Views
9 months ago

construction chemicals

MegaAntiFreeze 10

MegaAntiFreeze 10 Anti-Freeze Mortar And Concrete Additive For Cold Weather Conditions PRODUCT DESCRIPTION An anti-freeze liquid concrete and mortar additive without chloride content that enhances the applicability in cold weather conditions of the cement mixes, to which it is added. AREAS OF USE MegaAntiFreeze 10 is suitable for use as anti-freeze for all cement mortars and concrete in cases, where frost is expected, in constantly cold weather conditions, in such conditions, where mild frost is at issue throughout the day, in such cases, where sudden temperature drops are likely. PRODUCT ADVANTAGES • Enhances the resistance of mortar and concrete against frost. • Improves the early strength of concrete or mortar in cold weather condition or against the impact of frost. • Free from chloride, and does not harm the concrete or the reinforcement. • Shortens the mold removal and workmanship time in cold weather conditions. PERFORMANCE Relative density 1.10 - 1.14 gr/l Solid matter content T ≥ 20 % The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. REFERENCE STANDARDS Certifications/Standards ASTM C - 494 Type C TS EN 934 - 2 Ministry of Public Works and Settlement Item No. Ministry of Public Works and Settlement Item No.: 04.613/7 QUALITY CERTIFICATES Conformant to ASTM C - 494 Type C and TS EN 934 - 2. APPLICATION PROCEDURE Application Surfaces MegaAntiFreeze 10 should be added to the water used for mixing the concrete or mortar. Mixing Period The appropriate mixing period applicable for the mortar or the concrete mixed should be taken into consideration. Application Equipment The appropriate mixing equipment for the product to be applied should be used. Equipment Cleaning The appropriate equipment cleaning for the product to be applied should be performed. TECHNICAL PROPERTIES Appearance/Color: Liquid, light yellow Density: 1.12 ± 0.02 gr/cm 3 pH: 5 - 6 Freezing Point: -10°C CONSUMPTION The product should be used in such mass that is 1% equal to the weight of the cement content within the mortar. (The consumption amount may range between 1 % and 3 % depending on the ambient conditions and the structure of the materials within the mixture.) PACKAGING MegaAntiFreeze 10 is delivered in net 30 kg plastic drums. SHELF LIFE The shelf life of the product is 12 months when stored within non-tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. STORAGE CONDITIONS The product should be stored within non-tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. Store in a cool and dry environment. The package of the product should not be allowed to be exposed to frost or severe weather conditions. The container of the product should be closed firmly when not used. SAFETY PRECAUTIONS Please refer to the Safety Data Sheet (SDS) as appropriate for easy and safe application. Surface Preparation The product does not require any surface preparation. Application Methods • MegaAntiFreeze 10 should be added along with the mixing water or subsequent to the mixing. • The Product should be added to the mixing water in such mass that weighs equal to 1% of the cement's weight. When added directly to the concrete, the mixing time should be elongated for 2 to 3 minutes. Application Recommendations • Any snow, ice and frost should be completely removed from the zone, where the concrete or the mortar is to be placed. • The mixing instruction for the product should be followed. The product should not be added directly to the cement. • The compounds within the concrete or the mortar should be preserved from the impacts of frost. • Due care should be taken to ensure that the difference between the temperature of surfaces, to which the concrete or the mortar is to contact, and the temperature of the mortar applied is not excessively high. The temperature of the concrete or the mortar should be increased by heating the application zone in cases, where necessary. • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595) Surface and Ambient Temperature The surface and ambient temperature should be between +5°C and +15°C whilst at application. APPLICATION INSTRUCTIONS Mixing Ratio The product should be added to the mixing water in such mass that weighs equal to 1 % of the cement's weight. Mixing Equipment The appropriate mixing equipment for the product to be applied should be used. 131

MegaKalıp MY Instant Mineral Oil Based Release Agent PRODUCT DESCRIPTION An environmental friendly release agent, which enables convenient release of concrete from the mold and so obtainment of concrete with smooth surface. AREAS OF USE MegaKalıp MY can be used for steel, plastic, plywood and wooden mold systems. The product enables the release of the concrete from the mold smoothly and free from stains. PRODUCT ADVANTAGES • Enables convenient release of molds from concrete surfaces. • Ensures excellent concrete surface quality. • Does not leave stains on mold items, facilitates the cleaning of the same, and ensures excellent protection. The product elongates the economic life of the mold. • Prevents the formation of deposits thanks to its cleaning features. • It’s a biologically decayable, non-toxic product. • Does not leave any traces on the concrete surface and does not penetrate into the concrete mix. • A ready to use product, which is applied easily and rapidly. PERFORMANCE Density at 15 o C 0.865 gr/cm 3 ASTM D 4052 Flashing point 185 ASTM D 93 Cinematic viscosity at 40 o C 13.7 cSt ASTM D 445 Refractive index 1.4855 ASTM 1747 The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions. REFERENCE STANDARDS Certifications/Standards TS 12153 Ministry of Public Works and Settlement Item No. Ministry of Public Works and Settlement Item No.: 04.116/2 QUALITY CERTIFICATES TSE (Class L) - Molding Oils (Group B) Mixing Period MegaKalıp MY is a ready to use product. Application Equipment • Spray gun • Roller • Brush Equipment Cleaning The equipment used should be cleaned with hot water and detergent following the application. TECHNICAL PROPERTIES Chemical Structure: Mineral oil based release agent Density: 0.865 gr/cm 3 Cinematic Viscosity (40°C): 13.7 cSt CONSUMPTION Appropriate consumption volume for surface with surface area around 20 - 40 m 2 is 1 liter. The said value may vary depending on the surface condition and the type of mold used, and the count of use. PACKAGING MegaKalıp MY is supplied in 30 liter plastic drums and 210 liter steel barrels. SHELF LIFE The shelf life of the product is 3 years when stored within non tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. STORAGE CONDITIONS The product should be stored within non-tampered original packaging in dry (maximum relative humidity 60 %) and cool (ambient temperature between +5°C and +25°C) environment. It should not be exposed to direct sunlight. The container of the product should be closed firmly when not used. SAFETY PRECAUTIONS Do use goggles and glows during application. Please refer to the Safety Data Sheet (SDS) as appropriate for easy and safe application. APPLICATION PROCEDURE Application Surfaces • Steel • Plastic • Plywood • Wooden molds • Tunnel - formed molds Surface Preparation There should not be any chemical wastes or residues (diesel oil, gas etc.) on the mold surfaces, and particularly in the cases, where the release agent employed is changed, the surfaces must be cleaned to be free from any residues of any previous release agent used. Application Methods The product is applied via spraying, roller or brush on clean mold surfaces. Due consideration should be given to apply minimum amount of product in the thinnest layer practicable. Application Recommendations • Excessive use of oil would lead to the formation of stains on the concrete; therefore, any extra oil on the surface should be cleaned via a sponge, cloth etc. • In case of highly absorbent surfaces, a second layer should be applied where necessary. • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595) Surface and Ambient Temperature The surface and ambient temperature should be between +10°C and + 35°C whilst application. APPLICATION INSTRUCTIONS Mixing Ratio MegaKalıp MY is a ready to use product. Mixing Equipment MegaKalıp MY is a ready to use product. 132

Paver Reneu Bro 8.5x11 - Vexcon Chemicals
maxicoll 2013 catalog
Nanotechnology and Construction
Mapelastic
Module 4 - Construction of a gravity fed system
Mapecem Premix Mapecem Premix - Northland Construction Supplies
Case Study - Triton Chemicals
Ground Gas Barriers Brochure Download - Triton Chemicals
TILING TECHNOLOGIES - Bostik
PIPELINE REHABILITATION – PROTEGOL ... - TIB Chemicals AG
Flooring Systems Brochure Download (938Kb) - Triton Chemicals
Machines, Equipments and Systems for Tunnel Construction
Planicrete AC Planicrete AC - Northland Construction Supplies
Construction Chemicals Market
Health and Safety Data Sheets for Cements and Cement Products
Applying An External Chemical Stimulus
Chemicals For Sustainable Construction - Roof & Facade
Click here for PDF Guide - Womersleys
Newsdesk - Triton Chemicals
Newsdesk - Triton Chemicals
Summer 2010 - Triton Chemicals
CuStom ComPlete - Custom Building Products
series - Chemical Design Corporation
Epoxy Coatings Brochure - Euclid Chemical Co
AGC Chemicals Product Range - AGCCE
TEX•COTE® XL-70® BRIDGE•COTE® Brochure - Textured ...
Antigelo S - Mapei
Grand Housing Development Program Volume III - Gtz
Soak the buildup, let EZEE Clean work awhile, then ... - IMER USA.
manual for supervisors and project staff - International Recovery ...