Views
4 months ago

catalog-2017

TUBULAR LATCH SET

TUBULAR LATCH SET APPLICATION For residential and commercial interior doors with privacy, passage and dummy function MATERIAL Stainless Steel Levers, Knobs and Rose SPECIFICATIONS • • • • Handing: Most lever designs are non-handed, Handed designs are marked accordingly. Specify handing upon ordering • Latch Faceplate: 1” x 2 ¼” (25 x 57) • Emergency Pin: Available as standard for privacy function • Strike: FLS Full Lip Strike 1” x 2 ¼”, ¼” round corner (standard) TS ASA478 US32D FUNCTION: NON-KEYED Passage Inside and Outside levers always unlocked Privacy Privacy pin from inside, locks the lever. Turning inside lever releases pin or by emergency release pin Dummy Left or right lever are always inactive TUBULAR ENTRY SET APPLICATION For residential and commercial exterior and interior doors with entrance, privacy, passage and dummy function MATERIAL Stainless Steel Levers, Knobs and Escutcheons SPECIFICATIONS • Door thickness: 1 9 16 ” (40) - 2 (50) • ” (60) standard 2 ¾” (70) optional • Handing: Field reversible for passage and privacy function • Latch Faceplate: 1” x 2 ¼” (25 x 57) • Strike: FLS Full Lip Strike 1” x 2 ¼”, ¼” round corner (standard) TS ASA478 US32D Entrance Function • Cylinder and Keys: Schlage C Keyway Cylinder 5-pin with 2 keys Keying service available • Deadbolt: Latch Bolt: Grade 1, 4-way Drive-In, Brass bolt Deadbolt Strike: ” x 2 ¾” (29 x 70) square corner standard Privacy Function • Emergency Pin: Available as standard for privacy function Grade 2 Latch Upgrade • Available for Entrance, Privacy and Passage functions of lever / knob FUNCTION: KEYED AND NON-KEYED Entrance Key outside and thumbturn inside locks or unlocks cylinder. Inside and outside levers always unlocked Passage Inside and Outside levers always unlocked Privacy Privacy pin from inside, locks the lever. Turning inside lever releases pin or by emergency release pin outside. when ordering. Dummy Left or right lever are always inactive 88

ROSE AND ESCUTCHEON DESIGN GIRO ROSE Material: Stainless Steel SCUDO ESCUTCHEON Material: Stainless Steel 13 / 16” (20) 2 ½” (64) 2 ½” (65) 11 ¾ ” (298) 11 ¾” (298) UNITS: in (mm) QUADRO ROSE Material: Stainless Steel 1 11 /16” (43) 2 2 /16 (55) 2 ½” (64) 13 / 16” (20) Thumbturn 1 11 /16”(43) UNITS: in (mm) UNITS: in (mm) DOOR PREPARATION “ 1” (25) (60 or 70) 1” (25) (60 or 70) 2 ¼ (57) 1 (25) 5 1 / 2 (140) 2 ¼ (57) 2 ¼ (57) (54) 1” dia (25) UNITS: in (mm) 1 dia (25) (54) UNITS: in (mm) ROSE ESCUTCHEON 89

  • Page 3:

    September 2017 TO OUR VALUED CUSTOM

  • Page 6 and 7:

    HINGES / NRP HINGES • NEW FINISHE

  • Page 8 and 9:

    BUILDERS HARDWARE • MOVED Auto Fl

  • Page 10 and 11:

    To Whom It may Concern,

  • Page 12 and 13:

    Cal-Royal Products, Inc. 2. Section

  • Page 14 and 15:

    Cal-Royal Products, Inc. is now Flo

  • Page 16 and 17:

    TERMS AND CONDITIONS FOR CAL-ROYAL

  • Page 18 and 19:

    Product Warranty EXIT DEVICE TRIMS

  • Page 20 and 21:

    FINISH MAINTENANCE AND CARE CAL-ROY

  • Page 22 and 23:

    XIV

  • Page 24 and 25:

    CAL-ROYAL IS GOING GREEN! To: Cal-R

  • Page 26 and 27:

    RMA#__________ MUST BE ON ALL PACKA

  • Page 28 and 29:

    DOOR CLOSERS DOOR CLOSERS

  • Page 30 and 31:

    TABLE OF CONTENTS I. CAL-ROYAL DOOR

  • Page 32 and 33:

    REFERENCE & APPLICATION APPLICATION

  • Page 34 and 35:

    MOUNTING INFORMATION 900 SERIES : R

  • Page 36 and 37:

    INSTALLATION 900 SERIES : OPTIONAL

  • Page 38 and 39:

    CR441 SERIES ANSI 156.4 Grade 1, Fu

  • Page 40 and 41:

    MOUNTING INFORMATION CR441 SERIES :

  • Page 42 and 43:

    CR441 SERIES ACCESSORIES CONCR441 -

  • Page 44 and 45:

    CR441 SERIES ACCESSORIES 3049HOSPRI

  • Page 46 and 47:

    CR801 / CR801S SERIES ANSI 156.4 Gr

  • Page 48 and 49:

    MOUNTING INFORMATION CR801 / 801S S

  • Page 50 and 51:

    CR801 / 801S ACCESSORIES 900HOSPRIN

  • Page 52 and 53:

    MOUNTING INFORMATION 300 SERIES : R

  • Page 54 and 55:

    300 SERIES ACCESSORIES OPTIONAL INS

  • Page 56 and 57:

    MOUNTING INFORMATION 500 SERIES : R

  • Page 58 and 59:

    500 SERIES ACCESSORIES OPTIONAL INS

  • Page 60 and 61:

    MOUNTING INFORMATION 700 SERIES: RE

  • Page 62 and 63:

    700 SERIES ACCESSORIES OPTIONAL INS

  • Page 64 and 65:

    MOUNTING INFORMATION 400 SERIES : R

  • Page 66 and 67:

    400 SERIES : ACCESSORIES OPTIONAL I

  • Page 69 and 70:

    locksets LOCKSETS

  • Page 71 and 72:

    TABLE OF CONTENTS I. GRADE 1 II. GR

  • Page 74 and 75:

    1 ¼” 2 ¾” Heavy gauge zinc

  • Page 76 and 77:

    NM SERIES SECTIONAL TRIMS & FINISHE

  • Page 78 and 79:

    Latch bolt retracted by knob or lev

  • Page 80 and 81:

    HEAVY DUTY ANSI 156.36 GRADE 1 SMAL

  • Page 82:

    NM SERIES Available on NM8080 and

  • Page 85 and 86:

    Meets ANSI / BHMA A158.13 Series 10

  • Page 87 and 88:

    SC SERIES Kits and Accessories Op

  • Page 89 and 90:

    SC SERIES Grade 1 Heavy Duty Hospit

  • Page 91 and 92:

    HEAVY DUTY ANSI 156.5 GRADE 1 SMALL

  • Page 93 and 94:

    HL - HOSPITAL LATCH LG - ANTI-LIGAT

  • Page 95 and 96:

    HL - HOSPITAL LATCH LG - ANTI-LIGAT

  • Page 97 and 98:

    GENESYS CLUTCH MECHANISM FIXED THRU

  • Page 99 and 100:

    GENESYS CLUTCH MECHANISM FIXED THRU

  • Page 101 and 102:

    CALYPSO CLUTCH MECHANISM FIXED THRU

  • Page 103 and 104:

    OMEGA QUALITY DESIGNED AND ENGINEER

  • Page 105 and 106:

    CRB800 SERIES GRADE 1 HEAVY DUTY DE

  • Page 107 and 108:

    CRCODE200 SERIES GRADE 2 MECHANICAL

  • Page 109 and 110: PIONEER SL SERIES (NON-CLUTCH MECHA
  • Page 111 and 112: COMMANDER CLUTCH MECHANISM INTERCHA
  • Page 113 and 114: EXPLORER XP SERIES (NON CLUTCH MECH
  • Page 115 and 116: CHALLENGER NON CLUTCH MECHANISM CYL
  • Page 117 and 118: TUSCANY CLUTCH MECHANISM OPTIONAL T
  • Page 119 and 120: BARRINGTON QUALITY DESIGNED AND ENG
  • Page 121 and 122: HIL SERIES INTERCONNECTED LOCKS 4
  • Page 123 and 124: JHIL SERIES INTERCONNECTED LOCKS OP
  • Page 125 and 126: JHIL SERIES INTERCONNECTED ENTRANCE
  • Page 127 and 128: T300 SERIES ANSI A156.5 GRADE 2 HEA
  • Page 129 and 130: T400 MAXIMUM SECURITY HEAVY DUTY DE
  • Page 131 and 132: CB160 / GL160 SERIES ANSI A156.5 GR
  • Page 133 and 134: SL / T220 COMBO ANSI GRADE 2 LEVERS
  • Page 135 and 136: COLUMBUS QUALITY DESIGNED AND ENGIN
  • Page 137 and 138: EPIC FOR LIGHT COMMERCIAL AND RESID
  • Page 139 and 140: T220 STANDARD DUTY DEADBOLTS GL220
  • Page 141 and 142: LSD SERIES ANSI A156.2 GRADE 3 STAN
  • Page 143 and 144: LEGACY SERIES LEVERSETS WITH PUSH B
  • Page 145 and 146: CONTEMPORARY SERIES LEVERSETS & DEA
  • Page 147 and 148: CHELSIE SERIES LEVERSETS ADA
  • Page 149 and 150: CHELSIE SERIES DEADBOLTS ADA ED-50
  • Page 151 and 152: VANGUARD SERIES LEVERSETS & DEADBOL
  • Page 153: ASHLEY SERIES TUBULAR LOCKSETS / LE
  • Page 156 and 157: TABLE OF CONTENTS ITALIA SERIES D
  • Page 158 and 159: LEVER DESIGNS - HANDED - HOLLOW - S
  • Page 162 and 163: NM SERIES MORTISE LOCK MODEL ANSI A
  • Page 164 and 165: DEADBOLTS RND-500 (round rose) SQR-
  • Page 166 and 167: EXPLODED DIAGRAM ESCUTCHEON WITH TU
  • Page 168 and 169: CARE AND MAINTENANCE MAINTENANCE Ca
  • Page 170 and 171: CYLINDERS AND KEYING REPLACEMENT CY
  • Page 172 and 173: Large Format 6 Pin Interchangeable
  • Page 174 and 175: CYLINDERS AND KEYING HIGH SECURITY
  • Page 176 and 177: SMALL FORMAT INTERCHANGEABLE CORE (
  • Page 178 and 179: KEY BLANKS AND CONTROL KEYS ITEM CO
  • Page 180 and 181: CYLINDERS AND KEYING COMBI KEY SYST
  • Page 183 and 184: hinges hinges
  • Page 186 and 187: TABLE OF CONTENTS I. BASIC INFORMAT
  • Page 188 and 189: ARCHITECTURAL HINGES BASIC INFORMAT
  • Page 190 and 191: ARCHITECTURAL HINGES BASIC INFORMAT
  • Page 192 and 193: ARCHITECTURAL HINGES ITEM # SIZE
  • Page 194 and 195: ARCHITECTURAL HINGES SPRING HINGES
  • Page 196 and 197: ARCHITECTURAL HINGES RESIDENTIAL W
  • Page 198: ARCHITECTURAL HINGES TYPE CAL-ROYAL
  • Page 201 and 202: FULL MORTISE TEMPLATE HINGES Ball B
  • Page 203: SPRING HINGE Full Mortise . Templat
  • Page 206 and 207: CONTINUOUS HINGES Dimensioning Door
  • Page 208 and 209: CONTINUOUS HINGES Concealed / Morti
  • Page 210 and 211:

    CONTINUOUS HINGES Half Surface •

  • Page 213 and 214:

    exit devices exit devices

  • Page 215:

    TABLE OF CONTENTS I. 7700 SERIES RI

  • Page 218 and 219:

    7700 & F7700 Series GRADE 1 Rim Typ

  • Page 220 and 221:

    LBR7760V & LBRF7760V Series GRADE 1

  • Page 222 and 223:

    7700 Series Delayed Egress Models G

  • Page 224 and 225:

    Trim Selection CLUTCH CYLINDRICAL L

  • Page 226 and 227:

    Trim Selection HEAVY DUTY STAINLESS

  • Page 228 and 229:

    distant controller, thus allowing a

  • Page 230 and 231:

    MECHANICAL CRCODE101 Features • H

  • Page 232 and 233:

    MCVR7700 & FMCVR7700 Series Optiona

  • Page 234 and 235:

    MCVR7700, FMCVR7700, WCVR7700 & FWC

  • Page 236 and 237:

    MR7700 & FMR7700 Series GRADE 1 Mor

  • Page 238 and 239:

    GLSCVR7700 & FGLSCVR7700 Series GRA

  • Page 240 and 241:

    Trim Selection PULL DESIGN - FOR GL

  • Page 242 and 243:

    Fire Exit Hardware Selector SINGLE

  • Page 244 and 245:

    Comparison Chart RIM EXIT DEVICE CO

  • Page 246 and 247:

    9800 & F9800 Series A9800 & AF9800

  • Page 248 and 249:

    LBR9860V & LBRF9860V Series ALBR986

  • Page 250 and 251:

    Trim Selection CLUTCH CYLINDRICAL L

  • Page 252 and 253:

    Trim Selection RIGID LEVER ESCUTCHE

  • Page 254 and 255:

    GRADE 1 Rim and Vertical Rod Type E

  • Page 256 and 257:

    MECHANICAL CRCODE101 Features • H

  • Page 258 and 259:

    MCVR9800 & FMCVR9800 Series Optiona

  • Page 260 and 261:

    MCVR9800, FMCVR9800, WCVR9800 & FWC

  • Page 262 and 263:

    MR9800 & FMR9800 Series GRADE 1 Mor

  • Page 264 and 265:

    GLSCVR9800 & FGLSCVR9800 Series GRA

  • Page 266 and 267:

    Trim Selection PULL DESIGN - FOR GL

  • Page 268 and 269:

    Accessories with

  • Page 270 and 271:

    9800 Series ANSI A156.3 Grade 1 Se

  • Page 272 and 273:

    ( ANSI A156.3, Grade 1 Features &

  • Page 274 and 275:

    2260V & F2260V Series A2260V & F226

  • Page 276 and 277:

    Alarm Exit Hardware Features •

  • Page 278 and 279:

    Trim Selection RIGID LEVER ESCUTCHE

  • Page 280 and 281:

    MECHANICAL CRCODE204 Features • B

  • Page 282 and 283:

    driven electric latch retracting ex

  • Page 284 and 285:

    Strike & Accessories 401 406 412

  • Page 286 and 287:

    ANSI A156.3 Grade 1 Selector Chart

  • Page 288 and 289:

    5000 & F5000 Rim Type Panic And Fir

  • Page 290 and 291:

    T5000 & TF5000 Rim Type Panic And F

  • Page 292 and 293:

    T5000V & TF5000V Series MADE IN TAI

  • Page 294 and 295:

    Non-handed Other Lever Trim Des

  • Page 296 and 297:

    Fire Exit Hardware Selector SINGLE

  • Page 298 and 299:

    3/4” Latch Bolt Cross Bar Doggi

  • Page 300 and 301:

    LCKUL424 ICLCKUL424 ICSCLCK424 UL42

  • Page 302 and 303:

    thresholds thresholds

  • Page 305 and 306:

    THRESHOLDS SADDLE THRESHOLDS CR2704

  • Page 307 and 308:

    lites & louvers lites & louvers

  • Page 309:

    TABLE OF CONTENTS I. GLASS TEMP, Te

  • Page 312 and 313:

    GLASS Tempered, Pyran and Wire Shie

  • Page 314 and 315:

    LOUVERS 60-90 Minute Fire-Rated Fus

  • Page 316:

    uilders hardware builders hardware

  • Page 319 and 320:

    TABLE OF CONTENTS XIII. DOOR STOPS

  • Page 321 and 322:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 323 and 324:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 325 and 326:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 327 and 328:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 329 and 330:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 331 and 332:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 333 and 334:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 335 and 336:

    AUTO FLUSH BOLTS AUTOFLM1 AUXAUTOFL

  • Page 337 and 338:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 339 and 340:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 341 and 342:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 343 and 344:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 345 and 346:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 347 and 348:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 349 and 350:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 351 and 352:

    CR550 SERIES • • • •

  • Page 353 and 354:

    Brailled for the Blind ITEM SIZE

  • Page 355 and 356:

    Max Weight for Wood and Glass Doors

  • Page 357 and 358:

    electronic & electrified electronic

  • Page 359 and 360:

    GRADE 1 GRADE 2 DEADBOLTS POWER TRA

  • Page 361 and 362:

    CR3000 DIGITAL KEYPAD DOOR LOCK HEA

  • Page 363 and 364:

    CR6000 DIGITAL TOUCH SCREEN DOOR LO

  • Page 365 and 366:

    PL7100 HEAVY DUTY GRADE 1 COMMERCIA

  • Page 367 and 368:

    APPLE AND ANDROID COMPATIBLE BLE (B

  • Page 369 and 370:

    LOCKSETS CR9000 COMMERCIAL, GRADE 2

  • Page 371 and 372:

    LOCKSETS DB5000 GRADE 2 ELECTRONIC

  • Page 373 and 374:

    DB9000 GRADE 2 ELECTRONIC TOUCHSCRE

  • Page 375 and 376:

    • BUILT-IN Z-WAVE TECHNOLOGY TO C

  • Page 377 and 378:

    LOCKSETS NM / SC SERIES FEATURES:

  • Page 379 and 380:

    EXIT DEVICES DE7700 SERIES DELAYED

  • Page 381 and 382:

    EXIT DEVICES 7700, 9800, 2200 SERIE

  • Page 383 and 384:

    EXIT DEVICES POWER SUPPLIES FOR ELE

  • Page 385 and 386:

    EXIT DEVICES RX and LX SIGNAL SWITC

  • Page 387 and 388:

    ELECTRIFIED HARDWARE CRPT SERIES CO

  • Page 389:

    DOOR CLOSERS CR441EHO CR441 SERIES

Best 40H Series Catalog - Top Notch Distributors, Inc.
HEAVY DUTY MORTISE LOCKS - Best Access Systems
Best 40H Series Catalog - Top Notch Distributors, Inc.
Print Catalog Page - Cal-Royal
Lockdown Options for K-12 School - Chown Hardware
7800/8200 Mortise Locks Functions - Sargent Locks
Residential Box Pack Price Book 72 - Top Notch Distributors, Inc.
Schlage L series catalog - Ingersoll Rand Security Technologies
Components PDF, 0.7 mb - FSB
“NM” SERIES - Cal-Royal
The Guard-X Exit Alarm Lock Catalog - Von Duprin
Von Duprin 98-99 Series Exit Devices - Access Hardware Supply
Yale 8000 series Mortise Lock Catalog - Door Hardware
Panic exit devices - Ceco Door Products
IR Fasttrack April 2010 Pricebook.pdf - Access Hardware Supply
Residential - Top Notch Distributors, Inc.