72 | Melters FoamMelt® 200 Processor Miscellaneous Part Number Description 1009090 Fuse, 3.15 A 161106 Filter screen, 0.006 mesh 221657 Valve, Reedex 247260 Kit, 2 hose/2 applicator board 247265 Kit, grid board, Vista 247266 Kit, contactor board 142522 Service kit, valve, density control/filter, standard (replacement kit for P/N 310120) 310159 Valve, pressure control 310362 Transducer assembly 320291 Control panel, gas, FM200 320293 Control panel, mot, FM200 341163 Drain valve, ASM 341171 Belt, drive, straight-tooth 1124463 Belt, drive, helical-offset-tooth 1124469 Service kit, drive, FM200, helical offset belts and sprockets 341348 Fuse, 3AG, time delay, 1.25 A 341360 Contactor, 30 A, 250V 341388 Motor controller 939491 Fuse, 25 A 326975 Service kit, test plugs, Vista/3000 O-Rings Part Number Description Quantity 941521 O-ring, Viton, 3.25 in. ID (pump OD) 1 940161 O-ring, Viton, 0.63 in. ID (pump outlet) 1 940111 O-ring, Viton, 0.301 in. ID (pump gas inlet) 1 940161 O-ring, Viton, 0.63 in. ID (pressure readout ports) 2 945026 O-ring, Viton, 1/4 tube (pressure readout fitting), check valve 2 945034 O-ring, Viton, 5/16 tube (manifold fitting Cross drill ports) 8 945025 O-ring, Viton, 5/8 tube (manifold hose ports) 1* 942111 O-ring, Viton, 0.81 in. ID (pressure control valve) 1* 940141 O-ring, Viton, 0.50 in. ID (pressure control valve), pump 2 941240 O-ring, Viton, 1.25 in. ID (density control/filter) 1 940281 O-ring, Viton, 1.375 x 1.500 x 0.063 in., manifold 1 940342 O-ring, Viton, 21/8 x 21/4 x 1/16 in., drive assembly 1 954036 Backup ring, 1/4 x 3/8 in., drain valve 1 940101 O-ring, Viton, 0.239 x 0.070 in., drain valve 1 *Needed during regular maintenance. To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733, or online at www.enordson.com. International orders, call 1-440-985-4797, fax 1-440-985-1096, or email email@example.com.
Applicators Applicators | 73 Description SolidBlue applicators and modules are the industry standard for general packaging applications. SolidBlue applicators and modules: • Deliver reliable, long-life operation • Reduce module replacement costs • Feature new EasyOn design for faster installation Blue Series Applicators SolidBlue Applicators SolidBlue applicators and modules are available in two designs. SolidBlue S applicators feature air-open/springclosed (AO/SC) actuation and SolidBlue A applicators feature air-open/air-closed (AO/AC) actuation. Both applicators provide up to twice the service life of Nordson Classic Blue Series applicators. Applicator modules are fully rebuildable and key applicator body components are easily accessible for easier, faster maintenance. All single- and multi-module applicators are built from the same applicator body platform for greater application flexibility and system compatibility. The Best Choicet configurator allows you to quickly and easily determine the right applicator body for your application, minimizing the need for specially engineered applicators and reducing delivery time. Unique EasyOn module mounting provides: • Guided, one-way fit (mated module and applicator body surfaces) • Easier, safer installation (especially on applicator bodies located deep within machines) • Backward compatibility (modules fit existing Nordson applicator bodies) • Simpler design Use the Best Choice configurator to configure a single-module or multi-module applicator with mounted solenoids for a specific application and to obtain a part number and ordering information. The Best Choice configurator also provides dimensions for a specified applicator. To obtain the Best Choice configurator, contact your Nordson representative. To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733, or online at www.enordson.com. International orders, call 1-440-985-4797, fax 1-440-985-1096, or email firstname.lastname@example.org.