Laboratory Equipment

CYANOACRYLATE FUMING CHAMBERS AND FILTERS
The Cyanoacrylate Fuming Chamber is used to develop latent prints from
non-porous surfaces in a controlled and safe environment. The ductless
design allows immediate use. Simply plug-in and go.
Cyanoacrylate is placed inside the chamber while evidence is easily posioned
using the adjustable hanging rods. Star ng the cycle triggers the
automated system to control the hotplate, humidity, door lock, internal
circula on fan, and purge cycle.
Its recirculatory design makes the unit ‘ready to use' with no duc ng required
for its opera on or setup. The Cyanoacrylate vapours are filtered
by a special carbon filter. This ensures that no dangerous substances are
exhausted in to the atmosphere surrounding the laboratory. Its ductless
construc on also allows the unit to be easily moved and transported.
The easy to use control displays all parameters of the processing cycle.
Adjustments to the presets can be quickly performed. Display features
include: Hot plate, Humidity, Temperature, Circula on fan, Cycle me,
Lights, Door posi on with lock alarm, Filter condi on, Purge cycle with emergency stop.
FC-CA-60-01
External Dimensions(w x d x h) : 60cm x 60cm x 76cm
Internal Dimensions (w x d x h) : 58cm x 58cm x 70cm
Airflow (m3/hr): 175
Prefilter (efficiencies superior to 99.6%): 1
Main Filter 5kg: 1
Electrical Supply: Single Phase 230v, 50Hz
Noise (dBA) :

FC-CA-150-01
External Dimensions( w x d x h) : 152cm x 75cm x 155cm
Internal Dimensions (w x d x h): 141cm x 67cm x 147cm
Airflow (m3/hr): 250
Prefilter (efficiencies superior to 99.6%): 1
Main Filter 5kg: 1
Electrical Supply: Single Phase 230v, 50Hz
Noise (dBA) :

Downflow Worksta ons (DWS) & Filters
The DWS is a compact bench mounted Downflow Worksta on. It is
ideal for operators handling harmful substances that require unrestricted
access to their work area. Simply plug-in for immediate
use. - Harmful fumes pass through the units filters, re-circula ng
clean air back into the laboratory. - There is no need for expensive
duc ng to be installed due to the units re-circulatory airflow. - Its
ductless construc on allows for the unit to be easily moved. - Carbon
and HEPA filters are available to suit most laboratory applicaons.
- The stainless steel tray is removable for easy cleaning. - The
safety alarm will alert the operator if face velocity falls below 0.3
M/Sec.
FC-DWS-60-01
Dimensions (w x d x h): 62cm x 58cm x 80 cm Main Filter Weight: 8
Airflow (m 3/hr): 248 Working Height: 40 cm Prefilter (efficiencies
superior to 99.6%): 1 Face Velocity (m3/sec): >0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA): 0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA):
0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA):
0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA):

DUCTLESS FUME HOODS
FC 10 - FC 30 Benchtop Fume Cupboards & Filters
A range of 5 benchtop Fume Cupboards suitable
for a broad range of professional laboratory applica
ons and requirements. Their ductless construcon
means they are ready to plugin and use.
- Harmful fumes pass through the units filters, recircula
ng clean air back into the laboratory.
- There is no need for expensive duc ng to be installed due to the units re-circulatory airflow.
- Designed by leading fume filtra on specialist, John Haugh.
- The safety alarm will alert the operator if face velocity falls below 0.3 M/Sec.
- Its ductless construc on allows for the unit to be easily moved.
- All Fume Cupboards are delivered in 2 easy to assemble sec ons.
- Internal ligh ng illuminates the work surface. - Carbon and HEPA filters are available to suit most laboratory applica ons.
- Cable pass through ports allow electrical cords to enter the work zone.
- Clear acrylic panels allow for tri-direc onal viewing.
- The acrylic construc on also allows for easy cleaning.
-Electronic monitoring systems are available as an op on.
FC-FC-10 Dimensions (w x d x h): 75cm x 60cm x 121cm Working Base Area: 70 cm x 65cm Main Filter 12kg (qty): 1 Safety Filter 5kg
(qty):1 Airflow (m 3/hr): 246 Prefilter (efficiencies superior to 99.6%): 1 Noise (dBA):0.5 Electrical Supply:
Single Phase, 230V, 50Hz Noise (dBA): 0.5 Electrical Supply: Single
Phase, 230V, 50Hz Noise (dBA):

FC5 Benchtop Fume Cupboards & Filters
The Economy FC5 is a compact bench mounted Fume Cupboard ideal for laboratories where space is
limited or where only small volumes of harmful substances are handled. Simply plug-in for immediate
use.
- Harmful fumes pass through the units filters, re-circula ng clean air back into the laboratory.
- There is no need for expensive duc ng to be installed due to the units recirculatory airflow.
- The safety alarm will alert the operator if face velocity falls below 0.3 M/Sec.
- Its ductless construc on allows for the unit to be easily moved.
- Carbon and HEPA filters are available to suit most laboratory applica ons.
- Internal ligh ng illuminates the work surface.
- Clear Acrylic panels allow for ‘all-round' viewing.
- The Acrylic construc on also allows for easy cleaning.
FC-FC5-60-01
Dimensions (w x d x h): 60cm x 67cm x 90cm
Working Base Area: 58 cm x 52 cm
Main Filter 12kg (qty): 1
Airflow (m 3/hr): 200
Prefilter (efficiencies superior to 99.6%): 1
Face Velocity (m3/sec): >0.5
Electrical Supply: Single Phase, 230V, 50Hz
Noise (dBA): 55
Ligh ng (wa s): 15
Switches: Mains On/OFF
Monitoring: Low Airflow Indicator
Fan: Low Noise Centrifugal
Cabinet Construc on: Epoxy coated mild steel frame and head
unit
Panel Construc on: Clear acrylic
FC-FC5-90-01
Dimensions (w x d x h): 91.5cm x 67cm x 90cm
Working Base Area: 89.5 cm x 52 cm
Main Filter 12kg (qty): 1
Airflow (m 3/hr): 200
Prefilter (efficiencies superior to 99.6%): 1
Face Velocity (m3/sec): >0.5
Electrical Supply: Single Phase, 230V, 50Hz
Noise (dBA): 55
Ligh ng (wa s): 15
Switches: Mains On/OFF
Monitoring: Low Airflow Indicator
Fan: Low Noise Centrifugal
Cabinet Construc on: Epoxy coated mild steel frame and head
unit
Panel Construc on: Clear acrylic
FC-FC5-120-01
Dimensions (w x d x h): 120cm x 67cm x 90cm
Working Base Area: 119 cm x 52 cm
Main Filter 12kg (qty): 1
Airflow (m 3/hr): 400
Prefilter (efficiencies superior to 99.6%): 2
Face Velocity (m3/sec): >0.5
Electrical Supply: Single Phase, 230V, 50Hz
Noise (dBA):

Mobile Ductless Fume Cupboard
The Graduate is a mobile Fume Cupboard with all-round viewing windows. This makes it ideal for
demonstra on purposes and laboratories requiring a unit that is easily manoeuvred. Simply plug-in
for immediate use. Harmful fumes pass through the units filters, re-circula ng clean air back into the
laboratory. There is no need for expensive duc ng to be installed due to the units recirculatory airflow.
The safety alarm will alert the operator if face velocity falls below 0.5 M/Sec. Its ductless construc
on allows for the unit to be easily moved. Carbon and HEPA filters are available to suit most
laboratory applica ons. Pass through ports and quick release hose connectors for Gas, Water and
Waste. Designed by leading fume filtra on specialist, John Haugh. Internal ligh ng illuminates the
work surface. Clear acrylic panels allows for ‘all-round’ viewing. The acrylic construc on also allows
for easy cleaning.
FC-GRD-001-01 Dimensions (w x d x h): 100cm x 74cm x 197cm Main Filter 12kg (qty): 1 Airflow (m 3/hr): 250 Prefilter (efficiencies
superior to 99.6%): 1 Noise (dBA):0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA):

EVIDENCE DRYING CABINETS
The Forensic Evidence Cabinet is used for drying
and storing evidence recovered from a crime scene.
The cabinet will ensure containment of
fumes, odours and par culates, whilst also minimizing
the risk of cross contamina on.
Controls are located at front of the cabinet and
include:
Humidity sensor to inform the operator when the
evidence is dry and ready to remove.
Security tags and Key Locks on main access door.
Low Airflow Alarm for blocked filters.
Op onal heater in top sec on to maintain ambient
temperature in cold loca ons.
Its recirculatory design makes the unit ‘ready to use' with no duc ng required for its opera on or setup. Air entering into the top
of the cabinet is first passed through an inlet pre-filter and then through a HEPA par culate filter to ensure it is clean and sterile.
The sterile air then passes downwards through the cabinet in an laminar follow pa ern ensuring evidence is dried under sterile air
condi ons. Vapours, odours and par culates given from drying evidence are filtered by both special carbon and HEPA filters located
in the base unit. This ensures that no dangerous substances are exhausted in to the atmosphere surrounding the laboratory. Its
ductless construc on also allows the unit to be easily moved and transported.
Corrosion proof interior design increases opera onal life, with the use of reinforced plas cs that are resistant to corrosion from
various liquids and fumes.
Each cabinet includes a complete plumbing package that makes cleaning the cabinet easy. The spray hose is kept outside the
working compartment at all mes to prevent the chance of cross contamina on. A drain outlet with flexible hose is provided to
allow waste water to be removed from the cabinet. The space inside the cabinet can be used to provide full length hanging space
and with removable shelves for storage of smaller items.
Op onal accessories include: Ligh ng, Starter Kit, Pre filters

FINGERPRINT DEVELOPMENT
Downflow Worksta ons & Filters
The DWS is a compact bench mounted
Downflow Worksta on. It is ideal for operators
handling harmful substances that
require unrestricted access to their work
area. Simply plug-in for immediate use.
- Harmful fumes pass through the units
filters, recircula ng clean air back into the
laboratory.
- There is no need for expensive duc ng to
be installed due to the units re-circulatory
airflow.
- Its ductless construc on allows for the unit to be easily moved.
- Carbon and HEPA filters are available to suit most laboratory applica ons.
- The stainless steel tray is removable for easy cleaning.
- The safety alarm will alert the operator if face velocity falls below 0.3 M/Sec.
FC-DWS-60-01 Dimensions (w x d x h): 62cm x 58cm x 80 cm Main Filter Weight: 8 Airflow (m 3/hr): 248 Working Height: 40 cm
Prefilter (efficiencies superior to 99.6%): 1 Face Velocity (m3/sec): >0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA): 0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA): 0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA):

Downdra Tables
Freestanding Downdra Tables are designed
to give operator protec on while allowing
complete, easy and open access to the working
area. Harmful fumes and vapours are
drawn downward through the stainless steel
worksurface to the units filters. Clean air is
then re-circulated back into the laboratory.
- The safety alarm will alert the operator if
worksurface face velocity falls below 0.3 M/
Sec.
- There is no need for expensive duc ng to be
installed due to the units recirculatory airflow.
- Designed by leading fume filtra on specialist, John Haugh.
- Carbon and HEPA filters are available to suit most laboratory applica ons.
- The polypropylene and stainless steel construc on also allows for easy cleaning.
- Product manufactured in ISO 9001 quality controlled facili es
FC-FDT-100-01 Dimensions (w x d x h): 100cm x 70cm x 90cm Working Base Area: 80cm x 45cm Main Filter 12kg (qty): 1 Op onal
Safety Filter 4kg (qty): 1 Airflow (m 3/hr): 250 Sink & Tap: N/A Prefilter (efficiencies superior to 99.6%): 1 Face Velocity (m3/sec):
>0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA): 0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA): 0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA):

Dye Staining Benches & Filters
Dye Staining Benches are designed to give operator protec on from
the Ethanol dye used during the forensic process of developing latent
finger prints from non-porous surfaces. The Polypropylene sink, dye
storage tank, water facili es and open work surface provide the op -
mum environment for the efficient processing of such prints.
- There is no need for expensive duc ng to be installed due to the
units re-circulatory airflow.
- The polypropylene and stainless steel construc on also allows for
easy cleaning.
- The worksurfaces will not rust or corrode when in contact with water
and chemicals.
- Carbon and HEPA filters are available to suit most laboratory applica ons.
- The harmful fumes and vapours are drawn downward through the worksurface to the units filters. Clean air is then re-circulated
back into the laboratory.
-The safety alarm will alert the operator if work surface face velocity falls below 0.3 M/Sec.
FC-DSB-120-01 Dimensions (w x d x h): 120cm x 70cm x 135cm Working Base Area: 85cm x 59 cm Main Filter 12kg (qty): 2 Op onal
Safety Filter 4kg (qty): 2 Airflow (m 3/hr): 500 Prefilter (efficiencies superior to 99.6%): 2 Sink, Cold Tap & Hand Shower: Yes Face
Velocity (m3/sec): >0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA): 0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA): 0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise (dBA):

Inset Downdra Tables
Inset Downdra Tables are designed to give operator
protec on while allowing complete, easy and open
access to the working area. Harmful fumes and vapours
are drawn downward through the stainless steel worksurface
to the units filters. Clean air is then recirculated
back into the laboratory. The inset design fits
flush in to an exis ng bench top. Ideal to save space or
use when a freestanding bench is not suitable. There is
no need for expensive duc ng to be installed due to
the units recirculatory airflow. The safety alarm will alert the operator if worksurface face velocity falls below 0.3 M/Sec. Carbon
and HEPA filters are available to suit most laboratory applica ons. The polypropylene and stainless steel construc on also allows
for easy cleaning. The worksurfaces will not rust or corrode when in contact with water and chemicals.
FC-IDT-60-01 Dimensions (w x d x h): 60cm x 45cm x 40cm Working Base Area:55cm x 40cm Main Filter 12kg (qty): 1 Airflow (m 3/
hr): 200 Prefilter (efficiencies superior to 99.6%): 1 Face Velocity (m3/sec): >0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise
(dBA): 55 Switches: Mains On/OFF Monitoring: Low Airflow Indicator Fan: Low Noise Centrifugal Construc on: White polypropylene
with perforated stainless steel work surface
FC-IDT-90-01 Dimensions (w x d x h): 91.5cm x 45cm x 40cm Working Base Area:86.5cm x 40cm Main Filter 12kg (qty): 1 Airflow (m
3/hr): 200 Prefilter (efficiencies superior to 99.6%): 1 Face Velocity (m3/sec): >0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise
(dBA): 0.5 Electrical Supply: Single Phase, 230V, 50Hz Noise
(dBA):