Views
6 months ago

catalog-2017

MOUNTING INFORMATION

MOUNTING INFORMATION CR441 SERIES : PARALLEL ARM INSTALLATION (PUSH SIDE) 4” (101.6mm) 1 3/4” (44.5mm) 11/16” (17.5mm) 5/16” (8mm) 2 Holes for #14 All-Purpose or 1/4-20 (M6X1.0) Machine Screws 1 11/16” 1 11/16” (43mm) (43mm) 1 1/16” 1 1/16” (27mm) (27mm) 5 Holes for #14 All-Purpose or 1/4-20 (M6X1.0) Machine Screws 7 7/8” (200mm) 2 5/16” (58.7mm) • Butt Hinges should not exceed 5” (127mm) in width. • Auxiliary Stop is recommended at hold-open CR3077SPAS arm is not used. • Top Rail from the stop requires PLATE, CR18PA. Plate requires 2” (51mm) minimum from the stop. • Stop Width minimum 1” (25mm). CUSH arm requires minimum 1 ½” (38mm). • Delayed Action 1 minute. • See Optional Installation for ARMS and BRACKETS available on the next page. 2 1/4” (57mm) 4 Holes for #14 All-Purpose or 1/4-20 (M6X1.0) Machine Screws 1” (25.4mm) 3” (76.2mm) 1” (25.4mm) 6 1/2” (165mm) • RIGHT HAND DOOR SHOWN • SURFACE MOUNTED • ADJUSTABLE AND PRE-SET BACKSET • NON-HOLD OPEN / HOLD OPEN CR18PA CR441 SERIES : OPTIONAL INSTALLATION REGULAR ARM (PULL SIDE) CR18 TRACK ARM MAXIMUM OPENING: 180° (Standard), 120° (Hold Open) OPTIONAL INSTALLATION ARMS • CR3049HO • CR441ARM - Door Closer Arm (Main and Regular Forearm) • CR441EXT - Extended Long Arm (3” extension) for Top Jamb with reveals • TRACK441 TOP JAMB (PUSH SIDE) TRACK ARM CR18TJ • CR18PA - Drop Plate for Parallel Arm Mounting Top Rail is less than 5 ½” Measured from Stop. Plate Requires 2” Minimum Top Rail • CR18 - Drop Plate used where Top Rail is less than 3 ¾” • CR18TJ - Drop Plate for Top Jamb where Face is less than 3 ½” • CR18G - Drop Plate for Top Jamb Mounted Closer Flush with Top of Head Frame Face in Flush Ceiling Condition. Plate Requires 1 ¾” Minimum Head Frame 10

INSTALLATION CR441 SERIES : OPTIONAL INSTALLATION PARALLEL ARM (PUSH SIDE) CR18PA DOOR STOP 3-3/8” (86) 2-1/8” (54) SCREWS FOR SHOE PLATE 1/4 - 20 x 5/6 P.H.M.S (4) OR ST6.3 X 35 P.H.W.S (4) 1/4 - 20 x 1-1/2 P.H.M.S (1) OR ST6.3 X 50 P.H.W.S (1) 5/16” 11/16” (8) (17.5) (60) 2-3/8” (81) 3-3/16” (mm) (81) 3-3/16” 11-1/8” = 85° 10-1/2” = 90° 9-1/4” = 100° 8-3/8” = 110° CR18PA 11/16” (17.5) STOP FACE (24) 15/16” SCREWS FOR DROP PLATE 1/4 20 x 5/6 P.H.M.S (4) OR ST6.3 X 35 P.H.W.S (4) CR18 11-3/8”=85° 7-5/8”=90° 6-1/2”=100° 5-1/2”=110° 1-1/2” (38) 8-1/4” (210) 1-1/2” (38) SCREWS FOR CLOSER 1/4 20 x 2 P.H.M.S (4) MAXIMUM OPENING: 180° (Standard), 120° (Hold Open) OPTIONAL INSTALLATION ARMS • CR3049HO • CR441ARM - Door Closer Arm (Main and Regular Forearm) • CR441EXT - Extended Long Arm (3” Extension) for Top Jamb with Reveals • TRACK441 • CR3049HOSPRING • CR3077SPRING • CR3049HOSRPS • CR3049SPAS • CR3077HDAR BRACKETS • CR18PA - Drop Plate for Parallel Arm Mounting Top Rail is less than 5 ½” Measured from Stop. Plate Requires 2” Minimum Top Rail • CR18 - Drop Plate Used Where Top Rail is less than 3 ¾” • CR18TJ - Drop Plate for Top Jamb where Face is less than 3 ½” • CR18G - Drop Plate for Top Jamb Mounted Closer Flush with Top of Head Frame Face in Flush Ceiling Condition. Plate Requires 1 ¾” Minimum Head Frame • CR441PA 11

  • Page 3: September 2017 TO OUR VALUED CUSTOM
  • Page 6 and 7: HINGES / NRP HINGES • NEW FINISHE
  • Page 8 and 9: BUILDERS HARDWARE • MOVED Auto Fl
  • Page 10 and 11: To Whom It may Concern,
  • Page 12 and 13: Cal-Royal Products, Inc. 2. Section
  • Page 14 and 15: Cal-Royal Products, Inc. is now Flo
  • Page 16 and 17: TERMS AND CONDITIONS FOR CAL-ROYAL
  • Page 18 and 19: Product Warranty EXIT DEVICE TRIMS
  • Page 20 and 21: FINISH MAINTENANCE AND CARE CAL-ROY
  • Page 22 and 23: XIV
  • Page 24 and 25: CAL-ROYAL IS GOING GREEN! To: Cal-R
  • Page 26 and 27: RMA#__________ MUST BE ON ALL PACKA
  • Page 28 and 29: DOOR CLOSERS DOOR CLOSERS
  • Page 30 and 31: TABLE OF CONTENTS I. CAL-ROYAL DOOR
  • Page 32 and 33: REFERENCE & APPLICATION APPLICATION
  • Page 34 and 35: MOUNTING INFORMATION 900 SERIES : R
  • Page 36 and 37: INSTALLATION 900 SERIES : OPTIONAL
  • Page 38 and 39: CR441 SERIES ANSI 156.4 Grade 1, Fu
  • Page 42 and 43: CR441 SERIES ACCESSORIES CONCR441 -
  • Page 44 and 45: CR441 SERIES ACCESSORIES 3049HOSPRI
  • Page 46 and 47: CR801 / CR801S SERIES ANSI 156.4 Gr
  • Page 48 and 49: MOUNTING INFORMATION CR801 / 801S S
  • Page 50 and 51: CR801 / 801S ACCESSORIES 900HOSPRIN
  • Page 52 and 53: MOUNTING INFORMATION 300 SERIES : R
  • Page 54 and 55: 300 SERIES ACCESSORIES OPTIONAL INS
  • Page 56 and 57: MOUNTING INFORMATION 500 SERIES : R
  • Page 58 and 59: 500 SERIES ACCESSORIES OPTIONAL INS
  • Page 60 and 61: MOUNTING INFORMATION 700 SERIES: RE
  • Page 62 and 63: 700 SERIES ACCESSORIES OPTIONAL INS
  • Page 64 and 65: MOUNTING INFORMATION 400 SERIES : R
  • Page 66 and 67: 400 SERIES : ACCESSORIES OPTIONAL I
  • Page 69 and 70: locksets LOCKSETS
  • Page 71 and 72: TABLE OF CONTENTS I. GRADE 1 II. GR
  • Page 74 and 75: 1 ¼” 2 ¾” Heavy gauge zinc
  • Page 76 and 77: NM SERIES SECTIONAL TRIMS & FINISHE
  • Page 78 and 79: Latch bolt retracted by knob or lev
  • Page 80 and 81: HEAVY DUTY ANSI 156.36 GRADE 1 SMAL
  • Page 82: NM SERIES Available on NM8080 and
  • Page 85 and 86: Meets ANSI / BHMA A158.13 Series 10
  • Page 87 and 88: SC SERIES Kits and Accessories Op
  • Page 89 and 90: SC SERIES Grade 1 Heavy Duty Hospit
  • Page 91 and 92:

    HEAVY DUTY ANSI 156.5 GRADE 1 SMALL

  • Page 93 and 94:

    HL - HOSPITAL LATCH LG - ANTI-LIGAT

  • Page 95 and 96:

    HL - HOSPITAL LATCH LG - ANTI-LIGAT

  • Page 97 and 98:

    GENESYS CLUTCH MECHANISM FIXED THRU

  • Page 99 and 100:

    GENESYS CLUTCH MECHANISM FIXED THRU

  • Page 101 and 102:

    CALYPSO CLUTCH MECHANISM FIXED THRU

  • Page 103 and 104:

    OMEGA QUALITY DESIGNED AND ENGINEER

  • Page 105 and 106:

    CRB800 SERIES GRADE 1 HEAVY DUTY DE

  • Page 107 and 108:

    CRCODE200 SERIES GRADE 2 MECHANICAL

  • Page 109 and 110:

    PIONEER SL SERIES (NON-CLUTCH MECHA

  • Page 111 and 112:

    COMMANDER CLUTCH MECHANISM INTERCHA

  • Page 113 and 114:

    EXPLORER XP SERIES (NON CLUTCH MECH

  • Page 115 and 116:

    CHALLENGER NON CLUTCH MECHANISM CYL

  • Page 117 and 118:

    TUSCANY CLUTCH MECHANISM OPTIONAL T

  • Page 119 and 120:

    BARRINGTON QUALITY DESIGNED AND ENG

  • Page 121 and 122:

    HIL SERIES INTERCONNECTED LOCKS 4

  • Page 123 and 124:

    JHIL SERIES INTERCONNECTED LOCKS OP

  • Page 125 and 126:

    JHIL SERIES INTERCONNECTED ENTRANCE

  • Page 127 and 128:

    T300 SERIES ANSI A156.5 GRADE 2 HEA

  • Page 129 and 130:

    T400 MAXIMUM SECURITY HEAVY DUTY DE

  • Page 131 and 132:

    CB160 / GL160 SERIES ANSI A156.5 GR

  • Page 133 and 134:

    SL / T220 COMBO ANSI GRADE 2 LEVERS

  • Page 135 and 136:

    COLUMBUS QUALITY DESIGNED AND ENGIN

  • Page 137 and 138:

    EPIC FOR LIGHT COMMERCIAL AND RESID

  • Page 139 and 140:

    T220 STANDARD DUTY DEADBOLTS GL220

  • Page 141 and 142:

    LSD SERIES ANSI A156.2 GRADE 3 STAN

  • Page 143 and 144:

    LEGACY SERIES LEVERSETS WITH PUSH B

  • Page 145 and 146:

    CONTEMPORARY SERIES LEVERSETS & DEA

  • Page 147 and 148:

    CHELSIE SERIES LEVERSETS ADA

  • Page 149 and 150:

    CHELSIE SERIES DEADBOLTS ADA ED-50

  • Page 151 and 152:

    VANGUARD SERIES LEVERSETS & DEADBOL

  • Page 153:

    ASHLEY SERIES TUBULAR LOCKSETS / LE

  • Page 156 and 157:

    TABLE OF CONTENTS ITALIA SERIES D

  • Page 158 and 159:

    LEVER DESIGNS - HANDED - HOLLOW - S

  • Page 160 and 161:

    TUBULAR LATCH SET APPLICATION For r

  • Page 162 and 163:

    NM SERIES MORTISE LOCK MODEL ANSI A

  • Page 164 and 165:

    DEADBOLTS RND-500 (round rose) SQR-

  • Page 166 and 167:

    EXPLODED DIAGRAM ESCUTCHEON WITH TU

  • Page 168 and 169:

    CARE AND MAINTENANCE MAINTENANCE Ca

  • Page 170 and 171:

    CYLINDERS AND KEYING REPLACEMENT CY

  • Page 172 and 173:

    Large Format 6 Pin Interchangeable

  • Page 174 and 175:

    CYLINDERS AND KEYING HIGH SECURITY

  • Page 176 and 177:

    SMALL FORMAT INTERCHANGEABLE CORE (

  • Page 178 and 179:

    KEY BLANKS AND CONTROL KEYS ITEM CO

  • Page 180 and 181:

    CYLINDERS AND KEYING COMBI KEY SYST

  • Page 183 and 184:

    hinges hinges

  • Page 186 and 187:

    TABLE OF CONTENTS I. BASIC INFORMAT

  • Page 188 and 189:

    ARCHITECTURAL HINGES BASIC INFORMAT

  • Page 190 and 191:

    ARCHITECTURAL HINGES BASIC INFORMAT

  • Page 192 and 193:

    ARCHITECTURAL HINGES ITEM # SIZE

  • Page 194 and 195:

    ARCHITECTURAL HINGES SPRING HINGES

  • Page 196 and 197:

    ARCHITECTURAL HINGES RESIDENTIAL W

  • Page 198:

    ARCHITECTURAL HINGES TYPE CAL-ROYAL

  • Page 201 and 202:

    FULL MORTISE TEMPLATE HINGES Ball B

  • Page 203:

    SPRING HINGE Full Mortise . Templat

  • Page 206 and 207:

    CONTINUOUS HINGES Dimensioning Door

  • Page 208 and 209:

    CONTINUOUS HINGES Concealed / Morti

  • Page 210 and 211:

    CONTINUOUS HINGES Half Surface •

  • Page 213 and 214:

    exit devices exit devices

  • Page 215:

    TABLE OF CONTENTS I. 7700 SERIES RI

  • Page 218 and 219:

    7700 & F7700 Series GRADE 1 Rim Typ

  • Page 220 and 221:

    LBR7760V & LBRF7760V Series GRADE 1

  • Page 222 and 223:

    7700 Series Delayed Egress Models G

  • Page 224 and 225:

    Trim Selection CLUTCH CYLINDRICAL L

  • Page 226 and 227:

    Trim Selection HEAVY DUTY STAINLESS

  • Page 228 and 229:

    distant controller, thus allowing a

  • Page 230 and 231:

    MECHANICAL CRCODE101 Features • H

  • Page 232 and 233:

    MCVR7700 & FMCVR7700 Series Optiona

  • Page 234 and 235:

    MCVR7700, FMCVR7700, WCVR7700 & FWC

  • Page 236 and 237:

    MR7700 & FMR7700 Series GRADE 1 Mor

  • Page 238 and 239:

    GLSCVR7700 & FGLSCVR7700 Series GRA

  • Page 240 and 241:

    Trim Selection PULL DESIGN - FOR GL

  • Page 242 and 243:

    Fire Exit Hardware Selector SINGLE

  • Page 244 and 245:

    Comparison Chart RIM EXIT DEVICE CO

  • Page 246 and 247:

    9800 & F9800 Series A9800 & AF9800

  • Page 248 and 249:

    LBR9860V & LBRF9860V Series ALBR986

  • Page 250 and 251:

    Trim Selection CLUTCH CYLINDRICAL L

  • Page 252 and 253:

    Trim Selection RIGID LEVER ESCUTCHE

  • Page 254 and 255:

    GRADE 1 Rim and Vertical Rod Type E

  • Page 256 and 257:

    MECHANICAL CRCODE101 Features • H

  • Page 258 and 259:

    MCVR9800 & FMCVR9800 Series Optiona

  • Page 260 and 261:

    MCVR9800, FMCVR9800, WCVR9800 & FWC

  • Page 262 and 263:

    MR9800 & FMR9800 Series GRADE 1 Mor

  • Page 264 and 265:

    GLSCVR9800 & FGLSCVR9800 Series GRA

  • Page 266 and 267:

    Trim Selection PULL DESIGN - FOR GL

  • Page 268 and 269:

    Accessories with

  • Page 270 and 271:

    9800 Series ANSI A156.3 Grade 1 Se

  • Page 272 and 273:

    ( ANSI A156.3, Grade 1 Features &

  • Page 274 and 275:

    2260V & F2260V Series A2260V & F226

  • Page 276 and 277:

    Alarm Exit Hardware Features •

  • Page 278 and 279:

    Trim Selection RIGID LEVER ESCUTCHE

  • Page 280 and 281:

    MECHANICAL CRCODE204 Features • B

  • Page 282 and 283:

    driven electric latch retracting ex

  • Page 284 and 285:

    Strike & Accessories 401 406 412

  • Page 286 and 287:

    ANSI A156.3 Grade 1 Selector Chart

  • Page 288 and 289:

    5000 & F5000 Rim Type Panic And Fir

  • Page 290 and 291:

    T5000 & TF5000 Rim Type Panic And F

  • Page 292 and 293:

    T5000V & TF5000V Series MADE IN TAI

  • Page 294 and 295:

    Non-handed Other Lever Trim Des

  • Page 296 and 297:

    Fire Exit Hardware Selector SINGLE

  • Page 298 and 299:

    3/4” Latch Bolt Cross Bar Doggi

  • Page 300 and 301:

    LCKUL424 ICLCKUL424 ICSCLCK424 UL42

  • Page 302 and 303:

    thresholds thresholds

  • Page 305 and 306:

    THRESHOLDS SADDLE THRESHOLDS CR2704

  • Page 307 and 308:

    lites & louvers lites & louvers

  • Page 309:

    TABLE OF CONTENTS I. GLASS TEMP, Te

  • Page 312 and 313:

    GLASS Tempered, Pyran and Wire Shie

  • Page 314 and 315:

    LOUVERS 60-90 Minute Fire-Rated Fus

  • Page 316:

    uilders hardware builders hardware

  • Page 319 and 320:

    TABLE OF CONTENTS XIII. DOOR STOPS

  • Page 321 and 322:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 323 and 324:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 325 and 326:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 327 and 328:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 329 and 330:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 331 and 332:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 333 and 334:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 335 and 336:

    AUTO FLUSH BOLTS AUTOFLM1 AUXAUTOFL

  • Page 337 and 338:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 339 and 340:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 341 and 342:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 343 and 344:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 345 and 346:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 347 and 348:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 349 and 350:

    ILLUSTRATION ITEM SIZE ITEM # FINIS

  • Page 351 and 352:

    CR550 SERIES • • • •

  • Page 353 and 354:

    Brailled for the Blind ITEM SIZE

  • Page 355 and 356:

    Max Weight for Wood and Glass Doors

  • Page 357 and 358:

    electronic & electrified electronic

  • Page 359 and 360:

    GRADE 1 GRADE 2 DEADBOLTS POWER TRA

  • Page 361 and 362:

    CR3000 DIGITAL KEYPAD DOOR LOCK HEA

  • Page 363 and 364:

    CR6000 DIGITAL TOUCH SCREEN DOOR LO

  • Page 365 and 366:

    PL7100 HEAVY DUTY GRADE 1 COMMERCIA

  • Page 367 and 368:

    APPLE AND ANDROID COMPATIBLE BLE (B

  • Page 369 and 370:

    LOCKSETS CR9000 COMMERCIAL, GRADE 2

  • Page 371 and 372:

    LOCKSETS DB5000 GRADE 2 ELECTRONIC

  • Page 373 and 374:

    DB9000 GRADE 2 ELECTRONIC TOUCHSCRE

  • Page 375 and 376:

    • BUILT-IN Z-WAVE TECHNOLOGY TO C

  • Page 377 and 378:

    LOCKSETS NM / SC SERIES FEATURES:

  • Page 379 and 380:

    EXIT DEVICES DE7700 SERIES DELAYED

  • Page 381 and 382:

    EXIT DEVICES 7700, 9800, 2200 SERIE

  • Page 383 and 384:

    EXIT DEVICES POWER SUPPLIES FOR ELE

  • Page 385 and 386:

    EXIT DEVICES RX and LX SIGNAL SWITC

  • Page 387 and 388:

    ELECTRIFIED HARDWARE CRPT SERIES CO

  • Page 389:

    DOOR CLOSERS CR441EHO CR441 SERIES

Best 40H Series Catalog - Top Notch Distributors, Inc.
Best 40H Series Catalog - Top Notch Distributors, Inc.
Print Catalog Page - Cal-Royal
Schlage L series catalog - Ingersoll Rand Security Technologies
HEAVY DUTY MORTISE LOCKS - Best Access Systems
The Guard-X Exit Alarm Lock Catalog - Von Duprin
Von Duprin 98-99 Series Exit Devices - Access Hardware Supply
Components PDF, 0.7 mb - FSB
“NM” SERIES - Cal-Royal
Lockdown Options for K-12 School - Chown Hardware
FSB Lockset Program
7800/8200 Mortise Locks Functions - Sargent Locks
Residential Box Pack Price Book 72 - Top Notch Distributors, Inc.
Yale 8000 series Mortise Lock Catalog - Door Hardware
22 Series Exit Devices - Security Technologies
9K Series Heavy Duty Locks And Levers - DH Pace
Specialty Hardware Catalog - Corbin Russwin
Price Book 2012 - Yates and Felts Inc