Views
10 months ago

RUT240_manual_v1_9

1. Field name Values

1. Field name Values Notes New/From current Generate new SMS settings or use current device Generate SMS configuration configuration 2. Interface Mobile/Wired Interface type used for WAN (Wide Area Network) connection 3. WAN Enable/Disable Include configuration for WAN (Wide Area Network) 4. LAN Enable/Disable Include configuration for LAN (Local Area Network) 6. Protocol Static/DHCP Network protocol used for network configuration parameters management 7. IP address “217.147.40.44” IP address that router will use to connect to the internet 8. IP netmask “255.255.255.0” That will be used to define how large the WAN (Wide Area Network) network is 11. IP gateway “217.147.40.44” The address where traffic destined for the internet is routed to 12. IP broadcast “217.147.40.255” A logical address at which all devices connected to a multiple-access communications network are enabled to receive datagrams. 108

13. Primary SIM card SIM1/SIM2 A SIM card that will be used as primary 14. Mobile connection Use pppd mode Use ndis mode An underlying agent that will be used for mobile data connection creation and management 15. APN “internet.mnc012.mcc345.gprs” (APN) is the name of a gateway between a GPRS or 3G mobile networks and another computer network, frequently the public Internet. 16. Dialing number “+37060000001” A phone number that will be used to establish a mobile PPP (Point-to-Point Protocol) connection 17. Authentication method CHAP/PAP/None Select an authentication method that will be used to authenticate new connections on your GSM carrier's network 18. User name “admin” User name used for authentication on your GSM carrier's network 19. Password “password” Password used for authentication on your GSM carrier's network 20. Service mode Auto 4G only 3G only 2G only You can add as many phone numbers as you need. Dropdown list with additional rows will show up if you click on “add” icon at the end of phone number row. 21. IP address “192.168.1.1” IP address that router will use on LAN (Local Area Network) network 22. IP netmask “255.255.255.0” A subnet mask that will be used to define how large the LAN (Local Area Network) network is 23. IP broadcast “192.168.1.255” A logical address at which all devices connected to a multiple-access communications network are enabled to receive datagrams 1. 2. Field name Values Notes Generated configuration Here you can review and modify configuration Message text field message message text to be sent Phone number 3. Authorization method No authorization By serial By router admin password “+37060000001” A phone number of router which will receive the configuration What kind of authorization to use for remote configuration 109

ESR9855G User Manual - EnGenius Technologies
D-Link DIR-635 User Manual
WLA-500AP WISP Client Router Mode - Download
d-link wireless n150 adsl2+4port ethernet router - simpleminders.com
Linksys E1000 User Guide - SWS a.s.
EnGenius ECB150 Manual (PDF) - 4Gon
FCC Notices - D-Link | Technical Support | Downloads
Table of Content D-Link DSL-2740U User Manual 1