Views
3 months ago

Katzbeck-Manual

A family-run firm from Austria with a workforce of 220 employees, KATZBECK has manufactured bespoke windows and doors made of wood and wood/aluminium for over 65 years. KATZBECK products stand for first-rate design, innovation, outstanding quality and green production processes. KATZBECK is your competent and capable partner in all stages of door and window production, from consulting and planning, to manufacture and installation. Open your senses and find inspiration for your home. Select from a broad range of models, colours and forms; create precisely the atmosphere in your ‘four walls’ that best suits your style. Visit our headquarters and production facility in Rudersdorf or one of our eight window studios in Austria.

HIDDEN FITTINGS: 1. Open

HIDDEN FITTINGS: 1. Open the sash 90°. 2. Trigger the mishandling device (1) (only on turn & tilt windows), turn the handle to the tilt position (2). 3. Open the scissor stay arm safety device/turn-only hinge arm safety device (3). 4. Lift the scissor stay and/or turn-only hinge arm until it is completely free (4), then move it into the frame (5). 5. Close the sash. 6. Tilt the sash slightly and lift it up and out (6). For hinging, carry out the above steps in reverse order. 26 KATZBECK-MANUAL

15. Load Transfer of Hidden Fittings: Subsequent Mounting: Preparation: 1. Press seal fully into the height adjustment screw of corner bearing hinge. 2. The height adjustment screw must be in a “neutral position“ (factory position) Drilling with the help of a gauge: 1. Insert the drill gauge into the mortise in the correct position (arrow pointing down) 2. Push gauge downward until it touches the corner bearing hinge. 3. Pre-drill with a 3 mm or 7 mm drill bit. KATZBECK-MANUAL 27