, animal feed and
packaging industries, hospitals and retail trade.
Label remover with attachable dosing brush. Propellant: CO2 .
NSF K3-certified for use in foodstuff-related industries.
�+ �i f R: 12-38-51/53-67 S: 2-16-23-35-51
Art. No. Pack Qty. €
KL91.1 200 ml can 7,50
Rotilabo ® -aluminium bottles
Ideal for storing and transporting substances and reserve samples. Welded
in one piece from pure aluminium Al 99.5 %. Bottle can be totally emptied.
Bottles are odorless, opaque, break- and rustproof. Screw cap is made of
PP with aluminium inner sealing with tamper evident closure.
Comply with PCB-regulations. No individual examination.
Capacity (ml) ∅ (mm) Height (mm) Art. No. Pack Qty. €
60 40 88 P791.1 10 14,70
120 57 97 P792.1 10 17,65
300 57 160 P793.1 10 23,35
600 74 192 P794.1 5 17,00
1200 88 248 P795.1 5 20,25
23

Measuring technology pH
pH-buffer solutions
In 20 ml bags. The reagent contents of a bag are sufficient for one
calibration. Bag is light- and airtight. Accuracy ±0.01 pH.
Without Certificate
pH-value Art. No. Pack Qty. €
4,01 N320.1 25 22,00
7,01 N321.1 25 22,00
10,01
With Certificate
N322.1 25 22,00
pH-value Art. No. Pack Qty. €
4,01 Y477.1 25 25,50
7,01 Y478.1 25 25,50
10,01 Y479.1 25 25,50
SPECIAL PRICES!
Storage sets for electrodes
For safe, standby storage of electrodes with shaft ∅ 12 mm.
Set - standard equipment:
Screw cap GL 45 incl. 5 seals (upper side made of PTFE, lower side made
of silicone-elastomer). Bore hole for storing electrodes.
Set 1: Delivery without screw thread bottle and storage solution (please
order separately).
Set 2: Delivery incl. 100 ml screw thread bottle and 460 ml storage solution
HI 70300.
Type Art. No. Pack Qty. €
Set 1 KH88.1 1 19,30
Set 2
Accessories for storage sets
Screw thread vials
LK39.1 1 29,60
Made of DURAN ® , transparent. Autoclavable.
With GL 45 thread and subdivisions. Without pouring ring and cap.
Type Art. No. Pack Qty. €
Screw thread bottles, 100 ml, H 100 mm T426.1 10 26,75
Screw thread bottles, 250 ml, H 138 mm
Storage solution HI 70300
T427.1 10 31,90
For pH-electrodes. Guarantees rapid reaction time and exact measuring
results of electrodes.
Type Art. No. Pack Qty. €
Storage solution HI 70300
Screw cap GL 45
9608.1 460 ml 8,95
With bore hole ∅ 34 mm. Without silicone gaskets.
Type Art. No. Pack Qty. €
Screw cap GL 45 L994.1 1 2,85
24
Pocket-pH-/°C-meters FiveGo ®
Properties:
• Simultaneous display of pH- or mV-value and temperature as well as
status of electrode
• Automatic 1-/2 point calibration with 3 predefined buffer groups
• Graphic symbols help and guide user with calibration and application
• Automatic or manual temperature compensation
• Automatic or manual measurement stop
• Memory for 30 readings
• Calibration data display
Technical specifications:
Measuring range / Resolution pH
mV
°C
Accuracy pH
mV
°C
SPECIAL PRICES!
0.00 to 14.00
-1999 to +1999
0.0 to 100.0
±0,01
±1
±0,5
Dimensions (L x W x H) 169 x 82 x 36 mm
Pocket-pH-/°C meter FiveGo ® Starter-Kit FG2-Kit
Delivery incl. pH-electrode model LE438 with integrated temperature
probe, electrode clip, wrist strap, buffer solutions pH 4.01/7.00
(2 x 30 ml bags of each) and 4 batteries Micro 1.5 V.
Art. No. Pack Qty. €
HY67.1 1 249,00
Pocket-pH-/°C meter FiveGo ® Professional-Kit FG2 field kit
Delivery incl. pH-electrode model LE438 with integrated temperature
probe, electrode clip, wrist strap, buffer solutions pH 4.01/7.00 (2 x 30 ml
bags of each), pouch with 4 sample vials and 4 batteries Micro 1.5 V.
Art. No. Pack Qty. €
HY68.1 1 279,00
SPECIAL PRICE!
Electrode holder
Suitable for 3 electrodes. Fully flexible for almost any position.
Stable base plate (L 300 x W 150 mm), made of coated steel.
∅ of 3 openings = 12 mm each. Weight 1500 g.
Art. No. Pack Qty. €
9287.1 1 69,95

TOP-OFFER
Desktop pH-/mV-/°C meter
HI 2211-02
Equipment:
• Simultaneous display of pH or mV value and temperature
• Automatic 1/2-point calibration with 5 pre-programmed
standard buffers (pH 4.01; 6.86; 7.01; 9.18; 10.01)
• Automatic or manual temperature compensation
pH measuring technology
for professionals
SPECIAL PRICE!
Technical specifications:
Measurement range / Resolution pH
mV
-2.00 to 16.00
±399.9 (ISE)
±2000 (ORP)
°C -9.9 to +120.0
Accuracy pH ±0.01
mV ±0.2 (ISE)
±1 (ORP)
°C ±0.5
Dimensions (L x W x H) 240 x 182 x 74 mm
Delivery incl. pH glass electrode HI 1131 B, temperature
sensor, electrode arm, buffer solution pH 7.01 and pH 4.01
(20 ml each), electrolytic solution and 12 V adaptor.
Art. No. Pack Qty. €
PA65.1 1 295,00
25

Measuring instruments
SPECIAL PRICE!
Short-term timer
Count down/count up function. With clock. For max. periods of 23 hrs
59 mins and 59 secs. Ideal for standing upright, attaching with magnet or
clipping to breast pocket.
Delivery incl. battery Micro 1.5 V.
Art. No. Pack Qty. €
K512.1 1 15,00
SPECIAL PRICES!
Count-down/count-up timer
Programmable for 99 min, 59 s. With magnet for affixing.
Rubberised coating. Dimensions: ∅ 55 x D 15 mm.
Delivery incl. 1.5 V button cell battery.
Colour Art. No. Pack Qty. €
red LY66.1 1 4,85
white LY65.1 1 4,85
SPECIAL PRICES!
Multi-purpose clocks with timer
• Display lighting
• Clock with date and alarm mode
• Temperature (measuring range/resolution: -20.0 to +50.0 °C)
• Count-down timer (max. runtime: 9 h 59 min 59 s) with signal
• Stop watch (max. runtime: 9 h 59 min 59 s) with interval timer
Dimensions: W 30 x L 55 x D 13 mm. Weight 30 g.
With snap-hook or ring fastener for attaching to labcoat.
Delivery incl. round cell battery.
Colour Art. No. Pack Qty. €
black HH45.1 1 10,70
red HH46.1 1 10,70
26
Thermometers P300
With display light. Min/Max- and hold function. Integral probe holder.
Technical specifications:
Measuring range /Resolution -40.0 to +200.0 °C
Accuracy ±0.5 °C (0 to 100 °C)
±1.0 °C (rest outside)
Dimensions (H x L x W) 130 x 65 x 25 mm
Delivery incl. 2 Mignon 1.5 V batteries.
Measuring instrument P300
With fixed penetration probe. Dimensions of probe: L 120 mm x ∅ 3.5 mm.
Art. No. Pack Qty. €
N359.1 1 59,15
Measuring instruments kit P300 with certificate
Delivery incl. P300 meter with fixed penetration probe.
Probe size: L 120 mm x ∅ 3.5 mm.
ISO-Calibration Certificate with two calibration points (0 °C; 60 °C)
Art. No. Pack Qty. €
HT78.1 1 83,85
NEW
at Roth
Temperature limiter for thermometer
Reference object for constant temperature measurement in
refrigerators. Avoids large temperature fluctuations, e.g. due to frequent
opening of the refrigerator door. The sensor is inserted into one of the
accurate-fitting holes and fixed in place with a screw. The reference object
acts as a buffer and provides a homogeneous temperature distribution,
because mass (and not air) is measured. Suitable for sensors with ∅ of
3.5 mm, 4.2 mm and 5.0 mm. Dimensions: W 60 x D 25 x H 25 mm.
Art. No. Pack Qty. €
PT43.1 1 20,35

TOP-OFFER
SPECIAL PRICES!
Apiezon ® -lubricants
✔ High lubricating
and gettering properties
✔ Extremely low steam pressures.
Model Features Melting Steam pressure Temperature Art. No. Pack €
point (at +20 °C) range
Qty.
AP 100 High vaccum; good lubrication, resists alkali, acid and corrosive gas.
Particulary good for polished ground glass joints. Free of silicone.
+47 °C 7 x 10-11 torr +10 to +30 °C C986.1 50 g 96,75
AP 101 Heavy duty grease for wide temperature range. Medium vacuum. Free of silicone. > +200 °C +250 °C 1,7 x 10-9 torr -10 to +240 °C 1686.1 25 g 88,15
Apiezon ® -waxes
and -sealing agents
Apiezon ® -waxes W, W 40, W 100
Provide lasting, high-vacuum sealing, excellent getter properties and low vapour pressure.
Resistant to acids such as hydrofluoric acid, nitric acid and acetic acid.
Can be removed with hydrocarbons and chlorinated hydrocarbons.
Apiezon ® -sealing kit Q
Ideal for sealing joints and for filling cracks. Especially suitable for vacuum technology
when extremely low vapour pressure is not required. Waterproof.
Model Features Melting point Steam pressure Temperature Art. No. Pack Package
€
(at +20 °C) range
Qty. sizes
W Sealing agent for seams which can heat up during operation. 80 to 90 °C 4.5 x 10-9 torr -10 to +75 °C AL06.1 1000 g Block 75,25
W Sealing agent for seams which can heat up during operation. 80 to 90 °C 4.5 x 10-9 torr -10 to +75 °C AL06.2 20 g Stick 4,80
W 40 Sealing agent can be poured into or around a seam. 40 to 50 °C 6 x 10-8 torr -10 to +35 °C AL07.1 250 g Can 89,25
W 100 The soft wax reduces the risk of cracking in response to vibration loads. 50 to 60 °C 4.5 x 10-9 torr -10 to +45 °C AL08.1 250 g Can 89,25
Sealing kit Q Versatile sealing compound for vacuum technology. 40 to 50 °C 1 x 10-4 torr -10 to +30 °C AL09.1 1000 g Can 89,25
27

Filtration
Rotilabo ® -syringe filters
Sterile, ∅ 15 mm, housing made of PP, ultrasonic welded, colourless
Pore size (μm) Membrane material Art. No. Pack Qty. €
0,2 RC PA49.1 100 100,00
0,45 RC PA50.1 100 100,00
0,2 PA PA51.1 100 73,10
0,45 PA PA52.1 100 73,10
0,2 PTFE PA53.1 100 73,10
0,45 PTFE PA54.1 100 73,10
0,2 PVDF PA55.1 100 73,10
0,45 PVDF PA56.1 100 73,10
0,2 PP PA57.1 100 81,70
0,45 PP PA58.1 100 106,45
0,2 PES PA59.1 100 68,80
0,45 PES PA60.1 100 68,80
0,45 PET PA62.1 100 93,55
0,2 CME PA63.1 100 73,10
0,45 CME PA64.1 100 73,10
Unsterile, ∅ 25 mm, housing made of PP, with coloured rim
Pore size (μm) Membrane material Colour coding Art. No. Pack Qty. €
0.2 CA light grey KC60.1 100 108,60
0.45 CA grey KC61.1 100 101,05
0.2 RC orange KC62.1 100 130,10
0.45 RC red KC63.1 100 130,10
0.2 Nylon yellow KC64.1 100 115,05
0.45 Nylon light orange KC65.1 100 115,05
0.2 PTFE magenta KC66.1 100 115,05
0.45 PTFE purple KC67.1 100 115,05
0.2 PVDF violet KC68.1 100 126,85
0.45 PVDF blue KC69.1 100 126,85
0.2 PES blue NA21.1 100 100,00
Sterile, ∅ 25 mm, housing made of PP with coloured rim
Pore size (μm) Membrane material Colour coding Art. No. Pack Qty. €
0.2 CA light grey KC70.1 100 119,35
0.45 CA grey KC71.1 100 116,10
0.2 RC orange KC72.1 100 151,60
0.45 RC red KC73.1 100 151,60
0.45 Nylon light orange KC75.1 100 137,10
0.2 PTFE magenta KC76.1 100 137,10
0.45 PTFE purple KC77.1 100 137,10
0.2 PVDF violet KC78.1 100 148,35
0.45 PVDF blue KC79.1 100 148,35
0.2 Nylon yellow KC74.1 100 137,10
Unsterile, ∅ 30 mm, housing made of PC with coloured rim
Pore size (μm) Membrane material Colour coding Art. No. Pack Qty. €
0.2 CA light grey KC80.1 100 160,20
0.45 CA grey KC81.1 100 147,30
0.2 RC orange KC82.1 100 207,50
0.45 RC red KC83.1 100 207,50
0.2 Nylon yellow KC84.1 100 165,55
0.45 Nylon light orange KC85.1 100 165,55
0.2 PTFE magenta KC86.1 100 165,55
0.45 PTFE purple KC87.1 100 165,55
0.2 PVDF violet KC88.1 100 192,45
0.45 PVDF blue KC89.1 100 192,45
28
S
SPECIAL PRICES!
Stericup ® -vacuum filter systems
Combination of bottle top filter and collecting bottle.
• For routine sterile filtration of tissue culture media, serum, additives and
other aqueous solutions
• Low protein binding
• High flow rates - short filtration times
• Vacuum filter systems for volumes of 150 to 1000 ml
• The compact form makes it ideal for use under laminar flow
• 0.1 µm pore size for mycoplasma-precipitation
• Pore sizes 0.22 and 0.45 µm
• Bottles are stackable
Technical specifications:
*Millipore Express Membrane (PES)
MILLIPORE Express ® PLUS (PES)-membrane
Pore size Funnel capacity Dripbottle Art. No. Pack Qty. €
(μm) (ml)
(ml)
0.1* 250 250 CX01.1 12 87,05
0.22 150 150 X338.1 12 65,55
0.22 250 250 X339.1 12 81,15
0.22 500 500 X340.1 12 124,70
0.22 500 1000 X341.1 12 173,10
0.22 1000 1000 X342.1 12 182,75
Durapore ® Membrane Express
(PVDF)-membrane with extremely low protein binding
Pore size Funnel capacity Dripbottle Art. No. Pack Qty. €
(μm) (ml)
(ml)
0.22 150 150 CT87.1 12 75,75
0.22 250 250 CT88.1 12 85,45
0.22 500 500 CT89.1 12 146,20
0.22 500 1000 CT90.1 12 183,85
0.22 1000 1000 CT91.1 12 184,90
0.45 150 150 CT92.1 12 74,70
0.45 250 250 CT93.1 12 84,35
0.45 500 500 CT94.1 12 145,15
0.45 1000 1000 CT96.1 12 188,15
® Plus
Membrane (PES)
Durapore ® (PVDF)-Membranes
Features short filtration times, low protein binding
Pore size 0.1*/ 0.22 0.22 / 0.45
Design Sterile
Housing material/Lid PS/PE
Membrane-∅ 73 mm
Filtration surface 40 cm2 Max. temperature 50 °C
Connection Vacuum tube connection ∅ 6.5 - 12 mm
S

Vacuum-laboratory
SPECIAL PRICES!
LABOPORT ® -membrane controlled vacuum pump
Ideal for pumping and evacuating air and neutral or slightly aggressive
or corrosive gases and vapours.
• Voltage frequency: 230 V, 50 Hz
• Thermal switch and power fuse
• Gas and ambient temperature limit: 40 °C
• Suitable for continuous operation
• Very quiet and has minimal vibration
• Maintenance-free
• Easy-to-use
• No contamination of transferred media
Technical specifications:
Type Output Vacuum Overpress. Power Weight Connectors for
(l/min) abs. (mbar) (bar) (W) (kg) hose ID (mm)
N816.3KT.18 16 20 0.5 120 3.95 6
N816.1.2KT.18 30 160 0.5 100 3.95 6
Model Art. No. Pack Qty. €
N816.3KT.18 Y372.1 1 501,00
N816.1.2KT.18
Accessories:
Y373.1 1 518,50
Silencer C557.1 1 11,50
Hose stems for hose inner ∅ 8 mm EL44.1 1 3,50
Rotilabo ® -tube clamps
Made of polyester PBT, can be operated with one hand. Variably adjustable
up to total closing of tube. Easy on tubes, can be sterilized to +160 °C.
Melting point +225 °C.
for hose ∅ (mm) Colour Art. No. Pack Qty. €
14 red 1158.1 12 47,20
10 blue 1159.1 12 46,05
6 yellow 1160.1 12 44,10
4,5 red 1161.1 12 27,55
Set of 3 clamps of each size - 1162.1 12 43,90
NEW
at Roth
Polycarbonate dessicator
By Nalgene ® . Made of PC, fully transparent. For normal pressure and
vacuum applications. Maintains a partial pressure of 0.95 bar (95 kPa) over
a 24 hour period. Implosion safe under full vacuum if used properly.
No greasing needed. Connections for tubes with 6.35 and 9.53 mm inner ∅.
Suitable for room temperature applications only.
Delivery incl. silicon O-ring, TPE plug for use under normal pressure,
removable vacuum valve made of PP.
Please order dessicator plate separately.
External ∅ x H Inner ∅ Usable height Art. No. Pack Qty. €
(mm)
(mm) (mm)
280 x 329 251 195 PK30.1 1 88,15
Dessicator plate for polycarbonate dessicator
Metal-ceramic combination, light green. Unbreakable, i.e. if used properly in
the dessicator it is resistant to thermal shock, corrosion and breakage.
∅ (mm) Art. No. Pack Qty. €
230
Accessories:
PK31.1 1 55,90
Spare dessicator valve made of PP PK34.1 1 24,75
Rotilabo ® -vacuum silicone tubes
Temperature range -60 to +180 °C (for short periods up to +260 °C),
for vacuum. Hardness: 55 Shore A, thick-walled, opaque. Autoclavable.
Inside ∅ (mm) ∅ outside (mm) Wall thickness (mm) Art. No. VE (m) €
3 9 3 9737.1 5 29,05
4 12 4 9738.1 5 34,95
5 15 5 9740.1 5 51,20
6 12 3 9742.1 5 33,55
7 15 4 9744.1 5 74,40
8 16 4 9746.1 5 64,40
10 20 5 9747.1 5 77,20
12 22 5 T980.1 5 81,20
29

Laboratory security
Mercurisorb-ROTH ®
For speedy and easy absorption of mercury. Emits no more vapours after
absorption. Absorption capacity 1:1.
Emergency kit
With 100 g Mercurisorb-ROTH ® , gloves, scoop, brush, pasteur pipettes,
empty vessel. Recommended by BG-Chemie in their leaflet on mercury and
its compounds M 024 4/85.
h j Danger H314-H410
Type Art. No. Pack Qty. €
Emergency kit in plastic case 9461.1 1 52,15
Emergency kit in carton 9461.4 1 41,40
Refill pack 250 g 9461.2 1 73,65
Refill pack 1000 g 9461.3 1 288,65
Mercury
is, at room temperature, a liquid metal, (freezing point -38.84 °C,
boiling point 356.95 °C). Saturation pressure at room temperature is only 0.0013 mm.
Mercury vapours are highly toxic and can often lead to chronic mercury poisoning.
Inhaled mercury accumulates in the human organ‘s and can be secreted only very slowly
with the urine. Mercury should therefore always be stored in closed containers and
should only be used in well-ventilated rooms with a respiratory filter (e.g. screw-top filter
Hg-P3 up to 0.5 Vol %).
Rhodia ® -sorb-fleece wipes
For speedy absorption of oil and organic liquids. Repel water, do not fluff.
Suitable for emergency measures during oil accidents. Capacity per wipe
270 g oil, 400 g other liquids. Size 30 x 30 cm.
Art. No. Pack Qty. €
5128.2 50 21,40
30
SPECIAL PRICES!
Carl Roth - Over 130 years of experience in dealing with chemicals
Sekuroka ® -waste disposal stations
For collecting chemical waste. Canisters come in different colours for easy
distinguishing of waste. The funnels come with a sieve on the inside to catch
solids.
4-place waste disposal station
Four canisters (10 l) made of HDPE with 4 funnels ∅ 120 mm
and spillage tub made of PP.
Dimensions with open lids: L 870 x W 370 x H 610 mm.
Colour Art. No. Pack Qty. €
assorted
1-place waste disposal station
5074.1 1 377,55
One canister (10 l) made of HDPE with one funnel ∅ 120 mm
and spillage tub made of PP.
Dimensions with open lid: L 240 x W 370 x H 610 mm.
Colour Art. No. Pack Qty. €
natural 5084.1 1 188,35
yellow 5087.1 1 188,35
green 5090.1 1 188,35
blue 5096.1 1 188,35
Sekuroka ® -fire protection tub
Ideal for collecting burning liquids from laboratory devices.
Fire is extinguished due to lack of oxygen. Chrome-nickel-steel resists
heat and corrosion. Capacity approx. 13 litres. Removable inner grid.
W 450 x L 450 x H 120 mm. Weight 12 kg. DBGM 7701672
Art. No. Pack Qty. €
1658.1 * 1 483,65

Storage of light sensitive samples
Opaque centrifuge tubes
Made of brown PP. Blue screw caps made of HDPE. Sterile. For lightsensitive
materials and reactions. Conical bottom. Blue graduation and
white labelling area. DNase/RNase- and human DNA-free, non-pyrogenic
and non-cytotoxic. Temperature stable from -50 to +100 °C.
Type Maximal centrifugability (x g) Dimensions
Fixed angle rotor Oscillating rotor ∅ x H (mm)
➀ + ➁ 15 ml vials 15000 3500 17 x 120
➂ + ➃ 50 ml vials 7000 3200 29 x 115
Type Art. No. Pack Qty. €
➀ KL46.1 100 in a bag 36,05
➁ KL46.2 50 in a rack 21,40
➂ KL47.1 20 in a bag 10,55
➃ KL47.2 25 in a rack 13,80
Screw cap tubes, brown
Made of PP. Autoclavable.
❄
S
❄❄❄
• Volume 0.5 / 1.5 / 2.0 ml
• Brown screw cap tubes for storage of light-sensitive samples
• Temperature stable from -196 to 121 °C
• Conical micro-centrifuge tubes can be centrifuged up to 20 000 x g
• Certified RNase-/DNase-/DNA- and pyrogen free
• Screw-on lid made of PP with silicone sealing
• Only 1¼ turns needed for speedy opening and closing of lid
• Lid inserts are also available for easy identification (see CK72.1 ff.)
Delivery without lids, please order separately!
Capacity (ml) Design Art. No. Pack Qty. €
0,5 self-standing CK47.1 1000 63,45
1,5 self-standing CK48.1 1000 63,45
1,5 conical CK49.1 1000 63,45
2,0 self-standing CK50.1 1000 63,45
2,0 conical CK51.1 1000 63,45
Screw-on lids (PP) with silicone sealing
Suitable for screw cap tubes, brown.
Colour Design Art. No. Pack Qty. €
red attached CK52.1 1000 95,70
white attached CK53.1 1000 95,70
red loose CK54.1 1000 84,95
white loose CK55.1 1000 84,95
Rotilabo ® -microcentrifuge tubes, black
Made of PP, black. 1.5 ml, graduated. Autoclavable. Temperature stable
from -80 to +121 °C. Can be centrifuged up to 15 000 x g.
Ideal for storing light-sensitive samples.
Art. No. Pack Qty. €
AA80.2 1000 36,15
❄❄❄
S
❄❄
Liquid sample bags, black
WhirlPak ® . Made of LDPE. Sterile. For saving and storing light-sensitive
liquid and solid samples. With imprinted, white labelling area.
Dimensions: L 115 mm x W 230 mm, 64 µm thick. Volume 532 ml.
Art. No. Pack Qty. €
HT83.2 100 25,30
❄❄
Rotilabo ® -cryo storage boxes
Made of black PP. Ideal for storing light-sensitive samples. With 100 holes,
for 0.5 and 1.5/2 ml centrifuge tubes and for cryo vials. Max. tube height
53.3 mm. Temperature stable from -90 to +121 °C. Stackable.
Autoclavable. Dimensions: L 140 x W 140 x H 60 mm.
Suitable for Rotilabo ® -stainless steel rack P959.1.
Art. No. Pack Qty. €
N200.1 1 10,55
31

SPECIAL PRICES! SPECIAL PRICES!
Ballistol ® -oil and -spray
Mildly alkaline special oil with cleaning, conserving, protective,
regenerating, impregnating, lubricating and disinfecting properties.
Low surface tension, wets even the smallest cracks and gaps.
Does not gum or cure. Free from chlorinated hydrocarbons,
environmentally friendly and biologically degradable.
Also suitable for wood and leather.
Ballistol ® -oil
S: 7-16
Art. No. Pack Qty. €
AA74.1 Bottle 50 ml 2,65
AA74.2 Bottle 500 ml 9,65
Ballistol ® -spray
�+ R: 12 S: 23-51
Art. No. Pack Qty. €
AA75.1 Spray can 200 ml 6,40
Mini magnetic stirrer Topolino
Technical specifications:
Stirring volume (H 2 O) 250 ml
Speed range 300 to 1800 min -1
Platform size ∅ 80 mm
Dimensions (W x D x H) 95 x 110 x 40 mm
Power supply 230 V, 50/60 Hz
Delivery incl. power unit.
Art. No. Pack Qty. €
KE48.1 1 59,00
Phone
+49 721/56 06 510
FAX
+49 721/56 06 111
E-MAIL
info@carlroth.com
INTERNET
www.carlroth.com
Carl Roth GmbH + Co. KG
Schoemperlenstraße 3-5
Roti ® -Tape-marking tapes starter set
Set consists of 1 metal-tape dispenser (L314.1) and 10 rolls marking tape
(13 mm x 12.7 m) in the colours white, red, blue, green, yellow, orange,
beige, salmon, violet, and lavender. Spare tapes see catalogue 2001, p.487.
Art. No. Pack Qty. €
AL85.1 1 75,05
Safety pipetting bulbs
Made of natural rubber. For volumetric and graduated pipettes.
Glass ball valve is opened by pressing marked point.
Standard model
For pipettes up to 10 ml. Total length 125 mm, weight 50 g.
Art. No. Pack Qty. €
0251.1 1 4,85
Universal model
For pipettes up to 100 ml, with ∅ up to 9 mm.
Total length 152 mm, weight 58 g.
Art. No. Pack Qty. €
PC78.1 1 5,05
For ordering and information about prices and delivery
in your country please contact us or your local distributor.
www.carlroth.com - about - representatives
76185 2 Karlsruhe Bestellung zum Nulltarif Tel. 0800/5699 All supplies and 000 deliveries · Fax are 0721/5606 subject to the 149 terms · and www.carlroth.de conditions of sale and delivery · bestellungen@carlroth.de
of Carl Roth GmbH + Co. KG, Karlsruhe