UNIMIG Cat 2017 low res

MACHINE OPTIONS
Accessories
UMJRTROLLEY2
Trolley for Small Inverter WeldersWelder
• Sturdy metal construction
• Solid rear rubber wheels
• Heavy duty castor wheels
• Shelf for spares, leads, etc
UTJRTROLLEY
Trolley for RAZOR 200ACDC / UNIMIG 200ACDC Welder
• Sturdy metal construction
• Solid rear rubber wheels
• Heavy duty castor wheels
• Drawer for spares, leads, etc
UTJRTROLLEY3
Water CoolerTrolley for 315ACDC Welder 5 Litre
• Accepts installation WC-30 water cooler
• Sturdy metal construction
• Solid rear rubber wheels
• Heavy duty castor wheels
• Includes Water Cooler
UMJRTROLLEY4
Trolley for RAZOR 250 / RAZOR 250 DIGITAL MST InverterWelder
• Sturdy metal construction
• Solid rear rubber wheels
• Heavy duty castor wheels
• Drawer for spares, leads, etc
PLASMA AIR FILTERS
Sub-Micronic Compressed Air Filtter
Code: 50500-12 / 50505-48­
Filtering Degree:
.01 pinch - 0.25 pm­
Maximum Pressure: 125 PSI - 8.5 bar­
Maximum Flow @ 80%: 2700 SCFH - 1250|/min­
Temperature Range: 1 5-1 40F / -1 0 +60C o ­
Size Pipe:
1/4 NPT­
Dimension:
132 x 200 mm
50500-12
Overview­
50505-48
‘AT 1000” is the perfect solution to the problems created by the contamination of the compressed air used in many plasma cutting ­
systems. It eliminates “sputter” caused by moisture and oil from compressed air lines. It extends the electrode and tip life, with ­
obvious benefits to the cut quality. Designed to remove areosol oil and moisture, the “AT 1000” is a real benefit, entrapping particles
as small as .01 microns inches, with the “AT 1000” torches Iast longer. Using a plasma cutter without the “AT 1000” fitted
will result in condensed moisture remaining in the torch and torch head. This moisture can cause a short-circuit, with subsequent
costs for the replacement of the torch head. The ”AT 1000’ can filter up to 1250 Iiters a minute without reduction in pressure. It’s
recommended to replace the filter cartridge every 5 to 7 days (max). It’s also very suitable for painters and use of pneumatic tools.
93 93