2 | Melters ATS Retrofit Kit External Flow Measuring and Process Control Device ReplacementParts and Kits ATS Control Box Part Number Description 1125299 Kit, control box, ATS 1125300 Kit, harness, power, 0.9 m (3 ft), ATS 1125931 Kit, harness, power, 6 m (20 ft), ATS 1125297 Kit, membrane panel, ATS 1125307 Kit, display, LCD, ATS 1125298 Kit, PCA, flow meter, ATS (flow control board) ATS Retrofit Manifold Part Number Description 1125294 Kit, flow meter assy, ATS (includes the complete flow meter assembly) 1125296 Kit, plate, bypass, flow meter, ATS (can be installed in place of the flow meter) 1125966 Kit, manifold, 12 pin, retrofit, ATS 1125967 Kit, manifold, 6 pin, retrofit, ATS 1125968 Kit, manifold, water-wash, retrofit, ATS 1125658 Kit, retainer, sensor, flow meter 1125199 Kit, sensor, inductive, 0.6 m (2 ft) cable 1125799 Kit, sensor, inductive, 1.8 m (6 ft) cable 1125612 Kit, insulation, manifold, remote, ATS To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733, or online at www.enordson.com. International orders, call 1-440-985-4797, fax 1-440-985-1096, or email email@example.com.
Melters | 3 Freedom Hot Melt Dispensing System Description The Freedom Hot Melt Packaging System integrates the tankless Freedom Series melter with an automatic fill unit, RediFlex hoses, MinBlue II SureBead applicators and an Optix touch-screen control panel. The Freedom hot melt adhesive system is an adhesive melting, transfer, and dispensing system that offers users: • Freedom from mounting limitations • Freedom from manual adhesive filling • Freedom from confusing controls and diagnostics • Freedom from excessive adhesive use • Freedom from downtime due to char and contamination The important characteristics of the Freedom system are briefly described here. For more detailed information, refer to the melter manual. Touchscreen Controls The system is controlled through a user-friendly color touchscreen control system, called Optix, that all users can effectively operate. The Optix control system includes: • a color-coded (green, red, or yellow) status indication that indicates system health • easy setup of inputs/outputs • text-based indications for system problems • a system inventory and component identification function that shows what components are connected and provides their part numbers for easy reordering Integrated Fill System The Freedom system includes an integrated fill system. The melter reservoir stores only 1.1 kg (2.5 lb) of molten adhesive. Solid adhesive stored in an adhesive bin is automatically transferred to the melter as needed. Easy to Service The melter’s internal components can be accessed entirely from the front, without removing the melter from its mount. Smart Melt Technology When the Smart Melt technology is enabled, the melter’s internal zones automatically switch off when the integrated fill system has not activated for a user-specified amount of time. The system continues to maintain ready status until a fill signal is generated. EcoBead Technology Systems that include the EcoBead technology can provide adhesives savings of up to 60% while still maintaining full adhesive bond integrity. The EcoBead technology is enabled by using the touchscreen to choose the desired adhesive savings and to select a preprogrammed adhesive pattern. To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733, or online at www.enordson.com. International orders, call 1-440-985-4797, fax 1-440-985-1096, or email firstname.lastname@example.org.