catalog-2017

Recommendations

Info

T220 / GL220 SERIES FINISHES AND FUNCTIONS FINISHES AVAILABLE BHMA SYMBOL US CODE DESCRIPTION 605 US3 Polished Brass 606 US4 Satin Brass 609 US5 Antique Brass 612 US10 Satin Bronze 613 US10BE Dark Oxidized Satin Bronze, Equivalent 619 US15 Satin Nickel 625 US26 Polished Chrome 626 US26D Satin Chrome DOOR PREPARATION T220 ICT220 SCICT220 ANSI E0153 Single Cylinder Deadbolt Dead locking latch bolt retracted by key from outside or by thumb turn on inside. GL330 ICGL330 ANSI E0143 Double Cylinder Gate Latch Dead locking latch bolt retracted by key from either side. Otherwise, always locked. T330 ICT330 SCICT330 ANSI E0143 Double Cylinder Deadbolt Dead locking deadbolt retracted by key backset. GL330234 ICGL330234 ANSI E0142 Double Cylinder Gate Latch Dead locking latch bolt retracted by key from either side. Otherwise, always locked. (2 ¾” backset) ID58 ID60 One Sided Deadbolt Deadbolt thrown or retracted by turn unit only. No outside trim. Bore halfway through door for installation visible from one side of door only. One Sided Deadbolt Deadbolt thrown or retracted by turn unit only. Blank plate is on external trim to be GL58 GL60 One Sided Latch Bolt Dead latch retracted by thumb turn, no outside trim. Visible from one side of door only. Otherwise always locked. One Sided Latch Bolt Dead latch retracted by thumb turn unit. Blank plate on external trim to be used on Otherwise, always locked. GL220 ICGL220 ANSI E0153 Single Cylinder Gate Latch Dead locking latch bolt retracted by key from outside or by thumb turn on inside. GL58234 One Sided Latch Bolt Dead latch retracted by thumb turn, no outside trim. Visible from one side of door only. Otherwise always locked. GL220234 ICGL220234 ANSI E0142 Single Cylinder Gate Latch Dead locking latch bolt retracted by key from outside or by thumb turn on inside. Otherwise always locked (2 ¾” backset) GL60234 One Sided Latch Bolt Dead latch retracted by turn unit. Blank plate on external trim to be used on bore always locked. ADDITIONAL PARTS For single cylinder deadbolt For double cylinder deadbolt OTHER FUNCTIONS NOT LISTED ARE AVAILABLE UPON REQUEST HOLD BACK FEATURE ON DEADBOLT WITH GATE LATCH NOT AVAILABLE 68
LSD SERIES ANSI A156.2 GRADE 3 STANDARD DUTY DEADBOLTS LSD STANDARD DUTY DEADBOLTS FOR LIGHT COMMERCIAL AND RESIDENTIAL APPLICATIONS Conforms with ANSI A156.2 Series 4000, Grade 3 LSD88 DOUBLE CYLINDER LSD01 SINGLE CYLINDER SPECIFICATIONS TRIM BACKSET DEADBOLT FACEPLATE DOOR RANGES BORE DIAMETER KEYWAYS STRIKE FINISHES 69
Page 3:
September 2017 TO OUR VALUED CUSTOM
Page 6 and 7:
HINGES / NRP HINGES • NEW FINISHE
Page 8 and 9:
BUILDERS HARDWARE • MOVED Auto Fl
Page 10 and 11:
To Whom It may Concern,
Page 12 and 13:
Cal-Royal Products, Inc. 2. Section
Page 14 and 15:
Cal-Royal Products, Inc. is now Flo
Page 16 and 17:
TERMS AND CONDITIONS FOR CAL-ROYAL
Page 18 and 19:
Product Warranty EXIT DEVICE TRIMS
Page 20 and 21:
FINISH MAINTENANCE AND CARE CAL-ROY
Page 22 and 23:
XIV
Page 24 and 25:
CAL-ROYAL IS GOING GREEN! To: Cal-R
Page 26 and 27:
RMA#__________ MUST BE ON ALL PACKA
Page 28 and 29:
DOOR CLOSERS DOOR CLOSERS
Page 30 and 31:
TABLE OF CONTENTS I. CAL-ROYAL DOOR
Page 32 and 33:
REFERENCE & APPLICATION APPLICATION
Page 34 and 35:
MOUNTING INFORMATION 900 SERIES : R
Page 36 and 37:
INSTALLATION 900 SERIES : OPTIONAL
Page 38 and 39:
CR441 SERIES ANSI 156.4 Grade 1, Fu
Page 40 and 41:
MOUNTING INFORMATION CR441 SERIES :
Page 42 and 43:
CR441 SERIES ACCESSORIES CONCR441 -
Page 44 and 45:
CR441 SERIES ACCESSORIES 3049HOSPRI
Page 46 and 47:
CR801 / CR801S SERIES ANSI 156.4 Gr
Page 48 and 49:
MOUNTING INFORMATION CR801 / 801S S
Page 50 and 51:
CR801 / 801S ACCESSORIES 900HOSPRIN
Page 52 and 53:
Page 54 and 55:
300 SERIES ACCESSORIES OPTIONAL INS
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
MOUNTING INFORMATION 700 SERIES: RE
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
400 SERIES : ACCESSORIES OPTIONAL I
Page 69 and 70:
locksets LOCKSETS
Page 71 and 72:
TABLE OF CONTENTS I. GRADE 1 II. GR
Page 74 and 75:
1 ¼” 2 ¾” Heavy gauge zinc
Page 76 and 77:
NM SERIES SECTIONAL TRIMS & FINISHE
Page 78 and 79:
Latch bolt retracted by knob or lev
Page 80 and 81:
HEAVY DUTY ANSI 156.36 GRADE 1 SMAL
Page 82:
NM SERIES Available on NM8080 and
Page 85 and 86:
Meets ANSI / BHMA A158.13 Series 10
Page 87 and 88:
SC SERIES Kits and Accessories Op
Page 89 and 90: SC SERIES Grade 1 Heavy Duty Hospit
Page 91 and 92: HEAVY DUTY ANSI 156.5 GRADE 1 SMALL
Page 93 and 94: HL - HOSPITAL LATCH LG - ANTI-LIGAT
Page 95 and 96: HL - HOSPITAL LATCH LG - ANTI-LIGAT
Page 97 and 98: GENESYS CLUTCH MECHANISM FIXED THRU
Page 99 and 100: GENESYS CLUTCH MECHANISM FIXED THRU
Page 101 and 102: CALYPSO CLUTCH MECHANISM FIXED THRU
Page 103 and 104: OMEGA QUALITY DESIGNED AND ENGINEER
Page 105 and 106: CRB800 SERIES GRADE 1 HEAVY DUTY DE
Page 107 and 108: CRCODE200 SERIES GRADE 2 MECHANICAL
Page 109 and 110: PIONEER SL SERIES (NON-CLUTCH MECHA
Page 111 and 112: COMMANDER CLUTCH MECHANISM INTERCHA
Page 113 and 114: EXPLORER XP SERIES (NON CLUTCH MECH
Page 115 and 116: CHALLENGER NON CLUTCH MECHANISM CYL
Page 117 and 118: TUSCANY CLUTCH MECHANISM OPTIONAL T
Page 119 and 120: BARRINGTON QUALITY DESIGNED AND ENG
Page 121 and 122: HIL SERIES INTERCONNECTED LOCKS 4
Page 123 and 124: JHIL SERIES INTERCONNECTED LOCKS OP
Page 125 and 126: JHIL SERIES INTERCONNECTED ENTRANCE
Page 127 and 128: T300 SERIES ANSI A156.5 GRADE 2 HEA
Page 129 and 130: T400 MAXIMUM SECURITY HEAVY DUTY DE
Page 131 and 132: CB160 / GL160 SERIES ANSI A156.5 GR
Page 133 and 134: SL / T220 COMBO ANSI GRADE 2 LEVERS
Page 135 and 136: COLUMBUS QUALITY DESIGNED AND ENGIN
Page 137 and 138: EPIC FOR LIGHT COMMERCIAL AND RESID
Page 139: T220 STANDARD DUTY DEADBOLTS GL220
Page 143 and 144: LEGACY SERIES LEVERSETS WITH PUSH B
Page 145 and 146: CONTEMPORARY SERIES LEVERSETS & DEA
Page 147 and 148: CHELSIE SERIES LEVERSETS ADA
Page 149 and 150: CHELSIE SERIES DEADBOLTS ADA ED-50
Page 151 and 152: VANGUARD SERIES LEVERSETS & DEADBOL
Page 153: ASHLEY SERIES TUBULAR LOCKSETS / LE
Page 156 and 157: TABLE OF CONTENTS ITALIA SERIES D
Page 158 and 159: LEVER DESIGNS - HANDED - HOLLOW - S
Page 160 and 161: TUBULAR LATCH SET APPLICATION For r
Page 162 and 163: NM SERIES MORTISE LOCK MODEL ANSI A
Page 164 and 165: DEADBOLTS RND-500 (round rose) SQR-
Page 166 and 167: EXPLODED DIAGRAM ESCUTCHEON WITH TU
Page 168 and 169: CARE AND MAINTENANCE MAINTENANCE Ca
Page 170 and 171: CYLINDERS AND KEYING REPLACEMENT CY
Page 172 and 173: Large Format 6 Pin Interchangeable
Page 174 and 175: CYLINDERS AND KEYING HIGH SECURITY
Page 176 and 177: SMALL FORMAT INTERCHANGEABLE CORE (
Page 178 and 179: KEY BLANKS AND CONTROL KEYS ITEM CO
Page 180 and 181: CYLINDERS AND KEYING COMBI KEY SYST
Page 183 and 184: hinges hinges
Page 186 and 187: TABLE OF CONTENTS I. BASIC INFORMAT
Page 188 and 189: ARCHITECTURAL HINGES BASIC INFORMAT
Page 190 and 191:
ARCHITECTURAL HINGES BASIC INFORMAT
Page 192 and 193:
ARCHITECTURAL HINGES ITEM # SIZE
Page 194 and 195:
ARCHITECTURAL HINGES SPRING HINGES
Page 196 and 197:
ARCHITECTURAL HINGES RESIDENTIAL W
Page 198:
ARCHITECTURAL HINGES TYPE CAL-ROYAL
Page 201 and 202:
FULL MORTISE TEMPLATE HINGES Ball B
Page 203:
SPRING HINGE Full Mortise . Templat
Page 206 and 207:
CONTINUOUS HINGES Dimensioning Door
Page 208 and 209:
CONTINUOUS HINGES Concealed / Morti
Page 210 and 211:
CONTINUOUS HINGES Half Surface •
Page 213 and 214:
exit devices exit devices
Page 215:
TABLE OF CONTENTS I. 7700 SERIES RI
Page 218 and 219:
7700 & F7700 Series GRADE 1 Rim Typ
Page 220 and 221:
LBR7760V & LBRF7760V Series GRADE 1
Page 222 and 223:
7700 Series Delayed Egress Models G
Page 224 and 225:
Trim Selection CLUTCH CYLINDRICAL L
Page 226 and 227:
Trim Selection HEAVY DUTY STAINLESS
Page 228 and 229:
distant controller, thus allowing a
Page 230 and 231:
MECHANICAL CRCODE101 Features • H
Page 232 and 233:
MCVR7700 & FMCVR7700 Series Optiona
Page 234 and 235:
MCVR7700, FMCVR7700, WCVR7700 & FWC
Page 236 and 237:
MR7700 & FMR7700 Series GRADE 1 Mor
Page 238 and 239:
GLSCVR7700 & FGLSCVR7700 Series GRA
Page 240 and 241:
Trim Selection PULL DESIGN - FOR GL
Page 242 and 243:
Fire Exit Hardware Selector SINGLE
Page 244 and 245:
Comparison Chart RIM EXIT DEVICE CO
Page 246 and 247:
9800 & F9800 Series A9800 & AF9800
Page 248 and 249:
LBR9860V & LBRF9860V Series ALBR986
Page 250 and 251:
Trim Selection CLUTCH CYLINDRICAL L
Page 252 and 253:
Trim Selection RIGID LEVER ESCUTCHE
Page 254 and 255:
GRADE 1 Rim and Vertical Rod Type E
Page 256 and 257:
MECHANICAL CRCODE101 Features • H
Page 258 and 259:
MCVR9800 & FMCVR9800 Series Optiona
Page 260 and 261:
MCVR9800, FMCVR9800, WCVR9800 & FWC
Page 262 and 263:
MR9800 & FMR9800 Series GRADE 1 Mor
Page 264 and 265:
GLSCVR9800 & FGLSCVR9800 Series GRA
Page 266 and 267:
Trim Selection PULL DESIGN - FOR GL
Page 268 and 269:
Accessories with
Page 270 and 271:
9800 Series ANSI A156.3 Grade 1 Se
Page 272 and 273:
( ANSI A156.3, Grade 1 Features &
Page 274 and 275:
2260V & F2260V Series A2260V & F226
Page 276 and 277:
Alarm Exit Hardware Features •
Page 278 and 279:
Trim Selection RIGID LEVER ESCUTCHE
Page 280 and 281:
MECHANICAL CRCODE204 Features • B
Page 282 and 283:
driven electric latch retracting ex
Page 284 and 285:
Strike & Accessories 401 406 412
Page 286 and 287:
ANSI A156.3 Grade 1 Selector Chart
Page 288 and 289:
5000 & F5000 Rim Type Panic And Fir
Page 290 and 291:
T5000 & TF5000 Rim Type Panic And F
Page 292 and 293:
T5000V & TF5000V Series MADE IN TAI
Page 294 and 295:
Non-handed Other Lever Trim Des
Page 296 and 297:
Fire Exit Hardware Selector SINGLE
Page 298 and 299:
3/4” Latch Bolt Cross Bar Doggi
Page 300 and 301:
LCKUL424 ICLCKUL424 ICSCLCK424 UL42
Page 302 and 303:
thresholds thresholds
Page 305 and 306:
THRESHOLDS SADDLE THRESHOLDS CR2704
Page 307 and 308:
lites & louvers lites & louvers
Page 309:
TABLE OF CONTENTS I. GLASS TEMP, Te
Page 312 and 313:
GLASS Tempered, Pyran and Wire Shie
Page 314 and 315:
LOUVERS 60-90 Minute Fire-Rated Fus
Page 316:
uilders hardware builders hardware
Page 319 and 320:
TABLE OF CONTENTS XIII. DOOR STOPS
Page 321 and 322:
ILLUSTRATION ITEM SIZE ITEM # FINIS
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
AUTO FLUSH BOLTS AUTOFLM1 AUXAUTOFL
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
CR550 SERIES • • • •
Page 353 and 354:
Brailled for the Blind ITEM SIZE
Page 355 and 356:
Max Weight for Wood and Glass Doors
Page 357 and 358:
electronic & electrified electronic
Page 359 and 360:
GRADE 1 GRADE 2 DEADBOLTS POWER TRA
Page 361 and 362:
CR3000 DIGITAL KEYPAD DOOR LOCK HEA
Page 363 and 364:
CR6000 DIGITAL TOUCH SCREEN DOOR LO
Page 365 and 366:
PL7100 HEAVY DUTY GRADE 1 COMMERCIA
Page 367 and 368:
APPLE AND ANDROID COMPATIBLE BLE (B
Page 369 and 370:
LOCKSETS CR9000 COMMERCIAL, GRADE 2
Page 371 and 372:
LOCKSETS DB5000 GRADE 2 ELECTRONIC
Page 373 and 374:
DB9000 GRADE 2 ELECTRONIC TOUCHSCRE
Page 375 and 376:
• BUILT-IN Z-WAVE TECHNOLOGY TO C
Page 377 and 378:
LOCKSETS NM / SC SERIES FEATURES:
Page 379 and 380:
EXIT DEVICES DE7700 SERIES DELAYED
Page 381 and 382:
EXIT DEVICES 7700, 9800, 2200 SERIE
Page 383 and 384:
EXIT DEVICES POWER SUPPLIES FOR ELE
Page 385 and 386:
EXIT DEVICES RX and LX SIGNAL SWITC
Page 387 and 388:
ELECTRIFIED HARDWARE CRPT SERIES CO
Page 389:
DOOR CLOSERS CR441EHO CR441 SERIES
show all

catalog-2017

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?