We are a wholesale supplier of products, solutions and services in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers. A catalog that includes products carefully selected from the most prestigious brands in the Water Treatment market, operative site, personalized services, logistics precise and efficient, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, are of Sinergroup Srl a reference for many companies of the sector.
* Cable length : 1.5 M for solenoid valve cord * Water leak detecting method : Control unit with detecting metal put on the floor near water filter * Environment temperature : -20 ~ 80°C. * AS-414 Maximum Pressure : 6 Bar * AS-413BR, AS-414BR Maximum Pressure : 8 Bar Operating instruction Installation : 1-Install the proper fitting with the solenoid valve. The thread of solenoid valve is 3/8" or 1/2”. Then connect the inlet tube of the water treatment system with the solenoid valve. 2-Reset to work Keep pressing button for 4 seconds, the control unit activates solenoid valve to open the inlet tube of water treatment system, and generates a long beep sound. 3-Auto shut off when water leak is detected The control unit shuts activate solenoid valve to shut off the inlet tube of the water treatment system to block water flow, and generates an acoustic signal, “beep-beep” , and blinks the blue light continuously to notify the water leak is detected. After the leakage problem is solved, keep pressing button for 4 seconds, the control unit activates solenoid valve to open the inlet tube of water treatment system again with a long beep sound. 4-Low power shut off When the battery power is low, the control unit shuts off the inlet tube of the water treatment system, blinks red light and generates an acoustic signal “beep” to notify that the battery needs to be replaced to keep water leak protection be functional. Code: 01013004 Mechanical leaking sensor 1/4" Variants Code Description 01013004-01 Mechanical leaking sensor 1/4" complete system 01013004-02 Replacement instant wet towel-coin tissue for mechanical leaking sensor Functioning: It is installed under the water purifier with 2 screws or double-sided tape present in the pack. Base predisposed for 2 screws. When the towel-coin is wet, it expands and activates the water locking mechanism. 13 February 2018 28/30
In-let and drain valves Code: 01003001 SV-6 Saddle Valve , Tube 1/4" Code: 01003002 Drain Clamp 1/4'' Variants Code Description 01003002-01 Drain Clamp 1/4'' black (50) 01003002-02 Drain Clamp 1/4'' White Code: 01003003 Drain Clamp quick fitting 1/4'', 3/8" Variants Code Description 01003003-14 Drain Clamp quick fitting 1/4'' 01003003-38 Drain Clamp quick fitting 3/8" 13 February 2018 29/30