Agricultural Distributor Pack_AEG_V2

georgiamcnulty

T-T Distributor Information Pack

Here is your handy guide

to working with T-T.

ttpumps.com +44 (0)1630 647200


WHO ARE T-T?

WHO ARE T-T?

T-T are your one-stop shop for everything needed to master

water management challenges. We specialise in not only

off-the shelf pumps, valves and controls but also bespoke

pumping solutions, specialist valves that are tailored to

meet your exact requirements and custom-made control

panels for your specific application.

With over 59 years experience in designing

bespoke pump systems, developing waterworks

valves and manufacturing control systems

for a range of industries, T-T are expertly

qualified to match the right products

to the right applications.

T-T AGRICULTURE

AND ENVIRONMENTAL

T-T Agriculture and Environmental is a division of T-T and

was formed to focus on effluent treatment and anti-pollution

products. Many of these products have been in our portfolio

for sometime, but demand has made us realise that many of

our clients benefit from our ability to provide a combination of

products and skills from a single source.

T-T have a distinctive advantage when dealing with sensitive

environmental systems. We are able to merge our vast

experience and expertise in pumps, controls, valves and

service with the support of our internal design capabilities.


YOUR T-T DISTRIBUTOR PERKS...

As a T-T distributor you will have two annual targets set, one to be reached within the first 6 months of the financial

year and one by the end of the financial year. If the target has been reached by the date then a percentage of that

amount will be returned to you as a credit against your account, this can be spent with us anytime before the end of the

next financial year. The financial year runs from 1 st December to 30 th November. Please note, terms and conditions do

apply and these can be found within your distributor contract.

END OF YEAR TARGET

£60,000

Produce an annual turnover

£60,000 by 30 th November

2018 to receive 1.5% back to

your account!*

£

HALF WAY TARGET

£30,000

Reach an order value of

£30,000 by 31 st May 2018

to receive 1% back to your

account!*

*Terms and conditions apply. Please see page 8 for more information.


YOUR AREA

YOUR

AREA

DISTRIBUTOR BENEFITS

- EXCELLENT DISTRIBUTOR DISCOUNTS

- TECHNICAL SUPPORT & TRAINING

- PERSONALISED ONLINE DASHBOARD

- DISTRIBUTOR PERKS

- SUPPORT WITH MARKETING MATERIALS.


DISCOUNT STRUCTURE

GL

OX

BS

SN

RG

DA

TA

BA

SP

SO

GU

RH

TN

ME

CT

EX

DT

BH

PO

BN

PL

TQ

TR

PRODUCT BAND

DISCOUNT

DELIVERY CHARGES

25% OFF LIST PRICE FREE OF CHARGE

25% OFF LIST PRICE DELIVERY EXTRA

25% OFF LIST PRICE DELIVERY EXTRA


YOUR CONTACTS

Job Title Name Email Telephone

Agricultural Sales

Engineer

Rob Lowe

rob.lowe@ttpumps.com

01630642120

07973702362

Technical Support

Samuel Howard

samuel.howard@ttpumps.

com

01630642130

Sales Director Ben Nash ben@ttpumps.com

01630642114

07767223843

Credit Facilities David Everton davideverton@ttpumps.com 01630642165

Controls Manager Jane Delicata janedelicata@ttpumps.com 01630642111

Marketing

Rebecca Jones &

Georgia McNulty

marketing@ttpumps.com 01630647200

T-T Pumps Ltd, Onneley Works, Newcastle Road, Woore, Cheshire, CW39RU

response@ttpumps.com

www.ttpumps.com

+44 (0) 1630 647200


WHAT PRODUCTS ARE AVAILABLE?

PTH SERIES

A range of high-pressure, centrifugal, chopper

pumps, ideal for particularly heavy-duty

applications.

- Multi-channel impellers and double-chopping

system

- Cast iron construction

- Mechanical seal within oil bath

- Recommended for applications that require a

substantial head and adequate chopping of the

solid materials, present in the liquid being

pumped such as umbilical and irrigation systems.

THE PTS 65-200 SERIES

A range of heavy-duty, submersible, chopping pumps,

ideal for particularly heavy applications that require a

preliminary chopping of the solid material suspended

in the liquid being pumped.

- Large, through passage, open multi-channel

impeller and double cutting system in suction inlet

- Cast iron construction

- Double mechanical seal with oil bath

- 65-200mm discharge

- 2.2-45kW output

- Auto coupling available.

SEPARATOR RANGE

The Separator Range is recommended for

solid-liquid seperation of slurry.

- Rotary, double-threaded screw, in an engineered

wedge wire screen

- Components are made in treated stainless steel

- Can reduce moisture content on sludges by up to

38%

- Heavy duty cast iron and stainless steel

construction

- Separator rotation: 33rpm

- 4 - 11kW output

- Screen sizes from 0.25mm to 1mm.

THE PTE SERIES

The PTE vertical chopper pumps feature a heavy

duty, robust construction designed for agricultural

applications.

- 4 - 95kW output

- 52m maximum head

- 150 l/sec maximum capacity.

LAYFLAT HOSE

T-T’s layflat hoses are the preferred solution

for the agricultural sector. The durability and

wear resistance provide the longest lasting

hoses for demanding use.

THE TBM/TBX MIXER RANGE

These submersible, horizontal mixers, fully

manufactured in cast iron and AISI 316 stainless

steel, are recommended for mixing and

homogenizing processes in sewage treatment

plants and applications in very corrosive liquids.

- Propellers with self-cleaning profile to ensure

durability and efficiency even in the most extreme

conditions

- TBX - 316 stainless steel construction, 0.75 - 3kW

output

- TBM - cast iron construction, 2.2 - 25kW output

- Maximum submergence depth: 20m

- Maximum solid content in liquid: 12%

- Maximum temperature of pumped liquid: 40°C.

T-T FARMWASH

PLUS MANY MORE... SEE TECHNICAL FOLDER FOR MORE INFORMATION.

A range of powerful washdown sets suitable for

general farm use and washing. A full kit

comprising of a pump mounted on a stainless steel

base complete with auto-stop/start, hose, fittings

and an adjustable nozzle.

- Suitable for agricultural washdown, general high

volume washing, parlour washing, vehicle

washing and abattoirs

- Heavy duty robust and compact design

- Dry run protection

- 25 metre high quality hose

- Custom built version available.


HBC BIOCELL

WHAT IS THE HBC BIOCELL?

The HBC is an innovation, providing comfortable and hygienic bedding from slurry. Slurry management on farms represents a costly outgoing along with the cost of

acquiring bedding. Separators ensure the separation of the solid and liquid fractions in manure this is followed by treatment of the solid fraction to produce bedding

material. The equipment utilises aerobic processes, capable of raising the internal temperature to between 60 and 70°C, these temperatures ensure that the bedding is

sanitized and therefore hygienic bedding is produced.

HOW DOES THE HBC BIOCELL WORK?

The HBC machine consists of a chamber for the stabilisation process, a mixing system, air injection fan, steam extraction fan, temperature sensors (for process control),

load cells (for process control) and an electronic control system. The machine takes the solid fraction of manure and through aerobic processes turns this into veterinary

approved bedding.

The manure is collected into a tank containing a mixer and chopper pump, the pump feeds a screw press separator, which produces a solid fractions for input into the

HBC machine. The screw press separator, separates the solid and liquid fractions, resulting in a percentage of dry matter of about 35%. The HBC machine dries and

hygienises the solid fraction present in cattle manure. A stabilisation process inside the machine hygienises the material and reduces bacteria. The process is aerobic,

achieved by mixing the material with simultaneous air insufflation. The output of the matter from the HBC machine has a percentage of dry matter around 40% which

can be directly used as bedding for cattle.

HOW DOES THE HBC BIOCELL WORK?

The HBC biocell is an economic machine, by using the solid waste for bedding as opposed to traditional bedding methods (Straw etc.) return on investment is achieved in

4 to 5 years. For example:

A dairy farm with 1000 cows spends approximately £50 per cow per year, this equates to £50,000 spent on straw per year.

The HBC Biocell has a one off cost of approximately £140,000* for the HBC equipment, it then has a running cost of £22,000. The difference between the traditional bedding

yearly costs is £50,000 minus £22,000 which equals £28,000. Therefore the initial set up cost of £140,000 divided by the difference in yearly costs between traditional

method and HBC method which is £28,000 equals a return on investment of 5 years.

A high quality bedding is produced from the HBC Biocell this is ensured by the electronic control system on

the machine. The bedding produced is veterinary approved ensuring healthy livestock and is proven to improve

milk production.

The HBC biocell provides an economic way to manage manure, the manure is already separated into liquid and

solid fractions and the amount of manure to handle is reduced because there is no traditional bedding material.

Further to this, less storage is needed as the hygienized solid is readily available to suit requirements,

therefore there is no need for an additional warehouse as with traditional bedding. In addition

to this the HBC is relatively small in its dimensions and is extremely compact, therefore

making is easy to manoeuvre and install.

SPEAK TO A MEMBER OF OUR TEAM FOR OUR DETAILS


OTHER PRODUCT RANGES AVAILABLE

CLEAN WATER PRODUCTS

As clean water is a vital component of daily life, here at T-T we invest our knowledge and

expertise into providing clean water solutions for a range of applications including water

supply, boosting, cooling circuits, irrigation, heating and ventilation, borehole, leisure and

more.

The Hi-Dro Boost is a comprehensive range of fixed and variable speed multiple clean

water pump booster sets, designed and manufactured to provide both the required flow and

water pressure for your application.

Manufactured using the latest pump technology, the Hi-Dro Boost range are assembled

using stainless steel suction and delivery manifolds, WRAS compliant components,

mounted onto a heavy duty engineered stainless steel base plate.

SERVICE BENEFITS

- REDUCED RUNNING COSTS INCLUDING ENERGY AND

MAINTENANCE

- GREATER LIFE EXPECTANCY FOR PUMPING EQUIPMENT

- REDUCED RISK OF BREAKDOWN WITH ITS RESULTANT

- BETTER PLANT UTILISATION AND RETURN ON CAPITAL

- IMPROVED ENVIRONMENTAL CONDITIONS

- IF YOU HAVE A SERVICE AGREEMENT YOU WILL RECEIVE

PREFERENTIAL TERMS FOR PARTS AND LABOUR, AND

PRIORITY RESPONSE FOR SERVICE ATTENDANCE ON-SITE

CREATE A T-T ONLINE ACCOUNT AND RECEIVE A PERSONALISED DASHBOARD, MAKING IT

EASY TO ACCESS ALL YOUR ACCOUNT INFORMATION!


TERMS AND CONDITIONS

TERMS AND CONDITIONS

This agreement is valid from the agreed commencement date for a 12

month period (or until such time as the agreement is terminated.

1. Subject to the terms and conditions of this Distribution Agreement,

Supplier appoints Distributor, and Distributor accepts such

appointment and agrees to act as Supplier’s exclusive distributor of

the Supplier Products within the geographical territory defined

2. Distributor agrees to exercise its best efforts to (a) promote the sale of

and obtain orders for the Supplier Products in the Territory; (b) abide

by Supplier’s policies and procedures with regard to the purchase,

sale and support of Supplier Products; and (c) conduct its business

in a manner that reflects favorably at all times on the Supplier

Products and the good name, goodwill and reputation of Supplier or

its affiliates. Distributor acknowledges and agrees that it has no rights

or claims of any type to the Supplier Products, or any aspect thereof,

except such rights as are created by this Distribution Agreement.

Distributor agrees that it shall not and is not authorized to promote,

resell, deliver, install, service or otherwise support the Supplier

Products outside of the Territory.

3. It is a requirement to undertake an annual training day held at T-T

head office

1.1 All distributors must agree to attend on the same day

1.2 The distributor must make their own way to T-T

4. A demo pump and spares must be purchased to support the

distributors area. In return the supplier will provide the distributor

with promotional materials and technical support.

I/we accept the above terms and conditions. Please sign below:

Distributor Sign: ______________________________________ Date: ________________

Supplier Sign: ________________________________________ Date: ________________


NOTES


WHAT SUPPORT CAN YOU GET?

TECHNICAL RESOURCES

We can provide comprehensive technical resources including

datasheets and manuals for all products you purchase from T-T.

You can access these resources in a number of ways:

1. Contact you sales representative

2. Visit www.ttpumps.com

3. Email marketing@ttpumps.com

TECHNICAL SUPPORT &

TRAINING

Your sales representative will

be on hand to answer all your

technical questions and provide

training for you and your

collegues.

MARKETING MATERIALS

We can provide you with marketing materials including

leaflets, adverts, web banners and images.

If you have any requests for marketing materials

email marketing@ttpumps.com. We will

endeavor to get back to you within 24 hours.

T-T PUMPS Ltd., Woore, Cheshire CW3 9RU

www.ttpumps.com e-mail: response@ttpumps.com

We reserve the right to amend specifications without prior notice. © T-T PUMPS Ltd. 2018 DATA 1794: 04/01/2018

More magazines by this user
Similar magazines