Views
6 months ago

Graco Elektr. Pumpen

Compressor Lubrication

Compressor Lubrication Accessories Manzel ® Lube-Line Alert 563030 Features and Benefits • Indicates Flow or No-Flow at any point in the system ahead of the Lube-Line Alert inlet. Not affected by discharge pressure. • Operates under continuous or intermittent low-flow rates • Universal use–operates in any air free force feed lubrication system–any make lubricator • Sensitive to a wide range of flow from .006 cubic inches to 190 cubic inches per minute • Many type lubricants and viscosities–mineral or synthetic • Time delay adjustment to compensate for viscosity and/or flow rate. Quick and easy to adjust. • Explosion-proof–UL and CSA Listed for Class I Groups C and D and Class II Groups E, F and G. Division 1 and 2 when installed as per NEC 501. • For connection to any electrical warning system–lights, sound devices, machinery shut-off relays, telephones, etc. • A low-level and shaft rotation Technical Specifications UL and CSA Electrical Ratings .........................................................Single pole, Throw magnetically operated switch, 115 VAC, 60Hz, 10 watt, 28 VDC, 0.5 amp Resistive, 28 VDC, 0.5 amp Inductive Max Switch Rating ....................................................................................................350 VAC/VDC, 50 watt, 2 amp Max Operating Pressure .........................................................................................................................10,000 psi Min. Pressure Drop Access Alert ..................................................................................................................150 psi Flow Rate .....................................................................................0.006 cu.in. to 190 cu.in. per minute @ 100 SUS 0.006 cu.in. to 75 cu.in. per minute @ 2000 SUS Fluid Viscosity .............................................................................................................................. 100 to 9000 SUS Weight........................................................................................................................................................0.6 lbs Compressor Lubrication Accessories Ordering Information Lube-Line Alert 563030 N.C. Configuration w/Check Valves for 1/4 inch O.D. Tube, Standard Spring (installed), w/ Light Spring (loose)* 563033 N.O. Configuration w/Check Valves for 1/4 inch O.D. Tube, Standard Spring (installed), w/ Light Spring (loose)* 563032 N.O. Configuration w/Check Valves and Fittings for 1/8 inch NPTF Connections, Standard Spring (installed) Inlet Check Valves 563042 w/ 1/4 inch O.D. Tube Inlet (supplied w/1 and 2) 563041 w/ 7/16-20 Straight Female Thread Outlet (supplied w/3) Outlet Check Valves 563044 w/ 1/4 inch O.D. Tube Inlet (supplied w/1 and 2) 563043 w/ 7/16-20 Straight Female Thread Outlet (supplied w/3) Fittings 556624 (w/Check Valves 4 and 5), 7/16-20 Straight Male Thread x 1/8 inch NPTF (2 supplied w/3) Springs 556944 Standard Springs (installed at factory in 1 and 3) 556939 Light Spring for Low Flow Applicator (supplied loose w/1, installed in 2)* Repair Parts 556812 Switch Assembly 563031 Plunger and Bushing Assembly *When using the Light Spring 556939 (458-005-220), fluid viscosity should not exceed 350 SUS 132 www.graco.com

Compressor Lubrication Accessories Pneumatic/Electric Lube Sentry Valve Features and Benefits The Lube Sentry Valve provides automatic warning and shutdown of compressors, pumps and engines when oil is not flowing properly to primary dividers in series type lube systems. • Absence of check valves to avoid trapping contamination from included solids in the lubricant • Bolted-together components simplifying maintenance. The microswitch assembly on the pneumatic valve can be removed without disturbing existing lines or shutting down the equipment being lubricated. Technical Specifications Material..........................................................................................................................................................Steel Max Pressure ........................................................................................................................... 6,000 psi (414 bar) Flow Rate (per day) .................................................................................................. 4-400 pints (1.89-189.2 liters) Pressure Drop................................................................................................................................ 250 psi (17 bar) Seals............................................................................................................................................. Fluoroelastomer Lubricant..................................................................................................................................Oil (450-2000 SUS) Net Weight...................................................................................................................................0.5 lb (2.265 kg) Operating Temperature ........................................................................................ -20º F to 180º F (-29º C to 82º C) Air Pressure (Max Pneumatic Valve) .................................................................................................. 125 psi (9 bar) Electrical Rating ................................................................................................................ 5 amps @ 125/250 VAC A,B or C @ 28 VDC, A- Inductive - 3 amp, B- Resistive - 5 amp, C- Max Inrush - 15 amp 563506 Ordering Information 563506 Pneumatic Lube Sentry, Complete 563503 Pneumatic Valve 563502 Actuator 563505 Electric Lube Sentry, Complete 563504 Switch Assembly Compressor Lubrication Accessories www.graco.com 133