Industrial PC 116 C69xx | Industrial PC series for control cabinet installation www.beckhoff.com/C69xx The C69xx Industrial PC series is designed for installation in control cabinets. The compact aluminium housing of the C69xx Industrial PCs is equipped with a 3½-inch motherboard. All PC connections are on one side of the housing. The PC can optionally be equipped with mounting plates on two sides and fastened with screws in the control cabinet. Installation is possible at the rear panel or on the right-hand side panel. The C69xx series PCs are supplied with a 24 V DC power supply unit, optionally with integrated uninterruptible power supply (UPS). A battery pack can be connected externally and installed on a DIN rail close to the PC. Cooling fins behind the right-hand side panel enable fanless operation of the PC at temperatures up to 55 °C. The four types of Industrial PCs in the C69xx series differ in their processors and data storage devices. Cooling of the C6915 with Intel ® Atom with up to four cores and the C6925 with Intel ® Celeron ® ULV or Intel ® Atom with up to four cores requires no fan. The basic configuration of the C6915 and C6925 features a flash disk, thus creating PCs without moving parts. A hard disk or a second flash card can be integrated in all of the PCs from this series as an option. C6905 We reserve the right to make technical changes.
Industrial PC 117 C6915 C6920 basic configuration C6920 with plug-in card slots C6925 C6930 basic configuration C6930 with plug-in card slots The C6920 with Intel ® Celeron ® or Core i3/i5/i7 of the latest generation has an easily exchangeable fan cartridge on the underside of the housing. The C6930 Industrial PC is also offered with Intel ® Celeron ® or Core i3/i5/i7 of the latest generation. It has a SATA RAID controller for mirroring two hard disks, SSDs or CFast cards. In the basic configuration, one of the two hard disk slots is equipped with a 2½ inch drive. A second hard disk is offered as an option. In addition, a CFast slot is accessible behind the front cover. Industrial PCs of this series and a Beckhoff Control Panel with DVI and USB connection make an ideal combination and offer a high-performance control platform for mechanical engineering applications, particularly in conjunction with the TwinCAT automation software under Windows 10 IoT Enterprise, up to the 6 th generation of Core processor also under Windows 7 Professional, Windows 7 Ultimate, Windows Embedded Standard 7, with Intel ® Atom also under Windows Embedded Compact 7. Due to its two independent Ethernet interfaces, the C69xx is ideally suited as a compact central processing unit for an EtherCAT control system. Lithium battery easily accessible 24 V DC power supply, optionally with UPS C6930: 2 PCIe module slots CFast card 2 nd serial interface with output via PCIe module slot 4 USB ports On-board dual Ethernet adapter Optionally 2 PCI or PCIe plug-in card slots 3½-inch motherboard Hard disk or SSD DVI connection Serial interface Mini PCI slot for fieldbus cards We reserve the right to make technical changes.