Views
11 months ago

UNIMIG Cat 2017 low res

PROTECTIVE SAFETY WEAR

PROTECTIVE SAFETY WEAR Welding Apparel Leather Apron XA STEERSOtuff Leather Apron XcelArc Steersotuff leather apron is heat and flame resistant made from leather using durable and pliable split cowhide. All leather seams are double lock stitched with high strength Kevlar thread. Panels and stress points are reinforced with doubled leather and metal rivets that are insulated. The unique self balancing strap system features a quick release buckle and sliding length adjuster. Part-No XA-44-7142 Description XcelArc Leather Welding Apron 107cm Length STEERSOtuff Leather Sleeve Set XA STEERSOtuff Leather Sleeve Set XcelArc Steersotuff leather sleeve set is heat and flame resistant made from leather using durable and pliable split cowhide. All leather seams are double lock stitched with high strength Kevlar thread. Panels and stress points are reinforced with doubled ­ leather and metal rivets that are insulated. The unique self balancing strap system features a quick release buckle and sliding length adjuster. Snap lock rivets at the wrist provide quick and easy closer and release of the sleeve entry. Part-No XA-44-7023 Description XcelArc Leather Welding Sleeve Set STEERSOtuff Leather Chaps XA STEERSOtuff Leather Chaps XcelArc STEERSOtuff leather chaps are heat and flame resistant made from leather using durable and pliable side split cowhide. The chaps provide excellent lower body and leg protection from heat, abrasion and sparks. The chaps are secured easily with adjustable straps. Part-No XA-44-7440 Description XcelArc Leather Chaps 130

PROTECTIVE SAFETY WEAR Welding Apparel Leather Spats XA STEERSOtuff Leather Spats XcelArc leather spats are heat and flame resistant made from tough, durable and pliable split cowhide leather . The spats provide excellent protection of ankles and feet preventing sparks and hot material from entering the inside of footwear. The spats are easy to fit and are secured and held in place by Velcro strip pads. Part-No XA-44-7106 Description XcelArc Leather Spats STEERSOtuff Welders Cushion XA STEERSOtuff Leather Cushion Heavy duty construction made from 5-side Lava Brown heat and flame resistant leather which is made from durable and pliable side split cowhide 1-side Aluminised PFR Rayon to protect from welding spatter and sparks. Size: 500 x 500 x 80mm Part-No XA-44-7900 Description XcelArc Leather Welders Cushion Welders Flame Retardant Skull Rags XA Professional Series Welders Skull Rags Made from 100% preshrunk cotton these flame retardant skull rags are resistant to flame and welding spatter and will retain their flame retardant properties for up to 50 home washings. Athletic mesh lining for comfort, air cushioned insert for sweat absorbency, ties in back for one size fits all. Part-No XA-23-3601 XA-23-3602 XA-23-3604 XA-23-3606 XA-23-3607 XA-23-3613 Description XcelArc Skull Rag - Camouflage XcelArc Skull Rag - Wild XcelArc Skull Rag - USA XcelArc Skull Rag - Happy Hour XcelArc Skull Rag - Paradise XcelArc Skull Rag - Safety Orange Camouflage Wild Happy Hour USA Paradise Flame Retardant Welders Hood XA Professional Series Flame Retardant Hood Made from flame retardant cotton sateen that is tested to ensure conformity to ASTM D6413-99. This flame retardant welders hood is resistant to flame and welding spatter, and will retain it’s flame retardant properties for up to 50 home washes. Lightweight and comfortable fully enclosing the welders head, neck area for maximum protection. Part-No Description XA-23-6680 XcelArc Flame Retardant Blue Helmet Hood 131

PowerMaster SP Series Sales Brochure - Victor Technologies ...
What is Synergic Pulse MIG welding? - Victor Technologies - Europe
Plasma equipment solutions from EsAB - ESAB Welding & Cutting ...
Low Cost Torch Height Control Install and Setup Manual - CandCNC
Training Articles Journal - Centricut
Operating instructions - EWM Hightec Welding GmbH
Aristo® Mig 4004i Pulse Aristo® Feed 3004, U6/U8 Aristo ...
PT-31XL and PT-31XLPC Plasma Arc Cutting Torches
warning - ESAB Canada
Operating instructions - EWM Hightec Welding GmbH
4. TIG Welding and Plasma Arc Welding
Origo™ Mag C171/C201/C251
Product Catalogue - EWM Hightec Welding GmbH
Mechanized Plasmarc Cutting Torch - ESAB Welding & Cutting ...
4 - Oerlikon, the expert for industrial welding
PT-37 - ESAB Welding & Cutting Products
Origo™ Mag C171/C201/C251
PLASMA ARC CUTTING PACKAGES - ESAB