Views
3 months ago

V27 Software Guide Pulpmatic Ultima Eco Uno Incomatic V1.7

• Locate Dip switch 3

• Locate Dip switch 3 and move it UP, note the position of the resistor Dip Switch 3 Dip Switch 3 • Refit the PCB housing lid • Refit the front panel • Turn the machine ON at the isolation switch The machine is now in “workshop test mode” and will allow the machine to cycle continuously without the need for any user input Copyright © 2017 DDC Dolphin Ltd. Page 42 of 47 February 18 SGPv27 – V1.7

17. Resistor values & colours Listed below are the machine identity resistors attached to the control PCB. These resistors instruct the software which machine the PCB is fitted too and runs the appropriate software for that machine. Colour Description Resistor rating Machine Electrics Incomatic macerators White Single phase Incomatic 10k Ω 240V Grey Three phase Incomatic 12k Ω 415V Pulpmatic macerators Black Single phase Pulpmatic + 1.5k Ω 240V Green Single phase Ultima UL 5.6k Ω 100-120V Black Single phase Ultima 1.5k Ω 240V Black Single phase Ultima 1.5k Ω 100-120V Black Single phase Eco 1.5k Ω 240V Brown Three phase Ultima 7.5k Ω 415V Green Single phase Uno 5.6k Ω 240V/110V Copyright © 2017 DDC Dolphin Ltd. Page 43 of 47 February 18 SGPv27 – V1.7

A Leader's Guide to Agile Business - Rally Software
Medical Office Software Guide
WinAlign® Software
License Administration Guide - Sonnet Software
Agile Development, DevOps and achieving ... - Rally Software
Geovision NVR Software Feature Guide - Use-IP
Product datasheet: Sony SNC-DH240T - Network Webcams
software validation - Pharsight Corporation
TerraExplorer Quick Start Guide - Skyline Software Systems
SNC-CH220 - Sony Professional Solutions Asia Pacific
Camera IP HD de tip bullet Sony SNC-CH160 - GTO Security ...
EtherLogic Ultima Controller - Industrial Control Links
Polycom UC Software Administrators' Guide
Polycom UC Software Administrators' Guide - 4.1.0
Polycom UC Software 4.0.1 Administrators' Guide