Views
6 months ago

Graco Elektr. Pumpen

General Accessories

General Accessories Pressure Switches Features and Benefits • Easy to visually adjust line pressure and reset pressure to ensure your lube system has vented properly • LED lights visually display pressure switch functions • Modern 4-pin M12 micro-connector easily connects to the G3 and other controllers • Turns off your pump or controller and activates venting once the lube system reaches the desired pressure level • 1⁄4 NPT thread allows quick connection to injector systems 24K414 IP67 rated – Durable design allows it to operate in harsh environments Ordering Information Pressure Switches Set pressure range 290-580 psi (20-40 bar), reset pressure range 175-5,685 psi (12-392 bar), 24K414 M12 connector (female), 9.6-32 VDC, 1/4 inch (7.6 cm) NPT thread (male) 88General Accessories Features and Benefits • Moisture resistant and factory set to ensure accuracy for long life and reliability • Sends an alarm signal to alert either a high- or low-pressure condition • Available for hydraulic pressures from 10 to 4,700 psi Ordering Information Pressure Switches 557830 1,500 psi (103 bar), 10-150 psi (.7-10 bar) adjustable range (factory set @ 50 psi / 10 bar ), moisture-resistant 557828 4,700 psi (324 bar), 400-4,700 psi (28-324 bar) adjustable range (factory set @ 750 psi / 52 bar), moisture-resistant 557829 4,700 psi (324 bar), 400-4,700 psi (28-324 bar) adjustable range (factory set @ 1,150 psi / 79 bar), moisture-resistant Features and Benefits • High-low, adjustable pressure switches Ordering Information Pressure Switches 115124 Single post pressure switch 558947 Dual post control pressure switch IP65 rated for harsh environments. Fluoroelastomer seals are suitable for use in high temperature 24N181 environments and synthetic lubricants. Large orifice reduces grease solidification. Din connector. Adjustable from 580-5,800 psi (40-400 bar) 557829 115124 24N181 www.graco.com

General Accessories Broken Line Indicators Features and Benefits • Monitors lube line integrity to ensure lubricant is delivered to critical bearings • Provides a visual or electronic indication • Works with terminating oil or grease systems as well as recirculating systems Technical Specifications BLI500 BLI1000 BLI1500 Simulator Pressure 60 psi (4.1 bar) 100 psi (6.9 bar) 150 psi (10.3 bar) 563078 Maximum Pump Pressure 1,000 psi (69.0 bar) 1,500 psi (103.4 bar) 2,500 psi (172.4 bar) The only device that provides visual indication that bearing lines are intact Ordering Information Broken Line Indicators 563068 500 psi (34.5 bar) indicator 563069 1,000 psi (68.9 bar) indicator 563070 1,500 psi (103.4 bar) indicator 563075 60 psi (4.1 bar) simulator 563076 100 psi (6.9 bar) simulator 563077 150 psi (10.3 bar) simulator 563078 Broken line indicator kit - 563068, 563075 563079 Broken line indicator kit - 563069, 563076 563080 Broken line indicator kit - 563070, 563077 General Accessories www.graco.com 89