SC Pro Technical Data Sheet
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Material <strong>Pro</strong>perties<br />
<strong>SC</strong>-PRO is a two-component styrene-free vinylester glass spinning capsule adhesive anchoring system. It has better resistance to<br />
moisture and better chemical resistance. The properties listed below apply to the <strong>SC</strong>-PRO.<br />
<strong>Pro</strong>perty<br />
Value<br />
Mixed Colour<br />
Amber<br />
Mixing Ratio<br />
Factory pre-measured<br />
Consistency<br />
Paste Mortar<br />
Shelf life<br />
18 months<br />
Loading Time @ 20°C<br />
20 min<br />
Minimum Substrate Temperature - 5°C<br />
Storage<br />
Store at 5º to 25º C<br />
Setting Time<br />
The setting times listed for the <strong>SC</strong>-PRO vinylester vary according to the base material temperature. The minimum curing time is the<br />
time required for the vinylester to reach its published physical properties. In order to insure proper mixing, the capsule contents<br />
should be conditioned to 15°C prior to use.<br />
Base Material Temp (°C)<br />
≥ - 5°C<br />
≥ + 5°C<br />
≥ + 20°C<br />
≥ + 30°C<br />
Minimum Curing Time<br />
5 hours<br />
60 min<br />
20 min<br />
10 min<br />
*NOTE: Curing time is for dry concrete. Curing time must be doubled for wet concrete.<br />
6 <strong>SC</strong>-PRO <strong>Technical</strong> <strong>Data</strong> <strong>Sheet</strong>. Last modified September, 2017