Views
7 months ago

construction chemicals

MegaFilm Eko Surface

MegaFilm Eko Surface Preparatory Primer PRODUCT DESCRIPTION Polymer emulsion based, ready to use primer, which stabilizes the water absorbance of concrete and plaster surfaces prior to application, and enhances the adherence by ensuring the dusting that may have emerged on the surface to be retained on the surface, and which does not contain solvents. AREAS OF USE MegaFilm Eko is used in advance of the ceramic adhesive for the preparation of such surfaces as mortar, gas concrete, briquette, concrete, trowel coating, plaster, and wooden surfaces through the reduction of the water absorption of the same or prior to coating material application. It is suitable for use on indoors and outdoors horizontal and vertical surfaces. PRODUCT ADVANTAGES • Gives satisfactory results for the surfaces that require adherence. • Prevents dusting, penetrating to the surface, thanks to its impregnating nature. • Reduces surface absorption and renders the surface ready for application. • Contributes to the formation of a dust free surface. • A ready to use product which is applied easily and rapidly. • Free from solvents, and environmentally friendly. REFERENCE STANDARDS Certifications/Standards TSE K 208 Ministry of Public Works and Settlement Item No. Ministry of Public Works and Settlement Item No.: 04.466/2 QUALITY CERTIFICATES Conformant to TSE K 208. CE APPLICATION PROCEDURE Application Surfaces Indoors and Outdoors Walls; - Cement based plaster - Gas concrete - Briquette - Concrete - Betopan - Plasterboard - Wooden Indoors and Outdoors Floors; - Cement based trowel coating - Concrete Surface and Ambient Temperature The surface and ambient temperature should be between +5°C and +35°C whilst at application. Application Limits Useful time for product - Pot life Stand by period between coats Required stand by period for final coat The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. APPLICATION INSTRUCTIONS Mixing Ratio MegaFilm Eko is a ready to use product. Mixing Equipment MegaFilm Eko is a ready to use product. Mixing Period MegaFilm Eko is a ready to use product. Application Equipment • Brush • Roller Equipment Cleaning The equipment used should be cleaned with water following the application before the product dries. TECHNICAL PROPERTIES Chemical Structure: Polymer emulsion based primer Density: 1.00 ± 0.1 gr/cm 3 pH: 8 - 9 Color: Light green CONSUMPTION Recommended consumption amount for single coat application on 1 m 2 surface is 0.10 - 0.20 kg. The said value may vary, depending on the surface and ambient conditions. PACKAGING MegaFilm Eko is delivered in net 10 kg plastic drums. Maximum 1 hour Minimum 1 hour Minimum 2 hours Surface Preparation • The application surface should be dry, clean, sound and dust free, and should have been cleansed of oil, dirt or any materials that may prevent adhesion, and any such materials as mortar and cement residues should be scraped from the application surface. • The surface defects, which are deeper than 1 cm, should be repaired with MegaTamir İ or MegaTamir K 24 hours in advance. In the cases, where structural repair mortar should be used; MegaTamir İ Yapısal or MegaTamir K Yapısal should be preferred. Application Methods • MegaFilm Eko should be shaken prior to application, and be, then, applied to the surface homogenously with a brush or a roller. Application Recommendations • The product should be kept homogenous by, where necessary, stirring it intermittently during the application. • The product should, once mixed, be used before the expiration of its pot life. Any product, the pot life of which has expired, should not be used during the application. • MegaFilm Eko is a ready to use product. Any foreign material should not be added into the product during the application. • The product should not be diluted into the water was added. • The product should not be applied on unsound surfaces. The soundness and the load bearing capacity of old surfaces should be checked prior to adhesion. • The surface should be preserved from air currents and water contact during the application. • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing. • Due care should be taken to ensure that the material is not exposed to direct sunlight in hot weather conditions. • The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance. • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 12 hours. • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595) SHELF LIFE The shelf life of the product is 12 months when stored within non tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. STORAGE CONDITIONS The product should be stored within non tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. It should not be exposed to direct sunlight. The container of the product should be closed firmly when not used. SAFETY PRECAUTIONS Please refer to the Safety Data Sheet (SDS) as appropriate for easy and safe application. 123

MegaFilm Visko Environmental Friendly Surface Preparatory Primer, Which Prepares Ceramic And Glassy Surfaces For Adhesion PRODUCT DESCRIPTION Polymer emulsion based solvent free, ready to use surface preparatory primer with filling, which is used prior to adhesion for ceramic on ceramic and ceramic on wood applications in indoors and outdoors spaces. AREAS OF USE MegaFilm Visko is used for surface preparation purposes before the adhesion of the coating materials to be applied subsequently on such glassy surfaces as ceramic and mosaic and on wooden based surfaces. It is suitable for use on indoors and outdoors horizontal and vertical surfaces. PRODUCT ADVANTAGES • “GEV EC1 Plus” certified and is an environmentally friendly product. • In the case of ceramic on ceramic applications, the product is applied as binder and ensures the adhesion of the new coating materials, eliminating the requirement of the breakage of the former ceramic surface. • Prevents the wastes that would have emerged as a consequence of the former ceramic surface. • An economically efficient product and saves workmanship costs. • Enhances the surface adherence of the material to be applied subsequently on glassy surfaces. • A ready to use product which is applied easily and rapidly. • Free from solvents, and environmentally friendly. REFERENCE STANDARDS Certifications/Standards TSE K 208 Ministry of Public Works and Settlement Item No. Ministry of Public Works and Settlement Item No.: 04.466/3 QUALITY CERTIFICATES Conformant to TSE K 208. CE GEV Emicode EC1 Plus APPLICATION PROCEDURE Application Surfaces Indoors and Outdoors Walls; - Ceramic coating - Glassy surfaces - Mosaic - Wooden Indoors and Outdoors Floors; - Ceramic coating - Glassy surfaces - Mosaic Surface Preparation • The application surface should be dry, clean, sound and dust free, and should have been cleansed of oil, dirt or any materials that may prevent adhesion, and any such materials as mortar and cement residues should be scraped from the application surface. • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595) Surface and Ambient Temperature The surface and ambient temperature should be between +5°C and +35°C whilst at application. Application Limits Useful time for product - Pot life Stand by period between coats Required stand by period for final coat The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. APPLICATION INSTRUCTIONS Mixing Ratio MegaFilm Visko is a ready to use product. Mixing Equipment MegaFilm Visko is a ready to use product. Mixing Period The Product should be kept homogenous by stirring it intermittently during the application. Application Equipment • Brush • Roller Equipment Cleaning The equipment used should be cleaned with water following the application before the product dries. TECHNICAL PROPERTIES Chemical Structure: Polymer emulsion based primer with filling Density: 1.55 ± 0.05 gr/cm 3 pH: 8 - 9 Color: Pink CONSUMPTION Recommended consumption amount for application in roughly 1 mm thickness on 1 m 2 surface is 0.15 - 0.20 kg. The said value may vary, depending on the surface and ambient conditions. PACKAGING MegaFilm Visko is delivered in net 1 kg and 3.5 kg plastic buckets. Maximum 1 hour Minimum 1 hour Minimum 3 hours SHELF LIFE The shelf life of the product is 12 months when stored within non tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. 124 Application Methods • MegaFilm Visko is used without being thinned. The product should be mixed until a homogenous mixture is obtained prior to use. The product should be applied to the surface homogenously with a brush or roller. Application Recommendations • The product should be kept homogenous by, where necessary, stirring it intermittently during the application. • The product should, once mixed, be used before the expiration of its pot life. Any product, the pot life of which has expired, should not be used during the application. • MegaFilm Visko is a ready to use product. Any foreign material should not be added into the product during the application. • The product should not be diluted into the water was added. • The product should not be applied on unsound surfaces. The soundness and the load bearing capacity of old surfaces should be checked prior to adhesion. • The surface should be preserved from air currents and water contact during the application. • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing. • Due care should be taken to ensure that the material is not exposed to direct sunlight in hot weather conditions. • The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance. • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 12 hours. STORAGE CONDITIONS The product should be stored within non tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. It should not be exposed to direct sunlight. The container of the product should be closed firmly when not used. SAFETY PRECAUTIONS Please refer to the Safety Data Sheet (SDS) as appropriate for easy and safe application.

Paver Reneu Bro 8.5x11 - Vexcon Chemicals
Planicrete AC Planicrete AC - Northland Construction Supplies
Chemicals For Sustainable Construction - Roof & Facade
Construction Chemicals Market Revenue and Value Chain 2014-2020
Flooring Systems Brochure Download (938Kb) - Triton Chemicals
India Construction Chemicals Market
Nanotechnology and Construction
Pure Color HP Pure Color HP - Invicon Chemical Solutions Gmbh
BASF CC Brochure - BASF Construction Chemicals Pacific
Ground Gas Barriers Brochure Download - Triton Chemicals
Mapecem Premix Mapecem Premix - Northland Construction Supplies
Durable Connections - BASF Construction Chemicals Pacific
Module 4 - Construction of a gravity fed system
Superior Products Coating Products Line Brochure
Mapecem Premix Mapecem Premix - Northland Construction Supplies
Planicrete AC Planicrete AC - Northland Construction Supplies
Basic Construction Materials - Icee.usm.edu