Views
4 months ago

construction chemicals

CONSUMPTION Recommended

CONSUMPTION Recommended consumption amounts for application in roughly 1 cm thickness on 1 m 2 surface; - Gas concrete surface: 15.0 - 16.0 kg - Prime coated concrete surface: 17.0 - 18.0 kg - Briquette surface: 17.5 - 18.5 kg - Brick surface: 20.5 - 21.5 kg The said values may vary, depending on the surface and ambient conditions. PACKAGING MegaSıva Elyaflı K is delivered in net 35 kg kraft bags, which are stowed in 42 pcs. on a 80 cm x 120 cm palette (1470 kg). SHELF LIFE The shelf life of the product is 12 months when stored within non tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. STORAGE CONDITIONS The product should be stored within non tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. It should not be exposed to direct sunlight. The container of the product should be closed firmly when not used. SAFETY PRECAUTIONS Please refer to the Safety Data Sheet (SDS) as appropriate for easy and safe application. 115

MegaSıva Makine İç Cement Based, Machine Applied Plaster With Enhanced Adherence For Indoor Use PRODUCT DESCRIPTION Cement based, machine applied plaster for indoor use with filling material content in appropriate granulometry, which has been enriched with special chemical for enhanced workability and strength. AREAS OF USE MegaSıva Makine İç is applied in indoors spaces on prime coated gas concrete, prime coated concrete, briquette, brick and natural rock vertical surfaces and ceilings. PRODUCT ADVANTAGES • Ensuring high bonding to the surface, the product does not cause spalling and poses high bonding strength. • Functions as both roughcast and fine plaster with a single coat application. • Easily and rapidly applied by machine. PERFORMANCE Dry bulk density 1.65 ± 0.1 gr/cm 3 TS EN 1015 - 10 Compressive strength CS IV TS EN 1015 - 11 Bonding strength > 0.2 N/mm 2 TS EN 1015 - 12 Capillary water absorption coefficient W 0 TS EN 1015 - 18 Water vapor permeability µ < 10 TS EN 1015 - 19 Air content % 7 ± 0,5 TS EN 1015 - 7 > 3 hours (at 20 ± 5°C Workability time temperature and minimum 95 % TS EN 1015 - 9 relative humidity) Reaction to fire A1 TS EN 13501 - 1 The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. REFERENCE STANDARDS Certifications/Standards TS EN 998 - 1 (GP) Ministry of Public Works and Settlement Item No. Ministry of Public Works and Settlement Item No.: 04.476 QUALITY CERTIFICATES Conformant to TS EN 998 - 1. CE APPLICATION PROCEDURE Application Surfaces Indoors Walls; - Gas concrete (MegaFilm primer applied) - Concrete (MegaFilm or MegaFilm BB primer applied) - Briquette - Brick - Natural rock Ceilings; - Concrete (MegaFilm or MegaFilm BB primer applied) Surface Preparation • The application surface should be dry, clean, sound and dust free, and should have been cleansed of oil, dirt or any materials that may prevent adhesion, and any such materials as mortar and cement residues should be scraped from the application surface. • The surface defects, which are deeper than 1 cm, should be repaired with MegaTamir İ or MegaTamir K 24 hours in advance. In the cases, where structural repair mortar should be used; MegaTamir İ Yapısal or MegaTamir K Yapısal should be preferred. • The application surfaces should be moisturized with water, where necessary. • Upon the completion of the surface cleaning, MegaFilm primer should be applied in a single coat with a brush and be left to dry for 1 to 2 hours in order to enhance the bonding strength and stabilize the surface absorption. • Gas concrete surfaces should, prior to the application of the product, be applied MegaFilm primer and the water absorption of the surfaces should so be reduced. • Exposed concrete surfaces should be applied MegaFilm BB exposed concrete primer in single coat and be left to dry for minimum 3 hours prior to the application of the adhesive mortar in order to enhance the adhesion strength. Application Methods • The application thickness should range between 1.0 cm and 2.5 cm in single coat. In the cases where the application thickness is to exceed 2.5 cm, an additional coat of maximum 2 cm thickness should be applied upon the sufficient hardening of the primary coat. • The surface should be gauged and finished after the application. Application Recommendations • The surface should be moisturized intermittently for a period 7 days following the application in order to enhance the endurance of the plaster. • The product should not be applied to gypsum surfaces. • The product should, once mixed, be used before the expiration of its pot life. Any product, the pot life of which has expired, should not be used during the application. • Any such foreign substance as lime, cement or plaster should not be added to the mortar prepared. • Any extra water should not be added to the mixture. • The product should not be applied on unsound surfaces. The soundness and the load bearing capacity of old surfaces should be checked prior to adhesion. • The surface should be preserved from air currents and water contact during and after the application. • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing. • Due care should be taken to ensure that the material is not exposed to direct sunlight in hot weather conditions, and the product should be mixed with cold water. • The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance. • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours. • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595) Surface and Ambient Temperature The surface and ambient temperature should be between +5°C and +30°C whilst at application. Application Limits Useful time for prepared mortar - Pot life Plaster surface smoothing time Through dry time The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. APPLICATION INSTRUCTIONS Mixing Ratio The product should be mixed with water, weighing equal to 18 - 20 % of the product. (6.0 - 7.0 liters of water for a 35 kg package) Mixing Equipment Premixed plaster mixing and spraying machine Mixing Period The mortar shall be applied with the premixed plaster mixing and spraying machine. Application Equipment Premixed plaster mixing and spraying machine Maximum 30 minutes Maximum 30 minutes Minimum 2 days Equipment Cleaning The equipment used should be cleaned with water following the application before the mortar dries. TECHNICAL PROPERTIES Chemical Structure: Cement based, machine applied plaster for outdoor use, containing filling material content in appropriate granulometry and special chemical for enhanced workability and strength Dry Density: 1.65 ± 0.1 gr/cm 3 Mortar Density: 1.85 ± 0.1 gr/cm 3 Grain Size: ≤ 1800 µm Coat Thickness: Maximum 1.0 cm - 2.5 cm (single coat) Color: Gray CONSUMPTION Recommended consumption amounts for application in roughly 1 cm thickness on 1 m 2 surface; - Prime coated concrete: 20.0 - 21.0 kg - Briquette Surface: 18.5 - 19.5 kg - Brick Surface: 23.5 - 24.5 kg The said values may vary, depending on the surface and ambient conditions. 116

Nanotechnology and Construction
Module 4 - Construction of a gravity fed system
Mapecem Premix Mapecem Premix - Northland Construction Supplies
PIPELINE REHABILITATION – PROTEGOL ... - TIB Chemicals AG
Flooring Systems Brochure Download (938Kb) - Triton Chemicals
Applying An External Chemical Stimulus
TEX•COTE® XL-70® BRIDGE•COTE® Brochure - Textured ...
Disaster Resistant Construction Practices - Shelter Centre
Pure Color HP Pure Color HP - Invicon Chemical Solutions Gmbh
Vandex Protects Drinking Water
Mapecem Premix Mapecem Premix - Northland Construction Supplies
23. masses, paints, chemicals, papers
Mapelastic Smart Mapelastic Smart - Specialtyproducts.net
En Büyük Seramik Fuarı Cersaie'de - Seramik Federasyonu
Choose The Right Cement Brochure - Lafarge in South Africa
Holds Art Exhibit - National Ready Mixed Concrete Association