Views
3 weeks ago

Katzbeck-Manual

A family-run firm from Austria with a workforce of 220 employees, KATZBECK has manufactured bespoke windows and doors made of wood and wood/aluminium for over 65 years. KATZBECK products stand for first-rate design, innovation, outstanding quality and green production processes. KATZBECK is your competent and capable partner in all stages of door and window production, from consulting and planning, to manufacture and installation. Open your senses and find inspiration for your home. Select from a broad range of models, colours and forms; create precisely the atmosphere in your ‘four walls’ that best suits your style. Visit our headquarters and production facility in Rudersdorf or one of our eight window studios in Austria.

Remounting and unhinging

Remounting and unhinging the tilting sash cross(es): Unhinging: 1. Open the small safety plate to unhinge when tilted (ill. 1). 2. Close sash, move handle to cleaning position (ill. 2, C) and open the sash. Remounting: 1. Move handle to cleaning position for remounting (ill. 2, C). 2. Open the small safety plate on the casing of the tilting cross (ill. 1) and remount the cross arm. 3. Move the handle to the tilt position (ill. 2, B) and close the small safety plate again (ill. 3). If arrester and cleaning cross shafts are installed and the sash should be moved to the cleaning position, the sash needs to be tilted until it arrests in the safety position. Then operate the ratchet brace of the arrester and cleaning cross shafts and slowly move the sash into the cleaning position manually. CAUTION: • The full weight of the sash has to be handled manually for this measure. • Never perform this work alone for heavy sashes! • Never add additional weight (e.g. bucket) to sashes in cleaning position. Safety Position operate the locking latch to tilt the sash into the cleaning position Cleaning Position 22 KATZBECK-MANUAL

11. Adjusting the contact pressure at the pin: Security locking pin 12. Adjusting the lifting lock: KATZBECK-MANUAL 23