A family-run firm from Austria with a workforce of 220 employees, KATZBECK has manufactured bespoke windows and doors made of wood and wood/aluminium for over 65 years. KATZBECK products stand for first-rate design, innovation, outstanding quality and green production processes. KATZBECK is your competent and capable partner in all stages of door and window production, from consulting and planning, to manufacture and installation. Open your senses and find inspiration for your home. Select from a broad range of models, colours and forms; create precisely the atmosphere in your ‘four walls’ that best suits your style. Visit our headquarters and production facility in Rudersdorf or one of our eight window studios in Austria.
13. Adjusting the door latch and/or the latch roll: 14. Remounting and Unhinging a Sash Only authorized licensed professionals are permitted to perform the remounting and unhinging, as well as adjusting the fittings! Cross shaft support VISIBLE FITTING: 1. Remove casing, if existing. 2. Pull cross shaft support pin down with suitable tool. IMPORTANT: the cross shaft support pin can only be pulled out when the sash is in a closed position! 3. Open sash 90° (secure against tilting at the control box!), swivel the hinge angle out of the cross shaft support and unhinge the sash and corner insert. Remounting takes place in reverse order. 24 KATZBECK-MANUAL
Correct position of the pin after hinging Cross shaft support GIGANT (Mammut) FITTINGS: 1. Remove safety bolt 2. Remove cross shaft support pin 3. Pull cross shaft support pin down and open sash 90° 4. Swivel the hinge angle out of the cross shaft support and unhinge the sash and corner insert. Remounting takes place in reverse order It is essential that the scissor stay hinge pin is installed! KATZBECK-MANUAL 25