Views
9 months ago

Water softeners catalogue

We are a wholesale supplier of products, solutions and services in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers. A catalog that includes products carefully selected from the most prestigious brands in the Water Treatment market, operative site, personalized services, logistics precise and efficient, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, are of Sinergroup Srl a reference for many companies of the sector.

Repeat the procedure

Repeat the procedure until you reach the desired hardness value. To check input/output hardness from the device, we recommend to buy cod. 13000001 Titrant kit total hardness (1°F) 15cc single reagent. TO BUY WITH EVERY SOFTENER 1x 15010101-018 Chlorine generator kit for Autotrol valve 255 1X 02001014 3-pieces standard housing 10" clear IN-OUT 1" with wrench & wall mounting bracket. 2X 04001006-05 Ionicore wound polypropylene cartridge 9-3/4'' - 50 micron (50) 1X Kit 13000001 Titrant total hardness (1 ° F) 15cc single reagent. 1X 15010101-030 Autotrol Valve Bypass 255-1 "M BSP (option C - required first. Installation) * Water softeners are supplied without salt, we recommend to use pads salt. * The pressure tanks are supplied filled up to version "40lit." The device is supplied with chlorine producer assembled and programmed with a input hardness of 40°F, hardness of 0°F output and a safety regeneration every 7 days. A bypass valve system must be installed on all systems. The bypass valves isolate the device from the water system and allow the use of untreated water. Routine maintenance or service may also require that the system is put in bypass. Benefits and advantages Reduction of water hardness, which is cause of scale. ENERGY SAVING: the device prevents the formation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin soft and clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps, fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worry about adding salt in the water softner. Increased sodium (for drinking water) Most of the sodium consumed is taken with foods, especially ones obtained with industrial processing. Salt is a great preservative and therefore is used as an additive for processed products. The assumption of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to produce softened water through ion exchange resins in, produce softened water output sodium ions. The recommended sodium limit for water intended for human consumption is 200ppm liter. Depending on the concentration of sodium and water hardness, it is possible that the water presents a sodium concentration of higher than recommended. Where this is the case or if you need to follow a low salt content, it is advisable to install a reverse osmosis home for water to drink. Features * Min. pressure : 1.38 bar (1.38 kg/cm2) * Max. pressure : 8.27 bar (8.27 kg/cm2) * Minimum temperature: 2°C * Maximum temperature: 38°C * Input / Output water 1" female thread * Exhaust: hose connector with 2m. of tube * Overflow: hose connection 3/8" Model Specifications 15000201-08 8lt. resin. (for 1/2 people) * Exchange capacity: 44ºHFxm3. * Salt consumption for regeneration: 1.24 Kg. / Salt. * Water consumption for regeneration: 53,6lt. * Quantity of water treated for regeneration, 30°F-0,68m3, 35°F-1,26m3, 40°F-1,1m3, 45°F-0,98m3, 50°F-0,88m3, 60°F-0,73m3. * Max. flow 0.32 m3/h Model Specifications 15000201-12 12lt. resin (for 2/3 people) * Exchange capacity: 66ºHFxm3. * Salt consumption for regeneration: 1,8 Kg./salt. * Water consumption for regeneration: 80,4lt. * Quantity of treated water for regeneration, 30°F-2,2m3, 35°F-1,88m3, 40°F-1,65m3, 45°F-1,46m3, 50°F-1,32m3, 60°F-1,1m3. 13 February 2018 26/72

* Max. flow: 0,54m3/h Model Specifications 15000201-15 15lt. resin. (for 3/4 people) * Exchange capacity: 90ºHFxm3. * Salt consumption for regeneration: 2,5 Kg./salt. * Water consumption for regeneration: 100,5lt. * Quantity of water treated for regeneration, 30°F-3,00m3, 35°F-2,57m3, 40°F-2,25m3, 45°F-2,00m3, 50°F-1,8m3, 60°F-1,5m3. * Max. flow 0,68m3/h Model Specifications 15000201-20 20lt. resin. ( for 4/6 People) * Exchange capacity: 110ºHFxm3. * Salt consumption for regeneration: 3,2 Kg./salt. * Water consumption for regeneration: 134lt. * Quantity of water treated for regeneration, 30°F-3,66m3, 35°F-3,14m3, 40°F-2,75m3, 45°F-2,44m3, 50°F-2,2m3, 60°F-1,83m3. * Max. flow 0,942m3/h Model Specifications 15000201-25 25lt. resin. (for 6/8 People) * Exchange capacity: 137ºHFxm3. * Salt consumption for regeneration: 3,9 Kg./salt. * Water consumption for regeneration: 167,5lt. * Quantity of water treated for regeneration, 30°F-4,56m3, 35°F-3,14m3, 40°F-3,91m3, 45°F-3,04m3, 50°F-2,74m3, 60°F-2,28m3. * Max. flow 0,942m3/h Model Specifications 15000201-30 30lt. resin. (for 6/8/10 People) * Exchange capacity: 160ºHFxm3. * Salt consumption for regeneration: 4,3 Kg./salt. * Water consumption for regeneration: 201lt. * Quantity of water treated for regeneration, 30°F-5,33m3, 35°F-4,5m3, 40°F-4m3, 45°F-3,55m3, 50°F-3,2m3, 60°F-2,66m3. * Max. flow 1,47m3/h Model Specifications 15000201-35 35lt. resin. * Exchange capacity: 175ºHFxm3. * Salt consumption for regeneration: 5,2 Kg./salt. * Water consumption for regeneration: 210lt. * Quantity of water treated for regeneration, 30°F-5,83m3, 35°F-5m3, 40°F-4,37m3, 45°F-3,88m3, 50°F-3,5m3, 60°F-2,91m3. * Max. flow 1,56m3/h Model Specifications 15000201-40 40lt. resin. * Exchange capacity: 200ºHFxm3. * Salt consumption for regeneration: 5,9 Kg./salt. * Water consumption for regeneration: 240lt. * Quantity of water treated for regeneration, 30°F-6,66m3, 35°F-5,71m3, 40°F-5m3, 45°F-4,44m3, 50°F-4m3, 60°F-3,33m3. * Max. flow 1,56m3/h Model Specifications 15000201-50 50lt. resin. * Exchange capacity: 250ºHFxm3. * Salt consumption for regeneration: 7,3 Kg./salt. * Water consumption for regeneration: 262lt. * Quantity of water treated for regeneration, 30°F-6,66m3, 35°F-5,71m3, 40°F-5m3, 45°F-4,44m3, 50°F-4m3, 60°F-3,33m3. * Max. flow 1,56m3/h * The pressure tanks are supplied filled up to version "40lit." 13 February 2018 27/72

Water softeners catalogue
Filter housings catalogue
Carbon Dioxide cylinder Disposable Rechargeable CO2 catalogue
Rechargeable Cartridges catalogue
Reverse Osmosis Membranes catalogue
Filter housings catalogue
Soda Breezy Spare Parts catalogue
Installation accessories catalogue
Soda Breezy Spare Parts catalogue
Ozone generator catalog
Carbon Dioxide cylinder Disposable Rechargeable CO2 catalogue
In Line Filters catalog
Drop In Housings Cartridges catalogue
Reverse Osmosis Membranes catalogue
Residential Microfiltration catalogue
Commercial Reverse Osmosis catalogue
Drop In Housings Cartridges catalogue
In Line Filters catalog
18 July 2015 Sinergroup Products Catalog Water Softeners Reverse Osmosis Water Coolers
In Line Filters catalog
Sinergroup Water softeners Catalog - Residential cabinets Residential single tank Accessories softeners autotrol residential valve Fleck sxt residential valve ci clack residential valve Cabinets and brine tank water softeners spare parts Pressure tanks
Sinergroup Maintenance Water Softeners Catalog
SInergroup Products Catalog Everpure Filters Pentek Water Softener Reverse Osmosis
Sinergroup Installation accessories Catalog Mechanical water counter Digital meter Reducing water pressure Adaptors Clip Connectors Diverters Tube inserts
Sinergroup Antiscale Washing Machine Filter Catalog
Sinergroup Filter housings Catalog - Standard housings, Big housings, Housings brackets, Housings wrenches
Sinergroup Pentair Water Q.C. Series for Home Filtration Kit Catalog
Sinergroup Reverse osmosis - spare parts solenoid valves sensors Catalog
Sinergroup Carbon Dioxide cylinder Catalog Disposable Rechargeable
Sinergroup Commercial Reverse Osmosis Catalog