AX5000 | Digital Compact Servo Drives u www.beckhoff.com/AX5000 Optional slot for interface boards, e.g. additional feedback Optional slot for TwinSAFE safety cards Drive Technology 338 Motor feedback: Sin/Cos 1 VPP, EnDat, Hiperface, BiSS Motor feedback: resolver 8 digital I/Os, e.g. enable, limit switch, capture input, error message Navigation buttons EtherCAT system bus Motor feedback (only for AX52xx 2-axis module): Sin/Cos 1 VPP, EnDat, Hiperface, BiSS Motor feedback (only for AX52xx 2-axis module): resolver Status display, e.g. axis identifier or a diagnostic message Operating material identification 24 V DC control and braking voltage DC-Link system or external braking resistor Power supply 100 V AC -10 %… 480 V AC +10 % Motor outputs Brake control, motor temperature monitoring, OCT We reserve the right to make technical changes.
AX5101–AX5112 | 1-channel, up to 12 A AX52xx | 2-chan nel, up to 2 x 6 A AX5118–AX5140 | 1-channel, 18/25/40 A AX5160, AX5172 | 1-channel, 60/72 A AX5190, AX5191 | 1-channel, 90/110 A AX5192, AX5193 | 1-channel, 143/170 A The EtherCAT drives The AX5000 Servo Drive product line from Beckhoff sets new standards in drive performance. The AX5000 series is available in single- or multi-channel form and is optimised for exceptional functionality and cost-effectiveness. Featuring integrated, high-speed control technology with a current control cycle of down to 62.5 μs, the AX5000 drives support fast and highly dynamic positioning tasks. The drives utilise EtherCAT as a high-performance communication system, providing an ideal interface with PC-based control technology while supporting coupling with other fieldbus systems. The 2-channel Servo Drives with variable motor output current optimise the packaging density and the cost per drive channel. The compact design and simple and safe installation through the “AX-Bridge” quick connection system significantly simplify control cabinet assembly. Technical highlights – fast control algorithms – current control: min. 62.5 μs – speed control: min. 62.5 μs – position control: min. 62.5 μs – variably adjustable current and speed filters – high-speed EtherCAT system communication – 1- or 2-channel Servo Drive – optimised for multi-axis applications – variable motor output current in 2-channel drives – active DC-Link and brake energy management via AX-Bridge – variable motor interface with – multi-feedback interface – flexible motor type selection – scalable, wide range motor current measurement – OCT (One Cable Technology) – electronic identification plate – high-speed capture inputs – eight programmable digital I/Os, two with timestamp – mains connection – wide voltage range 100…480 V AC – integrated mains filter – integration of safety functions (optional) – STO, SS1 – TwinSAFE: intelligent safety functions for Motion Control with AX58xx – compact design for simple control cabinet installation (300 mm depth) – AX-Bridge – the quick connection system for power supply, DC-Link and control voltage – variable cooling concept (fanless, forced cooling) Drive Technology 339 Technical data AX5000 Bus system EtherCAT Drive profile SERCOS profile for servo drives according to IEC 61800 7 204 (SoE) Rated supply voltage 100…480 V AC, 50/60 Hz DC-Link voltage max. 875 V DC Current control 62.5 µs Design form compact Servo Drive in 1- and 2-channel models, multi-axis systems with AX-Bridge Protection class IP 20 Operating temperature AX5x01…AX5140: 0…50 °C, AX5160…AX5193: 0…40 °C Approvals CE, cULus We reserve the right to make technical changes.