Compressor Technology - Sweb.cz
Compressor Technology - Sweb.cz
Compressor Technology - Sweb.cz
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Compressor</strong> <strong>Technology</strong><br />
1
Luna focuses on compressed air<br />
Under the slogan Luna OnAir, we present a comprehensive compressed air offering comprising the brands<br />
Ferax, Luna and Abac.<br />
We hope that this catalogue will be a helpful guide when choosing a compressor with the different options<br />
currently available. We also want to spread relevant information about the compressed air concept in its<br />
entirety in order to increase the level of knowledge. In addition to a wide range of all sorts of accessories,<br />
Luna also offers a range of services, warranties, service and spare parts in the concept. The goal is for Luna<br />
OnAir to be the best compressed air offering.<br />
Right compressor for your needs<br />
You should base your choice of compressor on what is to be driven and the pressure and flow required.<br />
To help, you can use the specifications in the tables. You should always include a degree of over<br />
capacity to be on the safe side.<br />
The questions that are good to get answers to before choosing your compressor are:<br />
• How large is the air requirement?<br />
• What working pressure is required?<br />
• What are the requirements on air quality?<br />
• Where will the compressor be located?<br />
• Is there enough power in the building?<br />
When the need is identified, the following should be answered:<br />
• Max. load rate?<br />
• Connection cable, length, cross section?<br />
• Ventilation, supply and exhaust air.<br />
• Sound level? Depending on location, what is acceptable?<br />
• Service accessibility?<br />
When you can answer most of these questions, your compressed air dealer will then help you to<br />
choose the right compressor.<br />
3
This is how you choose<br />
the right compressed air option<br />
Vinkel-/Bandslipmaskin Angle<br />
Angle<br />
grinder/Belt<br />
grinder/Belt<br />
sander<br />
sander<br />
Exc.-/Osc slipmaskin Exc./Osc<br />
Exc./Osc<br />
grinding<br />
grinding<br />
machine<br />
machine<br />
Mutterdragare Impact 3/4" Impact - 1" wrench<br />
wrench<br />
3/4"<br />
3/4"<br />
– 1"<br />
– 1"<br />
Angle Chisel/Needle grinder/Belt sander<br />
Mejsel-/Nålhammare Chisel/Needle<br />
scaler<br />
Exc./Osc grinding scaler machine<br />
Filmaskin<br />
Filing machine<br />
Impact Filing wrench machine 3/4" – 1"<br />
Plåtsåg<br />
Chisel/Needle Plate<br />
Plate<br />
saw scaler saw<br />
Borrmaskin/Skruvdragare<br />
Drilling machine/Power Filing machine<br />
Drilling machine/Power driver<br />
driver<br />
Hand plate shears/Nibbler/ Blasting Plate gun saw<br />
Hand Handplåtsax/Nibbler/Blästerpistol<br />
plate shears/Nibbler/ Drilling machine/Power Blasting gun driver<br />
Mutterdragare Impact wrench 3/8" – 1/2"<br />
Hand Impact plate 3/8" shears/Nibbler/ wrench - 1/2" 3/8" Blasting – 1/2" gun<br />
Vinkelmutterdragare Angled<br />
Angled<br />
impact<br />
impact Impact wrench 3/8" wrench wrench - 1/2" 3/8"<br />
3/8" – 1/2"<br />
– 1/2"<br />
Blåspistol/Oljeduschspruta<br />
Angled impact Blowgun/Oil wrench 3/8" sprayer – 1/2"<br />
Blowgun/Oil sprayer<br />
Blowgun/Oil Spot blaster sprayer<br />
Punktbläster<br />
Spot Spot blaster blaster<br />
Spik-/Dyckertpistol/Gravyrpenna<br />
Nail/Brad<br />
Nail/Brad gun/Engraving pen<br />
Nail/Brad gun/Engraving pen pen<br />
Vinkelmutterdragare Angled<br />
Angled Angled impact 1/4" impact impact wrench<br />
wrench wrench 1/4"<br />
1/4" 1/4"<br />
Hål-/Falstång/Nitpistol<br />
Hole/Folding<br />
Hole/Folding pliers/Rivet<br />
pliers/Rivet gun gun<br />
Luftpåfyllare<br />
Air pump<br />
Air pump<br />
Paint spray gun<br />
Färgspruta<br />
Paint spray gun<br />
gun<br />
4<br />
1.5 hp OL1.5<br />
1.5 hk hp OL<br />
1.5 hp OL<br />
1.5 hp 1.5 hk hp<br />
2.0 hp 1.5 hp<br />
2.0 hk hp<br />
2.5 hp 2.0 hp<br />
2.5 HK hp<br />
3.0 hp Sack barrow model<br />
2.5 hp<br />
3.0 hp Twin 3.0 Tank hk hp Säckk.modell Sack barrow model<br />
3.0 hp Sack barrow model<br />
3.0 hp Vertical 3.0 hk hp Twin Tank<br />
3.0 hp Belt drive 3.0 hp Twin Tank<br />
3.0 hk hp Vertikal Vertical<br />
3.0 hp Sound 3.0 att. hp Vertical<br />
3.0 hk hp Remdriven Belt drive<br />
4.0 hp Belt drive 3.0 hp Belt drive<br />
3.0 hk hp Ljuddämpad Sound att.<br />
5.5 hp Belt drive<br />
3.0 hp Sound att.<br />
7.5 hp Belt 4.0 drive hk hp Remdriven Belt drive<br />
4.0 hp Belt drive<br />
7.5 hp 15 5.5 Bar 5.5 hk hp Remdriven Belt drive<br />
10.0 hp Belt 5.5 drive hp Belt drive<br />
7.5 hk hp Remdriven Belt drive<br />
10.0 hp 15 Bar 7.5 hp Belt drive<br />
7.5 7.5 hk hp 15 15 Bar<br />
7.5 hp 15 Bar<br />
10.0 hk hp Remdriven Belt drive<br />
10.0 hp Belt drive<br />
10.0 hk hp 15 15 Bar<br />
10.0 hp 15 Bar<br />
Recommended<br />
Recommended<br />
Acceptable Recommended<br />
Går utmärkt<br />
Not Acceptable<br />
Acceptable recommended<br />
Acceptabelt<br />
Not<br />
Not<br />
recommended<br />
recommended<br />
Mindre lämpligt
Calculate your compressed air requirement<br />
Equipment Air consumption l/min Utilization factors in activities 1<br />
Industry Service<br />
Drill 6.5 mm 420 0,2 0,1<br />
Drill 10 mm (Pistol/Straight) 550 0,2 0,1<br />
Drill 13 mm 635 0,2 0,1<br />
Angle grinder 5" 900 0,2 0,2<br />
Angle grinder 7" 1600 0,1 0,1<br />
Eccentric rotating 150 ᴓ 500 0,1 0,2<br />
Straight grinding machine small 330 0,2 0,2<br />
Straight grinding machine large 550 0,2 0,1<br />
Angled impact wrench 750 0,1 0,2<br />
Impact wrench ⅜" 550 0,2 0,2<br />
Impact wrench ½" 900 0,2 0,2<br />
Impact wrench 1" 1400 0,2 0,2<br />
Power driver small 400 0,1 0,05<br />
Power driver large 700 0,1 0,05<br />
Plate saw 300 0,05 0,1<br />
Chipping hammer 400 0,1 0,05<br />
Chisel hammer 650 0,1 0,05<br />
Blowgun 350 0,05 0,05<br />
Small blaster gun 300 0,1 0,2<br />
Example: Garage<br />
2 × Impact wrench ½" 2 × 900 × 0.2 = 360<br />
1 × Eccentric rotating 150 ᴓ 1 × 500 × 0,2 = 100<br />
3 × Blowguns 3 × 350 × 0.05 = 53<br />
Total consumption 513<br />
Addition for leakage 10% 51.3<br />
Reserve for future use 30% 153.9<br />
Basis for the selection of the compressor 718.2<br />
The degree of utilization must be taken into consideration when choosing a compressor. For a<br />
screw compressor, a 70% utilization rate can be chosen, which in this case gives an appropriate<br />
compressor capacity of 1 026<br />
For a reciprocating compressor, a 50% utilization rate can be chosen, which normally is 1 436.<br />
The number of machines that can simultaneously be in operation must also be taken into account.<br />
1 The utilization factor can vary greatly within different application areas. The given values can only be used as a guide.<br />
5
<strong>Compressor</strong> technology for all needs<br />
Small reciprocating compressors for customers<br />
with a small compressed air requirement. The<br />
range consists of compressors between 1.5 to<br />
3.0 hp (1.1–2.2 kW). Covers most air needs between<br />
70 and 250 l/min. FAD<br />
Reciprocating compressors in a standard design for<br />
professional users. The range consists of compressors<br />
between 1.5 to 10 hp (1.1–7.5 kW). Covers most air<br />
needs between 100 and 900 l/min. FAD<br />
Special compressors and accessories, mainly<br />
for stationary installations in industry. The<br />
range consists of sound attenuating, vertical<br />
15 bar compressors and screw compressors<br />
in different sizes. Covers most air needs between<br />
250 and 12 000 l/min. FAD<br />
66
<strong>Compressor</strong>s for construction sites.<br />
Designed to be manageable and durable to meet the high demands of the construction industry.<br />
Available in portable and transportable models.<br />
The construction compressors are available in several designs:<br />
OL-1.5 hp, 10 litres<br />
18372-0101<br />
Small portable compressor<br />
with a maximum pressure of<br />
8 bar. Best suitable for brad and<br />
staple guns, for indoor use.<br />
ACD 3.0-24BT, 230 V-1<br />
21132-0205<br />
Transportable sack barrow<br />
model with a maximum pressure<br />
of 10 bar. Solid rubber<br />
wheels. Powerful compressor<br />
that can handle 3"– 4" nails,<br />
for outdoor nailing.<br />
Service and aftermarket services<br />
Our aim is always to exceed our customers’ requirements and expectations. Our customers should<br />
feel confident in obtaining the right product and a quality to satisfy their needs. We strive for good<br />
and professional relationships with our customers and want them to perceive Luna as a truly highperformance<br />
partner that can help increase productivity.<br />
All original parts are manufactured to the same quality standards as the compressors. You can therefore be<br />
sure that your production maintains the same high level even after your compressor has been serviced.<br />
Our distribution system means you can be assured of a<br />
quick delivery of the original parts you require.<br />
Our service and organisation partners can be found in all<br />
countries. Repair and service is carried out on all compressed<br />
air equipment, regardless of manufacturer.<br />
The best way to safeguard your interests is to take care<br />
of the equipment in the best possible way.<br />
ACD 3.0-22 BD, 230 V-1<br />
21133-0105<br />
Transportable Twin tank model<br />
with a maximum pressure<br />
of 10 bar. Solid rubber wheels.<br />
Powerful compressor that<br />
can handle 3"– 4" nails, for<br />
outdoor nailing.<br />
7
Compressed air technology in brief<br />
In the concept of compressed air technology a range of parameters are housed that are important to know in<br />
order to select the right compressor, and to achieve optimum operation for your specifi c needs and requirements.<br />
On the following pages we intend to go into the subject in detail. We start with size.<br />
The size is a measure of the compressor’s ability to deliver compressed air, i.e. the combined capacity of the<br />
compressor block and the electric motor. In Europe the fl ow that we are speaking is normally stated as Free Air<br />
Delivery (FAD) in litres/minute or litres/second. In order to give the compressor a buffer with compressed air,<br />
you usually have an air reservoir next to the block, but the size of the air reservoir says nothing about the size of<br />
the compressor, which is mainly determined by the power of the electric motor and the block’s capacity.<br />
An electric compressor comprises, among others, of:<br />
1. <strong>Compressor</strong> block<br />
2. Electric motor<br />
3. Push bar switch<br />
4. Non-return valve<br />
5. Tank<br />
The push bar switch controls the operation and in<br />
this is a Max/Delta pressure preset, i.e. the pressure<br />
interval in which the compressor works. The maximum<br />
pressure and Delta pressure are adapted for any<br />
given compressor, its fuse protection, safety valves and<br />
should not be modifi ed by non-authorized persons.<br />
8<br />
4<br />
1<br />
2<br />
5<br />
3
Reciprocating compressors<br />
The models are available as Direct or Belt-driven, Oil lubricated or Oil-free, and in one or two stage designs.<br />
When compression is created, the piston pushes the air pass the valve plate in the cylinder head. This process<br />
also generates heat, which on most models is air-cooled. Two stage models also have a cooler between stages<br />
and it is exactly the cooling that increases the efficiency2 of these models. The load rate3 normally lies at about<br />
50% on direct drive models, or at about 70% on belt-driven models.<br />
Screw compressors<br />
The compression is created by two screw-shaped profiles with a very accurate fit. The air is compressed<br />
mixed with oil, where the function of the oil is to cool and lubricate. Before the process is<br />
complete, the oil is separated from the compressed air in the separator filter. The process is normally<br />
monitored by electronics and the load rate3 is 100%, thanks to the oil cooling.<br />
Cooling and ventilation<br />
<strong>Compressor</strong>s create a lot of heat. The physical laws give a rise in temperature at a specific compression.<br />
As an example of this, we can mention that at the valve plate on a reciprocating compressor with<br />
a maximum working pressure of 10 bar and at full operation, a temperature of about 200 °C is<br />
reached. It is therefore important that the compressor is placed in a well-ventilated room. The basic<br />
rule is that the ventilation area, needed to dissipate heat from the compressor room, must be at<br />
least double the size of the compressor fan’s area. (1 × the area in the room at floor level + 1 × the<br />
area out of the room at ceiling level.)<br />
2 The degree of efficiency characterizes how efficiently a system converts energy into some form of useful work. In practice the degree of<br />
efficiency is always less than 1, since all true systems are affected by some form of energy loss. A drop in temperature has a positive effect<br />
on efficiency and in this way can improve utilization of the supplied energy.<br />
3 The load rate denotes the amount of the total operating time that the compressor can be fully loaded.<br />
9
Air quantity<br />
The compressor produces a specific flow (capacity), air quantity or volume/time. The capacity is<br />
usually presented in m³/min, l/min or l/s and states at what pressure it was measured. The value is<br />
called Free Air Delivery (FAD) (Example, ACB 10-270 gives 970 l/min FAD at 6.3 bar.) The measurement<br />
standard used is ISO 1217.<br />
Air pressure<br />
The compressed air is compressed to a given maximum pressure, generally from 8 to 10 bar. (Higher pressures<br />
can occur.) The pressure at each point of use is adjusted by means of a regulator and is determined<br />
by the application. Producers of air tools, air motors, paint sprayers and pneumatics normally state at what<br />
pressure their products should be used. Examples of required operating pressure for different applications:<br />
• Ordinary cleaning/blowgun, about 6–8 bar<br />
• Ordinary air motors, grinding machines, impact wrenches, about 6–7 bar<br />
• Paint sprayers, about 2–4 bar<br />
• Pneumatics, cylinders, typically 5-7 bar<br />
Air Quality<br />
Compressed air is used in everything from workshops to laboratory environments and<br />
consequently the demands on compressed air quality differ. Typical criteria considered are:<br />
• Water/oil content • Particle content<br />
• Sterility • Odour/taste<br />
Large compressor installations are usually equipped with post-treatment of the<br />
compressed air to conform to the different needs.<br />
Airflow<br />
To get the most out of your compressor, you should always think about the airflow that you will need.<br />
Hose size, length and the type of hose to be used have a far-reaching effect on the result.<br />
Example:a straight hose with an inside diameter of 6 mm and a length of 3 metres can give 360 l/min. The<br />
same hose in a longer design, for example 10 metres, only gives 200 l/min. If, however, you choose a straight<br />
hose with an inside diameter of 9 mm and a length of 10 metres, the flow in the hose can reach 535 l/min.<br />
When using 3”– 4” nail guns, you should therefore select a hose that has an inside diameter of at least<br />
9 mm in order to be sure that the tool can perform the work. Large compressor installations are usually<br />
equipped with post-treatment of the compressed air to conform to the different needs.<br />
Ø Dim Length Capacity l/m<br />
meter Straight Rolled<br />
¼"– 6 mm 3 360<br />
10 200<br />
50 108 100<br />
⅜" 10 535 510<br />
50 300 285<br />
½" 10 805 700<br />
10
Ferax direct drive compressors<br />
Portable single stage reciprocating compressors equipped with overvoltage protection. Suitable<br />
for cars, in garages and workshops. Ideal for craftsmen, plumbers, painters, etc.<br />
Art. no. 18372-0101 12919-0104 16908-0109<br />
Ferax 1.5 - 10 OL 2HP-O 3.0-50V<br />
<strong>Compressor</strong> block 1-stage FC 2/24 1-stage 1-stage<br />
Motor voltage V 230 1-phase 230 1-phase 230 1-phase<br />
Fuse (inert) A 10 10 10<br />
Throughput cylinder volume l/min 140 230 356<br />
Throughput cylinder volume l/sec 2.3 3.8 5.9<br />
Free air delivery* l/min 70 140 180<br />
Free air delivery* l/sec 1.17 2.3 3.0<br />
Max working pressure bar 8 8 10<br />
Air container volume l 10 24 50<br />
Sound level dB (A) 94 94 97<br />
Motor output kW (hp) 1.1 (1.5) 1.5 (2) 2.2 (3.0)<br />
<strong>Compressor</strong> block speed rpm 2850 2850 2850<br />
Dimensions L×W×H mm 550×250×560 600×275×590 830×350×650<br />
Weight kg 15.5 25 45<br />
* At 6 bar.<br />
Advantages<br />
• Good performance:Ferax compressors have a sturdy design and use high quality components.<br />
• Easy maintenance Easily accessible components to facilitate maintenance.<br />
• Perfectly dimensioned: Compact models for users with smaller needs.<br />
11
Ferax belt drive compressors<br />
Portable single stage, belt driven reciprocating compressors equipped with overvoltage protection.<br />
Suitable for cars, in garages and workshops. Ideal for craftsmen, plumbers, painters, etc.<br />
Art. no. 16906-0100 16902-0104 17914-0108<br />
Ferax 2.0-50VB 3.0-100B 3.0-200B<br />
<strong>Compressor</strong> block 1-stage 1-stage 1-stage<br />
Motor voltage V 230 1-phase 230 1-phase 230 1-phase<br />
Fuse (inert) A 10 16 16<br />
Throughput cylinder volume l/min 250 320 320<br />
Throughput cylinder volume l/sec 4.2 5.3 5.3<br />
Free air delivery* l/min 109 180 180<br />
Free air delivery* l/sec 1.8 3.0 3.0<br />
Max working pressure bar 10 10 10<br />
Air container volume l 50 100 200<br />
Sound level dB (A) 96 95 95<br />
Motor output kW (hp) 1.5 (2.0) 2.2 (3.0) 2.2 (3.0)<br />
<strong>Compressor</strong> block speed rpm 2800 2850 2850<br />
Dimensions L×W×H mm 830×350×670 1025×435×845 1420×400×900<br />
Weight kg 55 69 75<br />
* At 6 bar.<br />
Advantages<br />
• Good performance:Ferax compressors have a sturdy design and use high quality components.<br />
• Easy maintenance Easily accessible components to facilitate maintenance.<br />
• Perfectly dimensioned: Compact models for users with smaller needs.<br />
12
Luna direct drive compressors<br />
Portable single stage direct drive reciprocating compressors equipped with overvoltage protection.<br />
Oil lubricated. Suitable for basic maintenance, craftwork, plumbers, painting, etc.<br />
Art. no. 21247-0108 21246-0109 21246-0208<br />
Luna ACD1.5 - 24 OL ACD1.5 - 24 ACD2.0-24<br />
<strong>Compressor</strong> block 1-stage 1-stage 1-stage<br />
Motor voltage V 230 1-phase 230 1-phase 230 1-phase<br />
Fuse (inert) A 10 10 10<br />
Throughput cylinder volume l/min 140 187 232<br />
Throughput cylinder volume l/sec 2.3 3.1 3.9<br />
Free air delivery* l/min 80 131 163<br />
Free air delivery* l/sec 1.3 2.2 2.7<br />
Max working pressure bar 8 8 8<br />
Air container volume l 24 24 24<br />
Sound level dB (A) 94 92 92<br />
Motor output kW (hp) 1.1 (1.5) 1.1 (1.5) 1.5 (2)<br />
<strong>Compressor</strong> block speed rpm 2850 2850 2850<br />
Dimensions L×W×H mm 575×270×605 575×270×625 575×270×625<br />
Weight kg 21 21 22<br />
Art. no. 21246-0307 21132-0205 21133-0105 21134-0104<br />
Luna ACD2.5-24 ACD3.0-24BT ACD3.0-22BD ACV3.0-50BT<br />
<strong>Compressor</strong> block 1-stage GV 34 1-stage GV 34 1-stage GV 34 1-stage<br />
Motor voltage V 230 1-phase 230 1-phase 230 1-phase 230 1-phase<br />
Fuse (inert) A 10 16 16 16<br />
Throughput cylinder volume l/min 265 340 340 340<br />
Throughput cylinder volume l/sec 4.4 5.7 5.7<br />
Free air delivery* l/min 195 248 248 248<br />
Free air delivery* l/sec 3.3 4.1 4.1<br />
Max working pressure bar 8 10 10 10<br />
Air container volume l 24 24 11 +11 50<br />
Sound level dB (A) 94 93 93 93<br />
Motor output kW (hp) 1.9 (2.5) 2.2 (3.0) 2.2 (3.0) 2.2 (3.0)<br />
<strong>Compressor</strong> block speed rpm 2850 1450 1450 1450<br />
Dimensions L×W×H mm 575×270×625 520×520×960 650×790×670 520×520×960<br />
Weight kg 29 48 60 50<br />
* At 6 bar.<br />
Advantages<br />
• High operating reliability:Luna ACD has a sturdy design and uses high quality components, which improves<br />
both performance and longevity.<br />
• Small power losses: Pressure relief valves with low power consumption at start-up and which ensure safer<br />
operation.<br />
• Easy operation and maintenance: Easily operated controls and good access to components.<br />
• Cast iron cylinder, aluminium cylinder head: Optimize heat generation and provide a more efficient compressor.<br />
13
Luna belt driven compressors<br />
Portable and stationary reciprocating compressors with air tank and belt-driven motors. Oil lubricated.<br />
Suitable for use in garages and workshops as well as for craftsmen, carpenters, plumbers, painters, etc. in<br />
connection with maintenance work.<br />
Art. no. 21225-0104 21225-0203 21226-0103 21226-0202 21226-0301<br />
Luna ACB3.0-50T ACB4.0-90T ACB5.5-150S ACB7.5-200S ACB10-270S<br />
<strong>Compressor</strong> block 1-stage 2-stage 2-stage 2-stage 2-stage<br />
Motor voltage V 230 1-phase 400 3-phase 400 3-phase 400 3-phase 400 3-phase<br />
Fuse (inert) A 16 16 16 20 25<br />
Throughput cylinder volume l/min 387 514 660 1023<br />
1210<br />
Throughput cylinder volume l/sec 6.4 8.6 11.0 17.0 20.2<br />
Free air delivery* l/min 270 360 530 820 970<br />
Free air delivery* l/sec 4.5 6.0 8.8 13.7 16.2<br />
Max working pressure bar 10 11 11 11 11<br />
Air container volume l 50 90 150 200 270<br />
Sound level dB (A) 77 76 77 78 78<br />
Motor output kW (hp) 2.2 (3.0) 3.0(4.0) 4.0 (5.5) 5.5 (7.5) 7.5 (10)<br />
<strong>Compressor</strong> block speed rpm 1100 1400 1100 1100 1300<br />
Dimensions L×W×H mm 940×410×800 1000×410×820 1380×420×950 1580×580×1170 1520×600×1250<br />
Weight kg 57 74 95 168 191<br />
* At 6 bar.<br />
Advantages<br />
• Cast iron cylinder with large aluminium cylinder head: Luna ACB has a sturdy cast-iron cylinder with<br />
a large aluminium head to provide efficient cooling and improved performance.<br />
• Steel valve plate:A steel valve plate gives more reliable operation, a longer life and higher performance.<br />
• Short stoke length: Increased FAD, low speed which gives increased performance and a long life.<br />
• Large crankcase: More efficient lubrication and cooling for continuous operation and a longer life.<br />
• Two-stage pumps: Intermediate cooling channels giving an increased load factor and greater efficiency.<br />
14
ABAC reciprocating compressors<br />
Powerful, stationary, belt driven reciprocating compressors with cast iron cylinder block. A reliable<br />
and well-balanced design with effective cooling and high efficiency. Suitable for garages and workshops<br />
where the need of air is great.<br />
Vertical<br />
Art. no. 18396-0103 18396-0202<br />
ABAC B3800B/150 VM3 B5900B/270 VT5.5<br />
<strong>Compressor</strong> block B3800B/ 1-stage B5900B/2-stage<br />
Motor voltage V 230 1-phase 400 3-phase<br />
Fuse (inert) A 16 20<br />
Throughput cylinder volume l/min 387 660<br />
Throughput cylinder volume l/sec 6.5 11.0<br />
Free air delivery* l/min 270 530<br />
Free air delivery* l/sec 4.5 8.8<br />
Max working pressure bar 10 11<br />
Air container volume l 150 270<br />
Sound level dB (A) 75 71<br />
Motor output kW (hp) 2.2 (3.0) 4.0 (5.5)<br />
<strong>Compressor</strong> block speed rpm 1100 1400<br />
Dimensions L×W×H mm 850×970×1950 850×970×2100<br />
Weight kg 160 210<br />
* At 6 bar.<br />
15 bar<br />
Art. no. 18397-0102 18397-0201<br />
ABAC B6000/500 15 bar B7000/500 15 bar<br />
<strong>Compressor</strong> block B6000/2-stage B7000/2-stage<br />
Motor voltage V 400 3-phase 400 3-phase<br />
Fuse (inert) A 20 25<br />
Throughput cylinder volume l/min 570 930<br />
Throughput cylinder volume l/sec 9.5 15.5<br />
Free air delivery* l/min 399 651<br />
Free air delivery* l/sec 6.7 10.9<br />
Max working pressure bar 15 15<br />
Air container volume l 500 500<br />
Sound level dB (A) 74 73<br />
Motor output kW (hp) 5.5 (7.5) 7.5 (10)<br />
<strong>Compressor</strong> block speed rpm 1000 1000<br />
Dimensions L×W×H mm 2030×670×1400 2030×670×1400<br />
Weight kg 290 290<br />
* At 6 bar.<br />
16
Advantages<br />
• Cast iron cylinder with large aluminium cylinder head: ABAC Vertical and 15 bar compressor has a<br />
robust cast iron cylinder with a large aluminium head to provide efficient cooling.<br />
• Steel valve plate: A steel valve plate gives more reliable operation, a longer life and higher performance.<br />
• Short stoke length: Increased FAD, low speed which gives increased performance and a long life.<br />
• Large crankcase: More efficient lubrication and cooling for continuous operation and a longer life.<br />
• Two-stage pumps: Intermediate cooling channels giving an increased load factor and greater efficiency.<br />
17
Sound attenuated<br />
Art. no. 18398-0200<br />
ABAC B2800B/LN/M3<br />
<strong>Compressor</strong> block B2800B/2-stage<br />
Motor voltage V 230 1-phase<br />
Fuse (inert) A 16<br />
Throughput cylinder volume l/min 320<br />
Throughput cylinder volume l/sec 5.3<br />
Free air delivery* l/min 240<br />
Free air delivery* l/sec 4.0<br />
Max working pressure bar 10<br />
Air container volume l 27<br />
Sound level dB (A) 65<br />
Motor output kW (hp) 2.2 (3.0)<br />
<strong>Compressor</strong> block speed rpm 1570<br />
Dimensions L×W×H mm 780×470×960<br />
Weight kg 87<br />
* At 6 bar.<br />
18<br />
Advantages<br />
• Silent operation: Sound attenuated<br />
ABAC-compressor as standard<br />
equipped with sound attenuated<br />
hood. The compressor keeps a low<br />
noise level of 65 dB (A).<br />
• Copper pressure line: In order to<br />
reduce heat generation, a copper<br />
pressure line has been used to give<br />
a lower air temperature.<br />
• After cooler with large flanges:<br />
Optimizes heat generation, and<br />
provides more efficient cooling<br />
of the compressor.
ABAC screw compressors<br />
Stationary, silent screw compressors for professional use. Immediately ready for use through electrical<br />
connection. Suitable for, among others, industry, garages and workshops.<br />
Art. no. 18399-0100 18399-0209 18399-0308<br />
ABAC Micron/200L/5.5 Micron/270L/7.5 Micron/270L/10<br />
Motor voltage V 400 3-phase 400 3-phase 400 3-phase<br />
Fuse (inert) A 16 20 25<br />
Free air delivery* l/min 495 641 802<br />
Free air delivery* l/sec 13.3 10.7 13.4<br />
Max working pressure bar 8 8 10<br />
Air container volume l 200 270 270<br />
Sound level dB (A) 76 78 77<br />
Motor output kW (hp) 4 (5.5) 5.5 (7.5) 7.5 (10)<br />
Dimensions L×W×H mm 1440×680×1250 1550×680×1280 1550×680×1280<br />
Weight kg 122 137 193<br />
* At 6 bar.<br />
Advantages<br />
• Easy-to-use.The Micron screw compressor has a basic display for easy operation and adjustments<br />
as required.<br />
• Easy maintenance: It is easy to access all components to easily manage maintenance and servicing of<br />
the Micron screw compressor.<br />
• Easy installation.Micron screw compressor is an “all in one” compressor, which means that installation is<br />
very easy.<br />
19
ABAC refrigerant type dryer<br />
Refrigeration dryers designed to remove water from the compressed air through a single cooling<br />
process. Cooled using Freon R 134a. The condensed water is separated in the centrifugal separator,<br />
which automatically removes the condensate through the condensation drain.<br />
Art. no. 18400-0107 18400-0206 18400-0305 18400-0404<br />
ABAC AD-20 Ad-25 AD-45 AD-60<br />
Supply voltage V 230 1-phase/50HZ 230 1-phase/50HZ 230 1-phase/50HZ 230 1-phase/50HZ<br />
Max. capacity l/min 333 417 750 1000<br />
Max. capacity m³/h 20 25 45 60<br />
Max working pressure bar 16 16 16 16<br />
Connection thread G (R) ¾" ¾" ¾"<br />
Dimensions L×W×H mm 350×500×450 350×500x450 350×500×450 350×500×450<br />
Weight kg 19 19 19 20<br />
Art. no. 18400-0503 18400-0602 18400-0701 18400-0800<br />
ABAC AD-85 AD-130 AD-165 AD-210<br />
Supply voltage V 230 1-phase/50HZ 230 1-phase/50HZ 230 1-phase/50HZ 230 1-phase/50HZ<br />
Max. capacity l/min 1417 2167 2750 3500<br />
Max. capacity m³/h 85 130 165 210<br />
Max working pressure bar 16 16 13 13<br />
Connection thread G (R) ¾" ¾" 1" 1"<br />
Dimensions L×W×H mm 350×500×450 350×500×450 370×500×764 370×500×764<br />
Weight kg 25 27 44 44<br />
Advantages<br />
• Extends the life of the equipment and improves the quality of the compressed air.<br />
• Increases reliability and reduces the risk of leakage from the compressed air system.<br />
• Low energy consumption, due to the energy saving function.<br />
• Good environmental protection, no CFC gases which affect the climate.<br />
21
ABAC tanks<br />
Vertical pressure tanks made and tested according to applicable CE-standards. Supplied complete<br />
with valve assembly including safety valve, pressure gauge, ball valve, plugs and drain valve.<br />
Art. no. 18401-0106 18401-0205<br />
ABAC APT-100/11 APT-200/11<br />
Air container volume l 100 200<br />
Max working pressure bar 11 11<br />
Connection thread G (R) ¾" – ½" 1" – ½"<br />
Overall height mm 1200 1550<br />
Diameter mm 370 450<br />
Weight kg 37 62<br />
Art. no. 18401-0304 18401-0403<br />
ABAC APT-270/11 APT-500/11<br />
Air container volume l 270 500<br />
Max working pressure bar 11 11<br />
Connection thread G (R) 1" – ¾" ¾"+1" – ¾"+1"<br />
Overall height mm 1650 2100<br />
Diameter mm 500 600<br />
Weight kg 80 135<br />
Art. no. 18401-0502 18401-0601<br />
ABAC APT-720/11 APT-900/12<br />
Air reservoir volume l 720 900<br />
Max working pressure bar 11 12<br />
Connection thread G (R) ¾"+1" – ¾"+1" 1½"–1"<br />
Overall height mm 2050 2500<br />
Diameter mm 750 800<br />
Weight kg 180 230<br />
Art. no. 18401-0700 18401-0809<br />
ABAC APT-1000/12 APT-2000/12<br />
Air reservoir volume l 1000 2000<br />
Max working pressure bar 12 12<br />
Connection thread G (R) 2"–2" 2"–2"<br />
Overall height mm 2500 2500<br />
Diameter mm 800 1100<br />
Weight kg 230 330<br />
22